Hey Guys and Gals
UNR installation was ok on the little Medion E1222.
Wifi & Sentelic FingerSensingPad have been the only issues. Wifi is easy just do what it says here. (Must be connected to Internet(Use Ethernet Port))
http://ubuntuforums.org/showpost.php...65&postcount=2
Sentelic FingerSensingPad is a bit harder.
There was a bug filed here that has a module compiled you can modprobe in to your kernel.
https://bugs.launchpad.net/ubuntu/+s...ux/+bug/311869
This fix is included with the 2.6.32 kernel.
This post on MSIwind forum archive from March 27th by vern is brilliant to get the Finger Sensing Pad with basic function including not going crazy after suspend.
http://insanelywind.com/msiarchive/v...=4828&start=40
My FSP was /sys/devices/platform/i8042/serio2
So in the fsp_conf file pay attention to the line:
FSP_DEV_DIR="/sys/devices/platform/i8042/serio1"
then change it appropriately.
http://insanelywind.com/msiarchive/v...=4828&start=40
I found the my Finger Sensing Pad stopped working after reboot so what you need to do is edit /etc/default/grub.
Code:
sudo gedit /etc/default/grub
and change
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash"
to
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash i8042.reset=1"
Note: When installing UNR from USBStick if you ran it as a LiveCD then shut down booted from USBStick chose to "Install UNR" the Finger Sensing Pad doesn't work during install.
To resolve: add argument to boot line "i8042.reset=1"
I hope this makes sense to someone. I didn't have a lot of time so it's hashed together a bit. If people require I can try and more newbie friendly version.
Bookmarks