Page 39 of 50 FirstFirst ... 29373839404149 ... LastLast
Results 381 to 390 of 491

Thread: Lenovo Ideapad S10-3t

  1. #381
    Join Date
    Mar 2011
    Location
    Macomb, IL
    Beans
    1
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Lenovo Ideapad S10-3t

    ⎜ ↳ Cando Corporation Cando 10.1 Multi Touch Panel with Controller id=12 [slave pointer (2)]

    Edited the script to update the id and everything works fine now.

  2. #382
    Join Date
    Dec 2007
    Location
    New York, NY
    Beans
    92
    Distro
    Ubuntu 11.04 Natty Narwhal

    Re: Lenovo Ideapad S10-3t

    Woo working multi touch.

    http://code.google.com/p/touchegg/

  3. #383
    Join Date
    Mar 2011
    Beans
    3

    Re: Lenovo Ideapad S10-3t

    Got the basics working nicely, added in the rotate screen scripts associated with a easystroke gesture - very slick. Also have successfully printed with my HP OfficeJet 6300 -- but there is a huge delay between clicking "print" and when the document actually gets out to the printer - like 5 minutes. The printer is connected to the network via its own ethernet cable.

    System:
    - Ubuntu 10.10 remix
    - HP OfficeJet 6300 printer - same symptoms printing from Firefix, chrome, openoffice, Flash (within browser).

    I can live with this, just thought I would put this out there in case anyone else had a similar experience.

    regards,
    r.b.

  4. #384
    Join Date
    Mar 2008
    Beans
    323
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: Lenovo Ideapad S10-3t

    Hi, I am having problems with rotating the input with natty.
    If I run list-props for the screen, id 14 I get:
    Code:
    anthony@Anthony-Tablet:~$ xinput list-props 14
    Device 'Cando Corporation Cando 10.1 Multi Touch Panel with Controller':
    	Device Enabled (135):	1
    	Coordinate Transformation Matrix (137):	1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    	Device Accel Profile (267):	0
    	Device Accel Constant Deceleration (268):	1.000000
    	Device Accel Adaptive Deceleration (269):	1.000000
    	Device Accel Velocity Scaling (270):	10.000000
    	Evdev Axis Inversion (271):	0, 0
    	Evdev Axis Calibration (272):	<no items>
    	Evdev Axes Swap (273):	0
    However, the following command has no effect on the touchscreen input.
    Code:
    anthony@Anthony-Tablet:~$ xinput set-prop 14 "Evdev Axis Inversion" 1 1
    The change is being registered though:
    Code:
    anthony@Anthony-Tablet:~$ xinput list-props 14
    Device 'Cando Corporation Cando 10.1 Multi Touch Panel with Controller':
    	Device Enabled (135):	1
    	Coordinate Transformation Matrix (137):	1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    	Device Accel Profile (267):	0
    	Device Accel Constant Deceleration (268):	1.000000
    	Device Accel Adaptive Deceleration (269):	1.000000
    	Device Accel Velocity Scaling (270):	10.000000
    	Evdev Axis Inversion (271):	1, 1
    	Evdev Axis Calibration (272):	<no items>
    	Evdev Axes Swap (273):	0
    	...
    The following commands do work, however, to enable/disable the input:
    Code:
    anthony@Anthony-Tablet:~$ xinput set-prop 14 "Device Enabled" 0
    anthony@Anthony-Tablet:~$ xinput set-prop 14 "Device Enabled" 1
    So for some reason the input rotation is being ignored. Any help getting this working would be great.

    Thanks

    Anthony

  5. #385
    Join Date
    Oct 2010
    Beans
    12

    Re: Lenovo Ideapad S10-3t

    Hello,
    I was wondering if anybody got the side buttons above the mute working, or exactly what type of input they send. I would like the technical name so I can do more research.

  6. #386
    Join Date
    Apr 2011
    Beans
    1

    Re: Lenovo Ideapad S10-3t

    Quote Originally Posted by MadnessRed View Post
    Hi, I am having problems with rotating the input with natty.
    I can confirm this on another device with id=11. The only help I can give is a link to the bug report I filed:
    https://bugs.launchpad.net/ubuntu/+s...ev/+bug/749493

  7. #387
    Join Date
    Mar 2008
    Beans
    323
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: Lenovo Ideapad S10-3t

    Quote Originally Posted by Canadian_Pirate View Post
    Hello,
    I was wondering if anybody got the side buttons above the mute working, or exactly what type of input they send. I would like the technical name so I can do more research.
    They're mentioned in lsinput if that helps.

  8. #388
    Join Date
    Apr 2011
    Beans
    1

    Re: Lenovo Ideapad S10-3t

    Hi everyone,

    I'm new to the forum and to Ubuntu. I've bought an s10-3t and want to replace windows starter with ubuntu 10.10. I've been reading up on forums and am aware that the one key recovery won't work if the partitions are changed, so I guess OKR won't work after putting on ubuntu, but I have a question that hopefully someone here can answer for me...

    If I burn recovery cds/dvds using OKR program before installing Ubuntu, will they still work after installing it?

    Or can I install ubuntu without messing with partitions? I'd like to get rid of windows completely/don't want to dual boot.

    Like I say, I'm new to linux and want to have a way to get back to factory settings if I mess it up! Or if I want to sell the netbook in the future.

    Thanks,

  9. #389
    Join Date
    Mar 2008
    Beans
    323
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: Lenovo Ideapad S10-3t

    Quote Originally Posted by areyedancin View Post
    Hi everyone,

    I'm new to the forum and to Ubuntu. I've bought an s10-3t and want to replace windows starter with ubuntu 10.10. I've been reading up on forums and am aware that the one key recovery won't work if the partitions are changed, so I guess OKR won't work after putting on ubuntu, but I have a question that hopefully someone here can answer for me...

    If I burn recovery cds/dvds using OKR program before installing Ubuntu, will they still work after installing it?

    Or can I install ubuntu without messing with partitions? I'd like to get rid of windows completely/don't want to dual boot.

    Like I say, I'm new to linux and want to have a way to get back to factory settings if I mess it up! Or if I want to sell the netbook in the future.

    Thanks,
    The one key recovery works by creating the system at factory settings on a partition on your hard drive. If you remove this partition okr won't work.
    I think that grub, Ubuntu's boot manager can boot okr like it would with any other operating system so it should be ok to remove windows and install ubuntu, a long as you leave the okr partition intact.

    That said, if you are new to Ubuntu, unless you are short of space it may be worth dual booting windows. I have been using Ubuntu for about 4 years but I still keep a windows os in dual boot.

    If you create a recovery disk then you should be able to recover from that and then remove the recovery partition.

    Again this is all "should". I haven't experimented with it, my recovery partition is still intact and wasting space and I haven't burned any recovery cd's. It's probably worth contacting the manufacturers and asking if the recovery disks require the okr partition to be intact.

    tl;dr
    The safest thing to do is probably resize you windows partition to give yourself 40gb of space for Ubuntu or something like that. Leave the okr partition as it is. Creating a physical recovery disk is always a good idea.

  10. #390
    Join Date
    Mar 2008
    Beans
    323
    Distro
    Ubuntu 11.10 Oneiric Ocelot

    Re: Lenovo Ideapad S10-3t

    Quote Originally Posted by Silthanis View Post
    I can confirm this on another device with id=11. The only help I can give is a link to the bug report I filed:
    https://bugs.launchpad.net/ubuntu/+s...ev/+bug/749493
    Great, thanks, the bug report had a comment which helped, I have a solution, 1 sec while I code it.

    Edit1: Ok, I can rotate the output is is a matrix rotation so it is about the origin. As in the entire is being rotated round the top left corner. So if it goes from 0=>100% for normal mode, it goes from -100%=>0 for the inverted mode. It's progress though.

    Edit2: Since it is a 3d matrix and the z value appears constant is is possible to use that to create a linear translation Just need to find the right constants.

    Edit3: Success, I have a fully working rotation script on natty!!! I'll post in a sec
    Last edited by MadnessRed; April 15th, 2011 at 12:07 AM.

Page 39 of 50 FirstFirst ... 29373839404149 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •