Page 2 of 5 FirstFirst 1234 ... LastLast
Results 11 to 20 of 41

Thread: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

  1. #11
    Join Date
    Mar 2010
    Location
    Australia
    Beans
    5
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Quote Originally Posted by pererik87 View Post
    anyone that can upload linuxwacom-0.8.6.tar.bz2 to this post because i cant get the 0.8.6-1.... to work at all. Ill owe you a pint
    Have you downloaded 0.8.6-1?
    If so just change
    Code:
    tar -xf linuxwacom-0.8.6.tar.bz2
    cd linuxwacom-0.8.6
    To
    Code:
    tar -xf linuxwacom-0.8.6-1.tar.bz2
    cd -linuxwacom-0.8.6-1
    It worked for my CTH-460 Pen & Touch.

    I also just got it to work on my dual monitor system with no problems.
    You do need to add the word 'wacom' to the end of etc/modules for it work after you reboot.
    Code:
    sudo gedit /etc/modules
    Last edited by Balian; May 4th, 2010 at 05:37 PM.

  2. #12
    Join Date
    Dec 2009
    Beans
    16

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Thats what i did, but it failed. Might it work if i reinstall???

  3. #13
    Join Date
    Dec 2005
    Beans
    28
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Unhappy Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Hi!

    I think with the new version 0.8.6-1 your Solution doesn't work, because when you try to compile, the first steep has no problems:

    linuxwacom-0.8.6-1/src/2.6.30$ make
    Building linuxwacom drivers for 2.6 kernel.
    ***Note: Drivers not enabled as modules in your kernel config but requested through configure are NOT built
    make -C /lib/modules/2.6.32-22-generic/build M=/home/catworld/Baixades/linuxwacom-0.8.6-1/src/2.6.30
    make[1]: Entering directory `/usr/src/linux-headers-2.6.32-22-generic'
    Building modules, stage 2.
    MODPOST 0 modules
    make[1]: Leaving directory `/usr/src/linux-headers-2.6.32-22-generic'
    catworld@catworld-XPC:~/Baixades/linuxwacom-0.8.6-1/src/2.6.30$ sudo cp wacom.ko /lib/modules/`uname -r`/kernel/drivers/input/tablet/
    cp: ha fallat stat() sobre «wacom.ko»: No such file or directory
    catworld@catworld-XPC:~/Baixades/linuxwacom-0.8.6-1/src/2.6.30$ cd ..
    catworld@catworld-XPC:~/Baixades/linuxwacom-0.8.6-1/src$ cd ..
    catworld@catworld-XPC:~/Baixades/linuxwacom-0.8.6-1$ ./configure --enable-wacom
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... yes
    checking for a thread-safe mkdir -p... /bin/mkdir -p
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking whether to enable maintainer-specific portions of Makefiles... no
    checking for gcc... gcc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables...
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for style of include used by make... GNU
    checking dependency style of gcc... gcc3
    checking for gawk... (cached) gawk
    checking build system type... x86_64-unknown-linux-gnu
    checking host system type... x86_64-unknown-linux-gnu
    checking for a sed that does not truncate output... /bin/sed
    checking for grep that handles long lines and -e... /bin/grep
    checking for egrep... /bin/grep -E
    checking for ld used by gcc... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for /usr/bin/ld option to reload object files... -r
    checking for BSD-compatible nm... /usr/bin/nm -B
    checking whether ln -s works... yes
    checking how to recognize dependent libraries... pass_all
    checking how to run the C preprocessor... gcc -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking dlfcn.h usability... yes
    checking dlfcn.h presence... yes
    checking for dlfcn.h... yes
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking dependency style of g++... gcc3
    checking how to run the C++ preprocessor... g++ -E
    checking for g77... no
    checking for xlf... no
    checking for f77... no
    checking for frt... no
    checking for pgf77... no
    checking for cf77... no
    checking for fort77... no
    checking for fl32... no
    checking for af77... no
    checking for xlf90... no
    checking for f90... no
    checking for pgf90... no
    checking for pghpf... no
    checking for epcf90... no
    checking for gfortran... no
    checking for g95... no
    checking for xlf95... no
    checking for f95... no
    checking for fort... no
    checking for ifort... no
    checking for ifc... no
    checking for efc... no
    checking for pgf95... no
    checking for lf95... no
    checking for ftn... no
    checking whether we are using the GNU Fortran 77 compiler... no
    checking whether accepts -g... no
    checking the maximum length of command line arguments... 1572864
    checking command to parse /usr/bin/nm -B output from gcc object... ok
    checking for objdir... .libs
    checking for ar... ar
    checking for ranlib... ranlib
    checking for strip... strip
    checking if gcc supports -fno-rtti -fno-exceptions... no
    checking for gcc option to produce PIC... -fPIC
    checking if gcc PIC flag -fPIC works... yes
    checking if gcc static flag -static works... yes
    checking if gcc supports -c -o file.o... yes
    checking whether the gcc linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... yes
    configure: creating libtool
    appending configuration tag "CXX" to libtool
    checking for ld used by g++... /usr/bin/ld -m elf_x86_64
    checking if the linker (/usr/bin/ld -m elf_x86_64) is GNU ld... yes
    checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
    checking for g++ option to produce PIC... -fPIC
    checking if g++ PIC flag -fPIC works... yes
    checking if g++ static flag -static works... yes
    checking if g++ supports -c -o file.o... yes
    checking whether the g++ linker (/usr/bin/ld -m elf_x86_64) supports shared libraries... yes
    checking dynamic linker characteristics... GNU/Linux ld.so
    (cached) (cached) checking how to hardcode library paths into programs... immediate
    appending configuration tag "F77" to libtool
    checking for pkg-config... /usr/bin/pkg-config
    checking pkg-config is at least version 0.9.0... yes
    checking for HAL... no
    checking for arch type... x86_64-linux-gnu
    checking for kernel type... Linux
    checking for linux-based kernel... yes
    checking for kernel source/headers... /lib/modules/2.6.32-22-generic/build
    checking kernel version... 2.6.32-22-generic
    checking for kernel module support... yes
    checking for Xlib... yes
    checking for XSERVER... yes
    checking for xserver libc-wrapper header-files... no
    checking if scaling tablet to screen size is needed... no
    checking if Xorg server is version 1.4 or later... yes
    checking if Xorg is 7.3 or earlier... no
    checking if Xorg server is version 1.5.2 or later... yes
    checking if Xorg server is version 1.6 or later... yes
    checking if Xorg SDK defined IsXExtensionPointer... yes
    checking if Xorg SDK defines dixScreenOrigins... yes
    checking XInput extension version... >= 2.0
    checking for lib xf86config... checking for X... libraries , headers
    checking for gethostbyname... yes
    checking for connect... yes
    checking for remove... yes
    checking for shmat... yes
    checking for IceConnectionNumber in -lICE... yes
    checking for tclsh... /usr/bin/tclsh
    checking for tcl version... 8.4
    checking for tcl header files... found, /usr/include/tcl8.4
    checking for tk header files... found, /usr/include/tcl8.4
    checking ncurses.h usability... yes
    checking ncurses.h presence... yes
    checking for ncurses.h... yes
    checking if libwacomcfg should/can be built... yes
    checking if libwacomxi should/can be built... yes
    checking if wacdump should/can be built... yes
    checking if xidump should/can be built... yes
    checking if xsetwacom should be built... yes
    checking if wacomxrrd should be built... checking X11/extensions/Xrandr.h usability... no
    checking X11/extensions/Xrandr.h presence... no
    checking for X11/extensions/Xrandr.h... no
    checking for Wacom X driver module path... /usr/lib/xorg/modules/input
    checking for dynamic driver loading support... yes
    checking if wacom_drv.{o,so} should be compiled... yes
    checking if gcc accepts -fno-merge-constants... yes
    checking if gcc accepts -fno-stack-protector... yes

    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating mkxincludes
    config.status: creating src/Makefile
    config.status: creating src/util/Makefile
    config.status: creating src/xdrv/Makefile
    config.status: creating src/2.6.9/Makefile
    config.status: creating src/2.6.10/Makefile
    config.status: creating src/2.6.11/Makefile
    config.status: creating src/2.6.13/Makefile
    config.status: creating src/2.6.14/Makefile
    config.status: creating src/2.6.15/Makefile
    config.status: creating src/2.6.16/Makefile
    config.status: creating src/2.6.18/Makefile
    config.status: creating src/2.6.19/Makefile
    config.status: creating src/2.6.22/Makefile
    config.status: creating src/2.6.24/Makefile
    config.status: creating src/2.6.26/Makefile
    config.status: creating src/2.6.27/Makefile
    config.status: creating src/2.6.30/Makefile
    config.status: creating src/wacomxi/Makefile
    config.status: creating src/wacomxi/wacomcpl
    config.status: creating src/include/xdrv-config.h
    config.status: src/include/xdrv-config.h is unchanged
    config.status: creating src/include/kernel-config.h
    config.status: src/include/kernel-config.h is unchanged
    config.status: creating src/include/util-config.h
    config.status: src/include/util-config.h is unchanged
    config.status: executing depfiles commands

    ----------------------------------------
    BUILD ENVIRONMENT:
    architecture - x86_64-linux-gnu
    linux kernel - yes 2.6.30
    module versioning - no
    kernel source - yes /lib/modules/2.6.32-22-generic/build
    XFree86 source - no
    Xorg SDK - yes /usr/include/xorg
    XSERVER64 - yes
    dlloader - yes
    XLib - yes /usr/lib
    xf86config - no
    TCL - yes /usr/include/tcl8.4
    TK - yes /usr/include/tcl8.4
    ncurses - yes

    BUILD OPTIONS:
    wacom.o - yes
    wacdump - yes
    xidump - yes
    libwacomcfg - yes
    libwacomxi - yes
    xsetwacom - yes
    wacomxrrd - no
    hid.o - no
    wacom_drv.so - yes /usr/lib/xorg/modules/input
    wacom_drv.o - no
    wacom*_drv quirks - IsXExtensionPointer key-events dixScreenOrigins
    ----------------------------------------

    but in the second steep, when you try to copy the "modul" it doesn't find:

    linuxwacom-0.8.6-1/src/2.6.30$ ls
    Makefile modules.order wacom.h wacom_wac.c
    Makefile.in Module.symvers wacom_sys.c wacom_wac.h

    /linuxwacom-0.8.6-1/src/2.6.30$ sudo cp wacom.ko /lib/modules/`uname -r`/kernel/drivers/input/tablet/
    cp: ha fallat stat() sobre «wacom.ko»: No such file or directory


    Anybody can help us? TIA

  4. #14
    Join Date
    Feb 2007
    Beans
    32
    Distro
    Kubuntu Development Release

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    to whoever asked for the source file, here's a link: linuxwacom-0.8.6-1.tar.bz2/download

    ctw: it appears that you're actually using kernel 2.6.32, wheras the wacom source seems to only have code for up to 2.6.30. I am in the same situation, and I'm trying to figure out if it's possible to cross compile.
    I'd say that it's likely this is the soruce of your problem. Do you have 2.6.30 on your machine? If so you could try booting using that module, and then compiling, then rebooting into 2.6.33 and using the compiled 2.6.30 module.

    I'll see if I can do it too.
    Last edited by jaxxed; May 5th, 2010 at 11:02 PM.

  5. #15
    Join Date
    Apr 2010
    Location
    Long Beach, CA
    Beans
    5
    Distro
    Ubuntu 10.04 Lucid Lynx

    Talking Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Quote Originally Posted by pererik87 View Post
    Off course when i read this linuxwacom have deleted the file and changed everything. im on the last step.

    sudo rmmod
    ERROR: Module wacom does not exist in /proc/modules
    xxx@xxx-laptop:~/linuxwacom-0.8.6-1/src/2.6.30$

    Any ideas??
    The problem is that there is supposed to be a line between "sudo cp..." and "sudo rmmod wacom".

    After you do "sudo cp wacom.ko /lib/modules/`uname -r`/kernel/drivers/input/tablet", do:

    sudo depmod -a

    and continue on with sudp rmmod wacom and so on.

    source: http://nfolamp.wordpress.com/2010/05...bamboo-ctl460/

    Hope it helps. I was having the same problem for some time too.

  6. #16
    Join Date
    Dec 2009
    Beans
    16

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Thanks for the new ides guys ill try them when i get home.

    I recommend everyone to click the "this bug affects me" in this bug report https://bugs.launchpad.net/ubuntu/+s...4?comments=all

  7. #17
    Join Date
    Mar 2010
    Location
    Australia
    Beans
    5
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    I've just had to reinstall linuxwacom-0.8.6-1 again as I upgraded my kernal to 2.6.32-22, without any problems, I assume you have checked out this post: http://ubuntuforums.org/showthread.p...t=wacom+bamboo Favux & Ayuthia are genius's when it comes to wacom. I hope you get it working, I can't imagine not having my wacom, it's one of the reasons I changed from Fedora to Ubuntu coz I could get it working.

  8. #18
    Join Date
    May 2010
    Beans
    1

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    I've tried these steps mentioned to get my Bamboo pen (newer edition) to work but im getting this error when i type the make command in the terminal. I am using the linuxwacom-0.8.6-2.tar.bz2 file.


    make: *** No targets specified and no makefile found. Stop.


    please shed some light on where im going wrong thanks for your patience
    Last edited by opensourcenoob; May 28th, 2010 at 06:22 AM. Reason: adding extra information

  9. #19
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Hi opensourcenoob,

    Welcome to Ubuntu forums!

    With 0.8.6-2 you no longer need the extra directory change 'cd src/2.6.30/'. The config for 0.8.6-2 was fixed so it is now aware when Xserver 1.7 is present, and it excludes the wacom X driver so only the wacom.ko is in the config.in and compiled.

    Hope this helps.

  10. #20
    Join Date
    Jun 2010
    Beans
    3

    Re: HOWTO Wacom bamboo CTL-460 in Lucid Lynx

    Hi people

    I have this weird problem. I'm using Ubuntu 10.04, and followed the relevant instructions to install version 0.8.6-1 of the linuxwacom driver, wacom.ko. To my delight, this made my Bamboo Pen&Touch work fairly well (except for some known issues). All well and good.

    However, yesterday I discovered that it wasn't working anymore: With the tablet, I can not move the cursor in X or draw in the Gimp, the buttons have no effect, no actions show up in "xev", and "xsetwacom list dev" prints nothing. Something is working, however, since "dmesg" prints this when I reconnect the tablet:

    [ 3646.973882] usb 2-5.1.2: new full speed USB device using ehci_hcd and address 8
    [ 3647.089543] usb 2-5.1.2: configuration #1 chosen from 1 choice
    [ 3647.093909] input: Wacom BambooFun 2FG 4x5 Pen as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1.2/2-5.1.2:1.0/input/input32
    [ 3647.099787] input: Wacom BambooFun 2FG 4x5 Finger as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5.1/2-5.1.2/2-5.1.2:1.1/input/input33
    It is attached the same way as always, and the LED on the tablet is showing off all its colors and intensities at the right times. The tablet is also working as before on my MacBook. In conclusion; this is not a hardware issue.

    I have tried recompiling and reinstalling several different versions of wacom.ko (0.8.6-1, 0.8.6-2 and 0.8.7-2) and rebooting, with no effect.

    I am pretty sure that I have the same kernel as before; 2.6.32-22.

    So... any ideas?

Page 2 of 5 FirstFirst 1234 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •