Page 6 of 8 FirstFirst ... 45678 LastLast
Results 51 to 60 of 80

Thread: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

  1. #51
    Join Date
    May 2008
    Beans
    91
    Distro
    Kubuntu Development Release

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    ZTE k3805-z USB pen works with wvdial, as long as one uses wvdialconf before the first run and uses *99***1# as the phone number (you may have also to add "Stupid mode = 1" to wvdial.conf).

  2. #52
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    hi pedrogfrancisco

    The k3805-z has a icera chipset , and may need special init codes and udev rules to enable the device to use the cdc_ether connection, if using wvdial can check which interface is been used with "ifconfig" command

    if only showing as standard ppp connection , then possible to point you in a direction, as to which sofware may work with this device, to enable use of cdc_ether connect

    if have read first post as regards New Devices , using the "usb-devices" or "lsusb -t" or "lsusb -v" may show if it has a cdc_ether interface

    regards

    alexfish
    Last edited by alexfish; February 26th, 2011 at 12:03 PM.
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  3. #53
    Join Date
    May 2008
    Beans
    91
    Distro
    Kubuntu Development Release

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    It works on Ubuntu 11.04
    To anyone else reading this:
    The two times I tried it didn't work the first time, connect a second and third time before giving up. Also, doing ifconfig usb0 -arp may or may not help, didn't experiment enough times.

  4. #54
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    Natty users: Betavine: BCM connection manager ( Vodafone devices)

    BCM failing to initialize ;

    test BCM from the terminal,
    Code:
    bcm
    if you get the following error message
    Traceback (most recent call last):
    File "/usr/bin/bcm", line 10, in <module>
    from wader.common.utils import save_file, get_file_data
    ImportError: No module named wader.common.utils
    you will need to create a symlink for python 2.6 to 2.7 (wader)
    Code:
    sudo ln -s /usr/local/lib/python2.6/dist-packages/wader /usr/local/lib/python2.7/dist-packages/wader
    of note the dbus spec is not same

    this is the diff between the existing BCM and the modem-manager
    Code:
    --- /etc/dbus-1/system.d/org.freedesktop.ModemManager.conf    2011-06-07 16:09:55.799695594 +0100
    +++ /etc/dbus-1/system.d/org.freedesktop.ModemManager.conf.dpkg-new    2011-04-11 00:09:10.000000000 +0100
    @@ -5,12 +5,10 @@
       <!-- This config allows anyone to control ModemManager -->
     
       <policy context="default">
    -    <allow own="org.freedesktop.ModemManager.Modem.Gsm.SMS"/>
         <allow send_destination="org.freedesktop.ModemManager"/>
       </policy>
     
       <policy user="root">
    -    <allow own="org.freedesktop.ModemManager.Modem.Gsm.SMS"/>
         <allow own="org.freedesktop.ModemManager"/>
       </policy>
    to view the bits check before install and after ;; save a coppy , of each it may save you a headache , if know how to use it
    Code:
    cat /etc/dbus-1/system.d/org.freedesktop.ModemManager.conf
    RE: Wader-core , now available as for (Precise Pangolin), if have Next Generation Huawei device , possibly look to Huawie Mobile Partner first . RE foot of post #60

    alexfish
    Last edited by alexfish; February 21st, 2012 at 09:11 PM. Reason: cat /etc/dbus-1/system.d/org.freedesktop.ModemManager.conf
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  5. #55
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    Part of Betavine Site has show to be using invalild security certificate (14 Aug 2011) so have copied the data

    Copy of Betavine Know Working devices

    Huawei devices that work with bcm


    • Huawei B970
    • Huawei E1550
      • Note: the E1550 Sometimes requires prodding with Sakis3g to get it recognized (modeswitch, setup TTY, register network).
    • Huawei E160B
    • Huawei E172
    • Huawei E220
    • Huawei E270
    • Huawei E272
    • Huawei E3735
    • Huawei E510
    • Huawei E620
    • Huawei E630
    • Huawei E660a
    • Huawei E870
    • Huawei EM730V
    • Huawei EM770
    • Huawei K2540
    • Huawei K3520
    • Huawei K3565
    • Huawei K3565rev2
    • Huawei K3715
    • Huawei K3765
    • Huawei K4505

    Huawei Devices that do not work with bcm as of 2011-02-28


    • Huawei E153

    ZTE


    • ZTE K2525
    • ZTE K3520-Z
    • ZTE K3565-Z
    • ZTE K3570-Z
    • ZTE K3571-Z
    • ZTE K3765-Z
    • ZTE K3805-Z
    • ZTE K4505-Z
    • ZTE MF651

    Option


    • Option Colt
    • Option E3730
    • Option Fuji-Lite(PPPD)
    • Option Etna(PPPD)
    • Option Etna(NDIS)
    • Option Globe Surfer Icon
    • Option GT Fusion
    • Option GT Fusion Quad-lite
    • Option GTM378
    • Option GTMAX36
    • Option Icon
    • Option K3760
    • Option Nozomi(Needs update to gudev parsing)

    Sierra Wireless


    • Sierrawireless 875
    • Sierrawireless MC8755

    Sony Ericsson


    • Sony Ericsson K610i
    • Sony Ericsson K618i

    Ericsson


    • Ericsson MD300
    • Ericsson F3307
    • Ericsson F3507g
    • Ericsson F3607gw

    Dell


    • Dell D5520
    • Dell D5530
    • Dell D5540

    Novatel


    • Novatel U630(Needs update to gudev parsing)
    • Novatel U740
    • Novatel XU870
    • Novatel X950
    • Novatel MC950D
    • Novatel MC990D
    • Novatel MiFi2352

    Nokia


    • Nokia 6230
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  6. #56
    Join Date
    Aug 2011
    Beans
    327
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    Thankfully all the major network in Philippines work right out of the box, in case of Smart, all one needs is to enter smartbro in APN, in case of SUN its fbband and viola, net works real good, only hitch in Philippines is upgrading the subscription as it needs a Windows based applet. For Postpaid, its not an issue.

  7. #57
    Join Date
    Oct 2009
    Beans
    2

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    Hi,

    I went through the above processes and all was fine up to the command:

    echo -e "AT+CPIN?\r" > /dev/ttyUSB2

    This command gave me the error:

    +CME ERROR: 10

    When I run the command:

    sudo sakis3g

    I get the error:

    Modem responded "ERROR" while checking for PIN.

    Does this mean that I have locked my SIM?

    When I put the SIM in a mobile phone the simPID works but the phone gives and error:

    SIM card not valid

    I thought that this might mean that the Telstra SIM card isn't registered to run on my phone which has a vodafone SIM. Something about having to unlock the vodafone SIM before changing to another SIM.

    I am running on an ASUS eePC 10H:

    Ubuntu 11.04 - the Natty Narwhal
    Telstra Ultimate AirCard 312U Sierra Wireless USB modem

    Can someone help me get my mobile broadband working?

    Thanks.


    John H.

  8. #58
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    Quote Originally Posted by jhock View Post
    Hi,

    I went through the above processes and all was fine up to the command:

    echo -e "AT+CPIN?\r" > /dev/ttyUSB2

    This command gave me the error:

    +CME ERROR: 10

    When I run the command:

    sudo sakis3g

    I get the error:

    Modem responded "ERROR" while checking for PIN.

    Does this mean that I have locked my SIM?

    When I put the SIM in a mobile phone the simPID works but the phone gives and error:

    SIM card not valid

    I thought that this might mean that the Telstra SIM card isn't registered to run on my phone which has a vodafone SIM. Something about having to unlock the vodafone SIM before changing to another SIM.

    I am running on an ASUS eePC 10H:

    Ubuntu 11.04 - the Natty Narwhal
    Telstra Ultimate AirCard 312U Sierra Wireless USB modem

    Can someone help me get my mobile broadband working?

    Thanks.


    John H.
    for error codes can look here
    http://www.smssolutions.net/tutorial...gsmerrorcodes/

    if having incompatible problems with equipment then look to your isp or supplier,
    regards

    alexfish
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  9. #59
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 10.10 : 10.04 : 9.10 ]

    RE 11.04 may apply to 11.10

    Note:

    Do not install usb_modeswitch from debian ;if have upgraded and and wondered why the device no longer works :
    Answer usb_modeswitch debian may have a different dispatcher

    Device not switching

    try connect at boot and also after boot

    Still not switching try the Disk Utility .
    if the device list as sr* the chances are it may switch by using the the eject command

    check for changes in the usb IDs with the lsusb command from the terminal

    If the device has change IDs then it indicates switching

    List the new ids with the lsusb Command " lsusb -t -d ****:**** " : edit the ****:**** for the device

    IE:
    Code:
    lsusb -t -d 19d2:0031
    Example output
    Code:
    /:  Bus 02.Port 1: Dev 1, Class=root_hub, Driver=ohci_hcd/10p, 12M
        |__ Port 1: Dev 2, If 0, Class=HID, Driver=usbhid, 1.5M
        |__ Port 1: Dev 2, If 1, Class=HID, Driver=usbhid, 1.5M
    /:  Bus 01.Port 1: Dev 1, Class=root_hub, Driver=ehci_hcd/10p, 480M
        |__ Port 2: Dev 3, If 0, Class=stor., Driver=usb-storage, 480M
        |__ Port 8: Dev 30, If 0, Class=vend., Driver=option, 480M
        |__ Port 8: Dev 30, If 1, Class=vend., Driver=option, 480M
        |__ Port 8: Dev 30, If 2, Class=stor., Driver=usb-storage, 480M
        |__ Port 8: Dev 30, If 3, Class=vend., Driver=option, 480M
    the above shows the device has configured and drivers are bound to the device

    if most of the above shows
    Driver=,****
    then the device has not fully configured

    can check by
    Code:
    ls -al /dev/serial/by-id/*
    this should show the device and the ports it is connected to

    Example
    Code:
    /dev/serial/by-id/usb-ZTE_Incorporated_ZTE_CDMA_Technologies_MSM_1234567890ABCDEF-if00-port0 -> ../../ttyUSB0
    /dev/serial/by-id/usb-ZTE_Incorporated_ZTE_CDMA_Technologies_MSM_1234567890ABCDEF-if01-port0 -> ../../ttyUSB1
    /dev/serial/by-id/usb-ZTE_Incorporated_ZTE_CDMA_Technologies_MSM_1234567890ABCDEF-if03-port0 -> ../../ttyUSB2
    if an err = cannot access /dev/serial/by-id/$: No such file or directory . then the device has not configured


    No driver loading then best try sakis3g , use the sakis3g setup option , it may find a suitable driver and load it.

    Device still not recognized

    see if your device is supported on Ubuntu
    Code:
    tar tf /usr/share/usb_modeswitch/configPack.tar.gz
    this will list the device database , if the device is listed and not switching then there is a problem

    follow this change the device id highlighted in blue for the device
    Code:
    sudo su
    
    cd /etc/usb_modeswitch.d
    
    tar -x 19d2:2000 -f /usr/share/usb_modeswitch/configPack.tar.gz
    
     usb_modeswitch -W -c /etc/usb_modeswitch.d/19d2:2000
    note if there are any changes
    :
    Not switching report bugs to Ubuntu
    Device not listed : Please refer to usb_modeswitch for guidance
    Drivers not loading try sakis3g if may find a suitable driver : if this fails assume device is not supported at present ,or report bugs to Ubuntu

    How to check driver modules remember to change the device ID's in blue
    search the current kernel : all letters must be in upper case
    EXAMPLE
    Code:
    grep -i v12D1p1436 /lib/modules/`uname -r`/modules.alias
    search all kernels
    Code:
    grep -i v12D1p1436 /lib/modules/*/modules.alias
    Example output from current kernel
    Code:
    alexfish@alexfish-desktop:~$ grep -i v12D1p1436 /lib/modules/`uname -r`/modules.alias
    alias usb:v12D1p1436d0000dc*dsc*dp*ic*isc*ip* usb_storage
    alias usb:v12D1p1436d*dc*dsc*dp*icFFiscFFipFF* option
    red bit = driver module
    Note This: from the above have place *'s at the appropriate
    could be a pointer to device which does not change Ids , or could be problematic , if a problem can try sakis3g with the no storage option
    look through your log files if the device is disconnecting and reconnecting:: link to sakis3g forum , Re: tty_send_command

    Code:
    alias usb:v12D1p1436d0000dc*dsc*dp*ic**isc**ip* usb_storage
    alias usb:v12D1p1436d****dc*dsc*dp*icFFiscFFipFF* option
    if the device lists and the module is not loading
    Code:
    sudo modprobe <driver>
    Note: all new usb_modeswitch device switching data should be placed in the /etc/usb_modeswitch.d folder

    If have upgraded to Debian Packages and the device is not switching then it could be the usb_modeswitch dispatcher

    Reinstall the Ubuntu version of usb_modeswtch + the data

    if can't role back the version and have saved a copy of the original dispatcher try
    Code:
    gksu nautilus
    go to the usb_modeswitch_dispatcher(copy) : ensure named "usb_modeswitch_dispatcher" copy it

    goto the /usr/sbin/

    remove the usb_modeswitch_dispatcher exec (recognized as a diamond) to the rubbish bin

    paste the usb_modeswitch_dispatcher(copy)

    ensure it is named "usb_modeswitch_dispatcher"

    exit the terminal , plug the device in and see what happens

    ALSO CHECK OUT POSTS #60 and #61
    Last edited by alexfish; December 4th, 2011 at 12:55 PM. Reason: sudo
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

  10. #60
    Join Date
    Oct 2009
    Location
    A world without windows
    Beans
    Hidden!

    Re: How To : Mobile Broadband Connections [ Ubuntu 11.04 : 10.10 : 10.04 : 9.10]

    First Read Foot of page, RE: IMPORTANT NOTIFICATION . prior to committing.

    Also worth downloading if at this Post:
    Linux USB drivers : Related post #68

    how to find a suitable module
    : try this
    Code:
    grep usb /sys/bus/usb/devices/*/modalias
    look through the list to identify the device
    example
    Code:
    alexfish@alexfish-desktop:~$ grep usb /sys/bus/usb/devices/*/modalias
    /sys/bus/usb/devices/1-0:1.0/modalias:usb:v1D6Bp0002d0206dc09dsc00dp00ic09isc00ip00
    /sys/bus/usb/devices/1-2:1.0/modalias:usb:v059Bp047Ad0000dc00dsc00dp00ic08isc06ip50
    /sys/bus/usb/devices/1-8:1.0/modalias:usb:v19D2p0031d0000dc00dsc00dp00icFFiscFFipFF
    /sys/bus/usb/devices/1-8:1.1/modalias:usb:v19D2p0031d0000dc00dsc00dp00icFFiscFFipFF
    /sys/bus/usb/devices/1-8:1.2/modalias:usb:v19D2p0031d0000dc00dsc00dp00ic08isc06ip50
    /sys/bus/usb/devices/1-8:1.3/modalias:usb:v19D2p0031d0000dc00dsc00dp00icFFiscFFipFF
    /sys/bus/usb/devices/2-0:1.0/modalias:usb:v1D6Bp0001d0206dc09dsc00dp00ic09isc00ip00
    /sys/bus/usb/devices/2-1:1.0/modalias:usb:v0603p00F2d0112dc00dsc00dp00ic03isc01ip01
    /sys/bus/usb/devices/2-1:1.1/modalias:usb:v0603p00F2d0112dc00dsc00dp00ic03isc00ip00
    take the last 4 bits of the modalias of each line of the device and check all
    from example
    Code:
    /sys/bus/usb/devices/1-8:1.3/modalias:usb:v19D2p0031d0000dc00dsc00dp00icFFiscFFipFF
    : use "ipFF"

    find a suitable driver
    say for instance
    normal usb devices like cdma and option drivers
    Code:
    grep -i ipFF /lib/modules/`uname -r`/modules.alias
    fast interface devices
    Code:
    grep -i ip00 /lib/modules/`uname -r`/modules.alias
    look through the list,

    Example of List (part of)
    Code:
    alias usb:v12D1p1401d*dc*dsc*dp*icFFiscFFipFF* option
    alias usb:v12D1p1004d*dc*dsc*dp*icFFiscFFipFF* option
    alias usb:v12D1p1003d*dc*dsc*dp*icFFiscFFipFF* option
    alias usb:v12D1p1001d*dc*dsc*dp*icFFiscFFipFF* option
    alias usb:v106Cp3718d*dc*dsc*dp*icFFiscFFipFF* qcaux
    alias usb:v1199p6892d*dc*dsc*dp*icFFiscFFipFF* sierra
    alias usb:v1199p6891d*dc*dsc*dp*icFFiscFFipFF* sierra
    alias usb:v1199p6890d*dc*dsc*dp*icFFiscFFipFF* sierra
    check your device modalias listing IE:
    Code:
    usb:v19D2p0031d0000dc00dsc00dp00icFFiscFFipFF
    copy and paste the device modalias + a line from the grep modules ;
    Now use * to line up the two modalias :: look at the pattern
    Example
    Code:
    usb:v19D2p0031d0000dc00dsc00dp00icFFiscFFipFF
    usb:v1199p6891d****dc**dsc**dp**icFFiscFFipFF* sierra
    if the driver looks promising ; load the driver. use the modprobe <module>
    example
    ]
    Code:
    sudo su
    modprobe sierra
    check the system to see if a file new-id ; usualy in the path /sys/bus/drivers/<module name>/new_id
    Code:
    ls /sys/bus/usb/drivers/*/module/drivers/*/new_id
    this gives the path
    Code:
    /sys/bus/usb/drivers/sierra/module/drivers/usb-serial:sierra/new_id
    Huawie Mobile Partner (Drivers) if you have installed the drivers then if connected via usb port , the net part shows as
    Code:
    /sys/bus/usb/drivers/huawei_ether/module/drivers/usb:huawei_ether/new_id
    The Actual Driver is " hw_cdc_driver" try "modinfo hw_cdc_driver" to see details.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~

    Here is a example of a device which normally uses the option driver
    to force the driver example change the ID's of the device highlighted in blue : Also not the change from upper case to lower case
    Code:
    sudo su
     echo "19d2 0031" > /sys/bus/usb/drivers/sierra/module/drivers/usb-serial:sierra/new_id
    check the results in the /dev/tty or the dev/serial
    Code:
    ls -al /dev/serial/by-id/*
    also list usb devices with this code
    Code:
    usb-devices
    To List the modules by vendor remember to change the id in blue, and note the lower case if lsusb listing is "19D2 then = 19d2"
    Code:
    grep -i v19d2 /lib/modules/`uname -r`/modules.alias

    USB ID's:
    don,t forget to keep the usb ids up to date
    to view the usb.ids paste this in the browser
    Code:
    file:///var/lib/usbutils/usb.ids
    or can wget daily snapshot

    Code:
    wget http://www.linux-usb.org/usb.ids
    file will be in the home directory , open with your browser
    the info may indicate the type of driver required for the device :IE wimax ,gobi etc etc not always specific , but usually confirmed by the modalias
    to update the usb.ids
    Code:
    sudo /usr/sbin/update-usbids
    Remember before going out to buy the Latest gadget check the device ID's : a little research helps
    Here I am assuming you Are connected by one means or another. if the info not available , It is your decision


    Finally :
    check out #61

    If have a device and found a suitable driver using the above Please report at Launch Pad :also feel free to post Here
    Device description : Device USB-IDs : Driver Module : The Path to the new_id :: IE: echo "19d2 0031" > /sys/bus/usb/drivers/sierra/module/drivers/usb-serial:sierra/new_id"
    OR how it was achieved


    A driver to play about with , try safe-serial use at own risk
    use grep to find devices which can be used
    Code:
    grep -i 02ip /lib/modules/`uname -r`/modules.alias
    below is the modinfo of the driver
    Code:
    :~$ modinfo safe-serial
    filename:       /lib/modules/2.6.38-12-generic/kernel/drivers/usb/serial/safe_serial.ko
    license:        GPL
    description:    USB Safe Encapsulated Serial
    author:         sl@lineo.com, tbr@lineo.com, Johan Hovold <jhovold@gmail.com>
    srcversion:     7F505336AEAE3A308E5D19D
    alias:          usb:v0000p0000d*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v05F9pFFFFd*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v04DDp8004d*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v04DDp8003d*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v04DDp8002d*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v04DDp8001d*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v03F0p2101d*dc02dsc*dp*icFFisc02ip*
    alias:          usb:v049FpFFFFd*dc02dsc*dp*icFFisc02ip*
    depends:        usbserial
    vermagic:       2.6.38-12-generic SMP mod_unload modversions 686 
    parm:           vendor:User specified USB idVendor (required) (ushort)
    parm:           product:User specified USB idProduct (required) (ushort)
    parm:           debug:Debug enabled or not (bool)
    parm:           safe:Turn Safe Encapsulation On/Off (bool)
    parm:           padded:Pad to full wMaxPacketSize On/Off (bool)
    Question What is the deference between searching a hard link and a sym link
    Answer: if your looking to install a driver at connection there is less to look at See Below
    also note the base driver: Example also reason to highlight in BLUE
    /sys/bus/usb-serial/drivers/generic/new_id < This one , say if the option 1 driver will not Bind to the device or Problematic then look to use the base driver example at Post #2 shows the original method to bind to the id's at boot
    /sys/bus/usb-serial/drivers/option1/new_id
    Code:
    1./sys/bus/usb/drivers/option/module/drivers/usb-serial:option1/new_id
    2 . /sys/bus/usb-serial/drivers/option1/new_id
    
    1) ls /sys/bus/usb/drivers/*/module/drivers/*/new_id
    
    /sys/bus/usb/drivers/hub/module/drivers/usb:hub/new_id
    /sys/bus/usb/drivers/hub/module/drivers/usb:usbfs/new_id
    /sys/bus/usb/drivers/option/module/drivers/usb-serial:option1/new_id
    /sys/bus/usb/drivers/uas/module/drivers/usb:uas/new_id
    /sys/bus/usb/drivers/usbfs/module/drivers/usb:hub/new_id
    /sys/bus/usb/drivers/usbfs/module/drivers/usb:usbfs/new_id
    /sys/bus/usb/drivers/usbhid/module/drivers/hid:generic-usb/new_id
    /sys/bus/usb/drivers/usbhid/module/drivers/usb:usbhid/new_id
    /sys/bus/usb/drivers/usbserial_generic/module/drivers/usb-serial:generic/new_id
    /sys/bus/usb/drivers/usbserial/module/drivers/usb-serial:generic/new_id
    /sys/bus/usb/drivers/usb-storage/module/drivers/usb:usb-storage/new_id
    
    2) ls /sys/bus/*/drivers/*/new_id
    
    /sys/bus/hid/drivers/generic-usb/new_id
    /sys/bus/pci/drivers/agpgart-amdk7/new_id
    /sys/bus/pci/drivers/agpgart-intel/new_id
    /sys/bus/pci/drivers/agpgart-nvidia/new_id
    /sys/bus/pci/drivers/agpgart-via/new_id
    /sys/bus/pci/drivers/asiliantfb/new_id
    /sys/bus/pci/drivers/ata_generic/new_id
    /sys/bus/pci/drivers/ata_piix/new_id
    /sys/bus/pci/drivers/ce4100_spi/new_id
    /sys/bus/pci/drivers/C-Media PCI/new_id
    /sys/bus/pci/drivers/ehci_hcd/new_id
    /sys/bus/pci/drivers/forcedeth/new_id
    /sys/bus/pci/drivers/imsttfb/new_id
    /sys/bus/pci/drivers/Intel ICH/new_id
    /sys/bus/pci/drivers/ioapic/new_id
    /sys/bus/pci/drivers/k8temp/new_id
    /sys/bus/pci/drivers/langwell_gpio/new_id
    /sys/bus/pci/drivers/nForce2_smbus/new_id
    /sys/bus/pci/drivers/nvidia/new_id
    /sys/bus/pci/drivers/ohci_hcd/new_id
    /sys/bus/pci/drivers/parport_pc/new_id
    /sys/bus/pci/drivers/pata_acpi/new_id
    /sys/bus/pci/drivers/pata_amd/new_id
    /sys/bus/pci/drivers/pata_sis/new_id
    /sys/bus/pci/drivers/pci_eisa/new_id
    /sys/bus/pci/drivers/pcieport/new_id
    /sys/bus/pci/drivers/pdc_adma/new_id
    /sys/bus/pci/drivers/sata_nv/new_id
    /sys/bus/pci/drivers/serial/new_id
    /sys/bus/pci/drivers/uhci_hcd/new_id
    /sys/bus/usb/drivers/hub/new_id
    /sys/bus/usb/drivers/uas/new_id
    /sys/bus/usb/drivers/usbfs/new_id
    /sys/bus/usb/drivers/usbhid/new_id
    /sys/bus/usb/drivers/usb-storage/new_id
    /sys/bus/usb-serial/drivers/generic/new_id
    /sys/bus/usb-serial/drivers/option1/new_id
    Has anyone got the Huawei E586 working on ubuntu 11.10?

    worth following, but don't know if the outcome will be a success :
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~
    IMPORTANT NOTIFICATION

    HUAWEI PRODUCT E585 (12d1:1446) :3g/4g read

    Example of devices with different switching modes

    http://www.draisberghof.de/usb_modes...opic.php?t=836
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~
    also look at
    HUAWEI PRODUCT E353 (0x1506)
    http://www.kernel.org/pub/linux/kern...hangeLog-3.1.6

    definitely look here
    [SOLVED] Huawei E5832 and Ubuntu 12.04

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~

    have check latest updates on Ubuntu 11.04 as regards this driver cdc-wdm
    so if have Huawei device similar to the above check the Modalias , info for driver shows
    Code:
    alexfish@alexfish-desktop:~$ modinfo cdc-wdm
    filename:       /lib/modules/2.6.38-13-generic/kernel/drivers/usb/class/cdc-wdm.ko
    license:        GPL
    description:    USB Abstract Control Model driver for USB WCM Device Management
    author:         Oliver Neukum
    srcversion:     CAFE8B3EA57870E596D4DA7
    alias:          usb:v*p*d*dc*dsc*dp*ic02isc09ip*
    depends:        
    vermagic:       2.6.38-13-generic SMP mod_unload modversions 686
    You may have to load the driver , then put the device id's into the new id / path
    Code:
    /sys/bus/usb/drivers/cdc_wdm/module/drivers/usb:cdc_wdm/new_id
    According to info it only engages the cdc-ether type interface so will also have to bind the option or usb-serial driver after binding the cdc-wdm driver module
    Note: part of the device Modalias should show
    Code:
    usb:v*p*d*dc*dsc*dp*ic02isc09ip*
    http://lists.openwall.net/netdev/2012/01/20/7

    Please read though the next few posts if have one of these devices


    alexfish
    Last edited by alexfish; March 24th, 2012 at 01:47 PM. Reason: update :
    Two tin cans are better than an iphone

    http://www.ehow.co.uk/how_2067160_ma...hone.html?cr=1

Page 6 of 8 FirstFirst ... 45678 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •