Results 1 to 2 of 2

Thread: 16 GiB SDHC not working

  1. #1
    Join Date
    Apr 2009
    Beans
    25
    Distro
    Ubuntu 10.04 Lucid Lynx

    16 GiB SDHC not working

    I've bought a new sdhc card for my camera.I've tried to plug.But it's not working.Also my 8gb sdhc memory is not working.

    That's the output of lsusb:
    Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 001 Device 035: ID 05e3:0711 Genesys Logic, Inc. Card Reader
    Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    dmesg:
    [ 2052.582436] usb-storage: device found at 37
    [ 2052.582443] usb-storage: waiting for device to settle before scanning
    [ 2057.580600] usb-storage: device scan complete
    [ 2057.696054] usb 1-2: reset high speed USB device using ehci_hcd and address 37
    [ 2057.834863] scsi 37:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
    [ 2057.836568] sd 37:0:0:0: Attached scsi generic sg2 type 0
    [ 2073.170209] usb 1-2: USB disconnect, address 37
    [ 2073.170611] sd 37:0:0:0: [sdb] READ CAPACITY failed
    [ 2073.170617] sd 37:0:0:0: [sdb] Result: hostbyte=DID_ERROR driverbyte=DRIVER_OK
    [ 2073.170626] sd 37:0:0:0: [sdb] Sense not available.
    [ 2073.170709] sd 37:0:0:0: [sdb] Write Protect is off
    [ 2073.170716] sd 37:0:0:0: [sdb] Mode Sense: 00 00 00 00
    [ 2073.170722] sd 37:0:0:0: [sdb] Assuming drive cache: write through
    [ 2073.170932] sd 37:0:0:0: [sdb] Attached SCSI removable disk
    [ 2091.036062] usb 1-2: new high speed USB device using ehci_hcd and address 38
    [ 2091.179904] usb 1-2: configuration #1 chosen from 1 choice
    [ 2091.214267] scsi38 : SCSI emulation for USB Mass Storage devices
    [ 2091.249181] usb-storage: device found at 38
    [ 2091.249188] usb-storage: waiting for device to settle before scanning
    [ 2096.248586] usb-storage: device scan complete
    [ 2096.249959] scsi 38:0:0:0: Direct-Access Generic STORAGE DEVICE 9144 PQ: 0 ANSI: 0
    [ 2096.252700] sd 38:0:0:0: Attached scsi generic sg2 type 0

  2. #2
    Join Date
    Dec 2009
    Beans
    2

    Re: 16 GiB SDHC not working

    I am having the same problem in Ubuntu 9.10.

    2GB SD card put into multi-card reader and plugged into USB port
    ----------------------------------------------------------------


    usb 1-5: new high speed USB device using ehci_hcd and address 44
    usb 1-5: configuration #1 chosen from 1 choice
    scsi47 : SCSI emulation for USB Mass Storage devices
    scsi 47:0:0:0: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
    scsi 47:0:0:1: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
    scsi 47:0:0:2: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
    scsi 47:0:0:3: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
    sd 47:0:0:0: Attached scsi generic sg2 type 0
    sd 47:0:0:1: Attached scsi generic sg3 type 0
    sd 47:0:0:2: Attached scsi generic sg4 type 0
    sd 47:0:0:3: Attached scsi generic sg5 type 0
    sd 47:0:0:1: [sdc] Attached SCSI removable disk
    sd 47:0:0:2: [sdd] 3962880 512-byte logical blocks: (2.02 GB/1.88 GiB)
    sd 47:0:0:0: [sdb] Attached SCSI removable disk
    sd 47:0:0:2: [sdd] Write Protect is off
    sd 47:0:0:3: [sde] Attached SCSI removable disk
    sdd: sdd1
    sd 47:0:0:2: [sdd] Attached SCSI removable disk

    works fine
    unmounted 2GB SD card
    unplugged card reader
    ---------------------


    usb 1-5: USB disconnect, address 44

    put in 8GB SD card and plugged back in
    --------------------------------------


    usb 1-5: new high speed USB device using ehci_hcd and address 45
    usb 1-5: configuration #1 chosen from 1 choice
    scsi48 : SCSI emulation for USB Mass Storage devices
    scsi 48:0:0:0: Direct-Access Generic STORAGE DEVICE 0125 PQ: 0 ANSI: 0
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    scsi 48:0:0:1: Device offlined - not ready after error recovery
    sd 48:0:0:0: Attached scsi generic sg2 type 0
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    usb 1-5: reset high speed USB device using ehci_hcd and address 45
    sd 48:0:0:0: Device offlined - not ready after error recovery
    sd 48:0:0:0: [sdb] READ CAPACITY failed
    sd 48:0:0:0: [sdb] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
    sd 48:0:0:0: [sdb] Sense not available.
    sd 48:0:0:0: [sdb] Write Protect is off
    sd 48:0:0:0: [sdb] Attached SCSI removable disk

    and there it stops

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •