Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: MTS Mblaze(mobile broadband internet)

  1. #1
    Join Date
    Apr 2010
    Beans
    Hidden!

    MTS Mblaze(mobile broadband internet)

    Does MTS Mblaze(mobile broadband internet) work on lucid lynx ?? Someone please help ?

  2. #2
    Join Date
    Feb 2010
    Location
    White Plume Mountain
    Beans
    Hidden!
    Distro
    Ubuntu 14.04 Trusty Tahr

    Re: Lucid: changes for the sake of ... what?

    That was fast, they beat me to it. You should get better help here.
    Thank you for your contributions. "So long and thanks for the fish!"

  3. #3
    Join Date
    Jun 2007
    Location
    Porirua, New Zealand
    Beans
    Hidden!
    Distro
    Ubuntu

    Re: MTS Mblaze(mobile broadband internet)

    Moved to new thread
    Forum DOs and DON'Ts
    Never assume that information you find using a search engine is up-to-date.

  4. #4
    Join Date
    Sep 2007
    Location
    Pune, India
    Beans
    445
    Distro
    Kubuntu Development Release

    Re: MTS Mblaze(mobile broadband internet)

    @ubun2warrior: do you have the device already? or planning to buy? from the pictures it looks like one of the known working devices similar to reliance's ones so should work either out of the box or after installing the usb-modeswitch (and related usb-modeswitch-data) package...

    does google search not show up anything?
    Desktop: Unbranded, Q6600 2.4 ghz CPU, Intel DP35DP mobo, 4 GB RAM, 500 GB HDD, 128 GB SSD, NVIDIA 8800GT, Dell E248WFP LCD.
    Laptop: HP Pavilion tx1302au Turion64 X2 TL-58 1.9 ghz CPU, NVIDIA GeForce Go 6150, 2 GB RAM, 64 GB SSD, Broadcom 4321 Wifi.

  5. #5
    Join Date
    Apr 2010
    Beans
    Hidden!

    Re: MTS Mblaze(mobile broadband internet)

    The device is a ZTE one and Ubuntu is not able to recognize the device. I have tried wvdial, gnome ppp also, but nothing works. I don't know much command line . The device uses the following details: Username: internet@internet.mtsindia.in
    Password: MTS
    Phone: #777

    I have already purchased the modem so guide me with this one please

  6. #6
    Join Date
    Sep 2007
    Location
    Pune, India
    Beans
    445
    Distro
    Kubuntu Development Release

    Re: MTS Mblaze(mobile broadband internet)

    Can you post the output of "lsusb" both before and after pluggnig in the device?

    Also, does it "mount" a storage point with files in it? If so, you need to try the usb-modeswitch package or simply unmount it then run the modem setup (mobile broadband tab) via network manager...
    Desktop: Unbranded, Q6600 2.4 ghz CPU, Intel DP35DP mobo, 4 GB RAM, 500 GB HDD, 128 GB SSD, NVIDIA 8800GT, Dell E248WFP LCD.
    Laptop: HP Pavilion tx1302au Turion64 X2 TL-58 1.9 ghz CPU, NVIDIA GeForce Go 6150, 2 GB RAM, 64 GB SSD, Broadcom 4321 Wifi.

  7. #7
    Join Date
    Apr 2010
    Beans
    Hidden!

    Re: MTS Mblaze(mobile broadband internet)

    Hi

    This is the output of lsusb:
    Before Connecting
    Bus 002 Device 002: ID 1241:1503 Belkin Keyboard
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub


    After Connecting:
    Bus 002 Device 004: ID 19d2:fff1 ONDA Communication S.p.A.
    Bus 002 Device 002: ID 1241:1503 Belkin Keyboard
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

  8. #8
    Join Date
    Aug 2008
    Location
    Athens Greece
    Beans
    971
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: MTS Mblaze(mobile broadband internet)

    Hi ubun2warrior, please try the following procedure:

    >>> UPDATE your ubuntu using any other method (ethernet, wifi)

    - boot without modem, wait for the system to load
    - open a terminal window and try: sudo dmesg -c
    this will show all system activity till then and will 'clear' this log. Next dmesg (without -c) will show only 'new' activity
    - check kernel version (from terminal): uname -a
    - attach modem
    - wait 30-40 seconds
    - from terminal: dmesg
    - from terminal: lsusb
    - from terminal: ls /dev/ttyU*)

    Post output of above commands EXCEPT from first 'sudo dmesg -c' as this is huge and without data for your modem!

    Regards,
    George

  9. #9
    Join Date
    Apr 2010
    Beans
    Hidden!

    Re: MTS Mblaze(mobile broadband internet)

    Hi GeorgeVita

    These are the following outputs you asked for
    dmesg output:-

    [ 393.268023] usb 4-1: new full speed USB device using uhci_hcd and address 2
    [ 393.432529] usb 4-1: configuration #1 chosen from 1 choice
    [ 393.508828] Initializing USB Mass Storage driver...
    [ 393.509999] scsi2 : SCSI emulation for USB Mass Storage devices
    [ 393.510245] usb-storage: device found at 2
    [ 393.510248] usb-storage: waiting for device to settle before scanning
    [ 393.510260] usbcore: registered new interface driver usb-storage
    [ 393.510265] USB Mass Storage support registered.
    [ 393.694391] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71
    [ 393.695410] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71
    [ 393.696526] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd usb_modeswitch rqt 128 rq 6 len 255 ret -71
    [ 393.744076] usb 4-1: USB disconnect, address 2
    [ 395.224035] usb 4-1: new full speed USB device using uhci_hcd and address 3
    [ 395.370019] usb 4-1: config 1 has an invalid interface number: 5 but max is 4
    [ 395.370024] usb 4-1: config 1 has no interface number 4
    [ 395.388531] usb 4-1: configuration #1 chosen from 1 choice
    [ 395.429193] scsi3 : SCSI emulation for USB Mass Storage devices
    [ 395.431036] usb-storage: device found at 3
    [ 395.431040] usb-storage: waiting for device to settle before scanning
    [ 400.429192] usb-storage: device scan complete
    [ 400.432176] scsi 3:0:0:0: Direct-Access ZTE USB Storage FFF1 2.31 PQ: 0 ANSI: 2
    [ 400.439480] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 400.439583] sd 3:0:0:0: Attached scsi generic sg1 type 0

    lsusb output:-

    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 003: ID 19d2:fff1
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    ls /dev/ttyU* output:-
    ls: cannot access /dev/ttyU*: No such file or directory

    Regards

  10. #10
    Join Date
    Aug 2008
    Location
    Athens Greece
    Beans
    971
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: MTS Mblaze(mobile broadband internet)

    Quote Originally Posted by ubun2warrior View Post
    ...
    [ 395.429193] scsi3 : SCSI emulation for USB Mass Storage devices
    [ 395.431036] usb-storage: device found at 3
    [ 395.431040] usb-storage: waiting for device to settle before scanning
    [ 400.429192] usb-storage: device scan complete
    [ 400.432176] scsi 3:0:0:0: Direct-Access ZTE USB Storage FFF1 2.31 PQ: 0 ANSI: 2
    [ 400.439480] sd 3:0:0:0: [sdb] Attached SCSI removable disk
    [ 400.439583] sd 3:0:0:0: Attached scsi generic sg1 type 0
    Hi ubun2warrior,
    try again the procedure, check again the name of 'attached SCSI removable disk', above shown sdb. Eject it using the name that will appear (sdb or anything else):
    Code:
    sudo eject sdb
    Wait some seconds, try again dmesg and ls /dev/ttyU*

    Post any 'better' result.
    Also check the sticker on the modem's case to find the full model.

    Regards,
    George

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •