Results 1 to 3 of 3

Thread: New Serval won't boot.

  1. #1
    Join Date
    Mar 2010
    Beans
    50

    New Serval won't boot.

    Hi - I just got my Serval yesterday. While it originally booted fine and loaded the OS and ran for a few hours, now things are not so great.

    The machine it POSTs fine, but while the OS is loading I get a show-stopper message which says:

    "One of more mounts listed in /etc/fstab cannot be mounted: Swap: waiting for uuid=<long alphanumeric string>. Press ESC to enter recovery shell."

    It waits of course. If I press ESC the screen fades to white then dark then stalls totally.

    Interestingly, I have an ubuntu 9.10 disk, and when I put that in the drive and reboot the errors still occur but flash by and the machine runs (more or less) as expected. Not sure why that works but it does.

    What should my next steps be? Is this an /etc/fstab config error I can fix? Was this is a system load error or is it hardware? Or is it just a reload of 9.10?

    thanks

    Reid

  2. #2
    Join Date
    Sep 2006
    Location
    Denver, Colorado
    Beans
    5,638
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: New Serval won't boot.

    It sounds like you chose to encrypt your home partition during the initial set-up.

    Can you boot into recovery mode and then post the output of this command...

    cat /etc/fstab | grep -i swap
    To err is human, to forgive is very ... dog-like.

    Thomas Aaron
    FetchMasters, LLC

  3. #3
    Join Date
    Mar 2010
    Beans
    50

    Re: New Serval won't boot.

    Thanks Thomas. All is working now. I did as asked and have rebooted several time. Problem seems corrected.

    Below is the corrected /etc/fstab, with the erroneous line entry commented out.

    (FYI the board, bad entry is the second-to-last and show this...."UUID=4dcb7a74.....")

    reid@system76-pc:~$ more /etc/fstab
    # /etc/fstab: static file system information.
    #
    # Use 'blkid -o value -s UUID' to print the universally unique identifier
    # for a device; this may be used with UUID= as a more robust way to name
    # devices that works even if disks are added and removed. See fstab(5).
    #
    # <file system> <mount point> <type> <options> <dump> <pass>
    proc /proc proc defaults 0 0
    # / was on /dev/sda1 during installation
    UUID=2c20b79b-bb2c-4422-9d48-d1cc487b189f / ext3 errors=remount-ro 0 1 # /dev/sda1
    # /home was on /dev/sda3 during installation
    UUID=46ad1127-89ed-4d27-886e-3ad3898f9243 /home ext3 defaults 0 2 # /dev/sda3
    # swap was on /dev/sda2 during installation
    # UUID=4dcb7a74-0f73-4f1f-9215-a1dcef29549e none swap sw 0 0 # /dev/sda2
    /dev/mapper/cryptswap1 none swap sw 0 0
    reid@system76-pc:~$



    much obliged.

    Reid

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •