Results 1 to 2 of 2

Thread: suppress kernel message of rtl8192_pci

  1. #1
    Join Date
    Jan 2010
    Beans
    11

    suppress kernel message of rtl8192_pci

    Hi everyone,

    I have just got my asus eeepc 1201n works on ubuntu 9.1. The wireless driver rthl8192_pci works well up to now. But there is a problem that it always flood many message in my kernel log (dmesg). Is there anyway to suppress / close the message output of rtl8192_pci? here is a sample output of the message I saw:

    Code:
    [  204.978056] ===>ieee80211_associate_procedure_wq(), chan:11
    [  204.978066] ==========>HTSetConnectBwMode():pHTInfo->bCurBW40MHz:0
    [  204.988061] =================>ieee80211_authentication_req():auth->algorithm is 0
    [  204.989971] ===>rtl8192_SetWirelessMode(), wireless_mode:0x6, support_mode:0x16
    [  204.989985] <===rtl8192_SetWirelessMode(), wireless_mode:4, bEnableHT = 0
    [  204.992426] #################ieee80211_sta_send_associnfo(), assocreq_ies_len:24,assocresp_ies_len:24
    [  204.993939] Associated successfully
    [  204.993955] ============>normal associate
    [  204.993988] Using G rates:108
    [  204.993994] Successfully associated, ht not enabled(0, 0)
    [  204.994029] ===========rtl8192se_update_ratr_table: ff5
    [  204.994036] ===>set to B/G mode
    [  205.007676] ===>u4bAcParam:731c, ===>u4bAcParam:731c, ===>u4bAcParam:731c, ===>u4bAcParam:731c, ===>DHCP Protocol start tx DHCP pkt src port:68, dest port:67!!
    [  255.746083] ===========rtl8192se_update_ratr_table: ff5
    [  255.746091] ===>set to B/G mode
    [  295.742086] ===========rtl8192se_update_ratr_table: ff5
    [  295.742094] ===>set to B/G mode
    [  355.754077] ===========rtl8192se_update_ratr_table: ff5
    [  355.754084] ===>set to B/G mode
    [  435.758041] ===========rtl8192se_update_ratr_table: ff5
    [  435.758048] ===>set to B/G mode
    [  535.750038] ===========rtl8192se_update_ratr_table: ff5
    [  535.750045] ===>set to B/G mode
    [  655.738083] ===========rtl8192se_update_ratr_table: ff5
    [  655.738090] ===>set to B/G mode
    [  775.754035] ===========rtl8192se_update_ratr_table: ff5
    [  775.754042] ===>set to B/G mode
    [  895.750129] ===========rtl8192se_update_ratr_table: ff5
    [  895.750137] ===>set to B/G mode
    [ 1015.750054] ===========rtl8192se_update_ratr_table: ff5
    [ 1015.750062] ===>set to B/G mode
    [ 1135.754030] ===========rtl8192se_update_ratr_table: ff5
    [ 1135.754037] ===>set to B/G mode
    I am running kernel 2.6.31-18-generic and install the driver by following the guide here:

    http://ubuntuforums.org/showthread.php?t=1354666&page=2

    Thank you very much.

    Best regards.
    WONG Hang.

  2. #2
    Join Date
    Apr 2008
    Location
    Arizona
    Beans
    398
    Distro
    Ubuntu

    Re: suppress kernel message of rtl8192_pci

    I have the 1201N and I installed the wifi drive on from this post
    http://vip.asus.com/forum/view.aspx?...e=en-us&page=3
    and I have not had the message
    maybe uninstall and reinstall with those directions?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •