I have been playing around with the operation of the wireless switches on the laptop. There are two of them FN+F2 on the keyboard, and the physical switch on the front of the laptop. I have been playing around with the /etc/acpi/ and /etc/acpi/event scripts and have found that deleting the scripts do not stop the function of the wireless switches.
Long story short where are the files that I would change to change the function of the wireless switches. Ultimately I would like to have FN+F2 turn on and off the wireless only (currently it does the wireless and bluetooth) and I would like the switch to turn off both the wireless and bluetooth (currently it does something different, not helpful, incorrect).
They give two ACPI signals so I thought that it would be in the ACPI events, those scripts didn't change the operation. I deleted them so I could try to find what makes the change. Couldn't find it.
Here are the ACPI Signals if you need to know.
5d, 7e off
5d, 7d on
5d, 7e off
5e, 7d on
Ultimately I would like to build some code that would send the info the libnotify. I can do that if I know where to change stuff.
I am comfortable changing driver files and can read code. I am not worried about losing the install. Just need help.
Wireless Card lspci info
07:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Subsystem: Intel Corporation Device 1100
Flags: bus master, fast devsel, latency 0, IRQ 32
Memory at fe9fe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Capabilities: [e0] Express Endpoint, MSI 00
Capabilities:  Advanced Error Reporting <?>
Capabilities:  Device Serial Number fb-52-6e-ff-ff-3b-1f-00
Kernel driver in use: iwlagn
Kernel modules: iwlagn
Thanks in Advance,