Page 20 of 34 FirstFirst ... 10181920212230 ... LastLast
Results 191 to 200 of 340

Thread: Install Wizardpen driver for Iball tablet

  1. #191
    Join Date
    Jun 2006
    Beans
    3

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    Quote Originally Posted by Favux View Post
    Hi huit_six,

    Interesting. "AlwaysCore" and "SendCoreEvent" are obsolete with Lucid's Xserver 1.7. But that's the first time I've seen it cause a problem. You can just remove them, like you did.
    Hello Favux,
    Thank you for the information, so it could be a bug from the installer of the proprietary ATI driver ? I have to add that it's a fresh Lucid install.

    I think I will try to move the xorg.conf to see if the tablet works well, but I fear that my dual screen will not work.
    I'll see it when i'll be back home.

    @Robbyx : Don't have any solution but you could try to launch a lucid live cd and install the tablet to see if it works and if the problem comes from the fact that you upgraded rather than fresh installed.

  2. #192
    Join Date
    Jan 2007
    Beans
    35

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    I recently switched from ubuntu 9 to 10.04 by installing in a new partition. These install instructions worked fine on 9 and I am attempting to replicate the results on 10.

    However, after this line
    Code:
    ./configure --with-xorg-module-dir=/usr/lib/xorg/modules
            make && sudo make install
    It produces the following errors at the bottom of the output.
    I simply don't know where to go from here. I've googled the errors only to find people not experiencing the same thing.

    Any help would be sincerely appreciated.

    Code:
    eliot@blackLaptop:~/Desktop/wizardpen-0.7.0-alpha2$ sudo vim /etc/hal/fdi/policy/99-x11-wizardpen.fdi
    sudo: vim: command not found
    eliot@blackLaptop:~/Desktop/wizardpen-0.7.0-alpha2$ sudo gedit /etc/hal/fdi/policy/99-x11-wizardpen.fdi
    eliot@blackLaptop:~/Desktop/wizardpen-0.7.0-alpha2$ gksudo gedit  /etc/hal/fdi/policy/99-x11-wizardpen.fdi
    eliot@blackLaptop:~/Desktop/wizardpen-0.7.0-alpha2$ cd
    eliot@blackLaptop:~$ sudo aptitude install xutils libx11-dev libxext-dev build-essential \
    >             xautomation xinput xserver-xorg-dev
    Reading package lists... Done
    Building dependency tree       
    Reading state information... Done
    Reading extended state information      
    Initializing package states... Done
    Writing extended state information... Done
    No packages will be installed, upgraded, or removed.
    0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
    Need to get 0B of archives. After unpacking 0B will be used.
    Writing extended state information... Done
    Reading package lists... Done             
    Building dependency tree       
    Reading state information... Done
    Reading extended state information      
    Initializing package states... Done
    
    eliot@blackLaptop:~$ cd Desktop
    eliot@blackLaptop:~/Desktop$ cd wizardpen-0.7.0-alpha2
    eliot@blackLaptop:~/Desktop/wizardpen-0.7.0-alpha2$ ./configure --with-xorg-module-dir=/usr/lib/xorg/modules
    checking for a BSD-compatible install... /usr/bin/install -c
    checking whether build environment is sane... 
    yes
    checking for a thread-safe mkdir -p... /bin/mkdir -p
    checking for gawk... gawk
    checking whether make sets $(MAKE)... yes
    checking whether to enable maintainer-specific portions of Makefiles... no
    checking build system type... i686-pc-linux-gnu
    checking host system type... i686-pc-linux-gnu
    checking for style of include used by make... GNU
    checking for gcc... gcc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables... 
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking dependency style of gcc... gcc3
    checking for a sed that does not truncate output... /bin/sed
    checking for grep that handles long lines and -e... /bin/grep
    checking for egrep... /bin/grep -E
    checking for ld used by gcc... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking for /usr/bin/ld option to reload object files... -r
    checking for BSD-compatible nm... /usr/bin/nm -B
    checking whether ln -s works... yes
    checking how to recognise dependent libraries... pass_all
    checking how to run the C preprocessor... gcc -E
    checking for ANSI C header files... yes
    checking for sys/types.h... yes
    checking for sys/stat.h... yes
    checking for stdlib.h... yes
    checking for string.h... yes
    checking for memory.h... yes
    checking for strings.h... yes
    checking for inttypes.h... yes
    checking for stdint.h... yes
    checking for unistd.h... yes
    checking dlfcn.h usability... yes
    checking dlfcn.h presence... yes
    checking for dlfcn.h... yes
    checking for g++... g++
    checking whether we are using the GNU C++ compiler... yes
    checking whether g++ accepts -g... yes
    checking dependency style of g++... gcc3
    checking how to run the C++ preprocessor... g++ -E
    checking for g77... no
    checking for xlf... no
    checking for f77... no
    checking for frt... no
    checking for pgf77... no
    checking for cf77... no
    checking for fort77... no
    checking for fl32... no
    checking for af77... no
    checking for xlf90... no
    checking for f90... no
    checking for pgf90... no
    checking for pghpf... no
    checking for epcf90... no
    checking for gfortran... no
    checking for g95... no
    checking for xlf95... no
    checking for f95... no
    checking for fort... no
    checking for ifort... no
    checking for ifc... no
    checking for efc... no
    checking for pgf95... no
    checking for lf95... no
    checking for ftn... no
    checking whether we are using the GNU Fortran 77 compiler... no
    checking whether  accepts -g... no
    checking the maximum length of command line arguments... 32768
    checking command to parse /usr/bin/nm -B output from gcc object... ok
    checking for objdir... .libs
    checking for ar... ar
    checking for ranlib... ranlib
    checking for strip... strip
    checking if gcc supports -fno-rtti -fno-exceptions... no
    checking for gcc option to produce PIC... -fPIC
    checking if gcc PIC flag -fPIC works... yes
    checking if gcc static flag -static works... yes
    checking if gcc supports -c -o file.o... yes
    checking whether the gcc linker (/usr/bin/ld) supports shared libraries... yes
    checking whether -lc should be explicitly linked in... no
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    checking whether stripping libraries is possible... yes
    checking if libtool supports shared libraries... yes
    checking whether to build shared libraries... yes
    checking whether to build static libraries... no
    configure: creating libtool
    appending configuration tag "CXX" to libtool
    checking for ld used by g++... /usr/bin/ld
    checking if the linker (/usr/bin/ld) is GNU ld... yes
    checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
    checking for g++ option to produce PIC... -fPIC
    checking if g++ PIC flag -fPIC works... yes
    checking if g++ static flag -static works... yes
    checking if g++ supports -c -o file.o... yes
    checking whether the g++ linker (/usr/bin/ld) supports shared libraries... yes
    checking dynamic linker characteristics... GNU/Linux ld.so
    checking how to hardcode library paths into programs... immediate
    appending configuration tag "F77" to libtool
    checking for gcc... (cached) gcc
    checking whether we are using the GNU C compiler... (cached) yes
    checking whether gcc accepts -g... (cached) yes
    checking for gcc option to accept ISO C89... (cached) none needed
    checking dependency style of gcc... (cached) gcc3
    checking if RANDR is defined... yes
    checking if XINPUT is defined... no
    checking for pkg-config... /usr/bin/pkg-config
    checking pkg-config is at least version 0.9.0... yes
    checking for XORG... yes
    checking for ANSI C header files... (cached) yes
    checking linux/input.h usability... yes
    checking linux/input.h presence... yes
    checking for linux/input.h... yes
    checking sysfs/libsysfs.h usability... no
    checking sysfs/libsysfs.h presence... no
    checking for sysfs/libsysfs.h... no
    configure: creating ./config.status
    config.status: creating Makefile
    config.status: creating src/Makefile
    config.status: creating man/Makefile
    config.status: creating config.h
    config.status: config.h is unchanged
    config.status: executing depfiles commands
    eliot@blackLaptop:~/Desktop/wizardpen-0.7.0-alpha2$         make && sudo make install
    make  all-recursive
    make[1]: Entering directory `/home/eliot/Desktop/wizardpen-0.7.0-alpha2'
    Making all in src
    make[2]: Entering directory `/home/eliot/Desktop/wizardpen-0.7.0-alpha2/src'
    /bin/bash ../libtool --tag=CC   --mode=compile gcc -DHAVE_CONFIG_H -I. -I..     -g -O2 -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1    -I../src -MT wizardpen.lo -MD -MP -MF .deps/wizardpen.Tpo -c -o wizardpen.lo wizardpen.c
     gcc -DHAVE_CONFIG_H -I. -I.. -g -O2 -fvisibility=hidden -I/usr/include/xorg -I/usr/include/pixman-1 -I../src -MT wizardpen.lo -MD -MP -MF .deps/wizardpen.Tpo -c wizardpen.c  -fPIC -DPIC -o .libs/wizardpen.o
    wizardpen.c: In function 'DeviceInit':
    wizardpen.c:636: warning: passing argument 3 of 'InitButtonClassDeviceStruct' from incompatible pointer type
    /usr/include/xorg/input.h:290: note: expected 'Atom *' but argument is of type 'unsigned char *'
    wizardpen.c:636: error: too few arguments to function 'InitButtonClassDeviceStruct'
    wizardpen.c:662: warning: passing argument 3 of 'InitValuatorClassDeviceStruct' makes pointer from integer without a cast
    /usr/include/xorg/input.h:296: note: expected 'Atom *' but argument is of type 'unsigned int'
    wizardpen.c:662: error: too few arguments to function 'InitValuatorClassDeviceStruct'
    wizardpen.c:677: error: too few arguments to function 'InitValuatorAxisStruct'
    wizardpen.c:685: error: too few arguments to function 'InitValuatorAxisStruct'
    wizardpen.c:693: error: too few arguments to function 'InitValuatorAxisStruct'
    make[2]: *** [wizardpen.lo] Error 1
    make[2]: Leaving directory `/home/eliot/Desktop/wizardpen-0.7.0-alpha2/src'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/home/eliot/Desktop/wizardpen-0.7.0-alpha2'
    make: *** [all] Error 2

  3. #193
    Join Date
    Jan 2007
    Beans
    35

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    I notice there is a package called xserver-xorg-input-wizardpen in the synaptic package manager. Should I be using that instead of this guide?

  4. #194
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    Hi enixon,

    For Lucid (10.4) you want to use the xserver-xorg-input-wizardpen - 0.7.3-1ubuntu1 driver at: https://launchpad.net/~doctormo/+arc...dpen/+packages

  5. #195
    Join Date
    Jan 2007
    Beans
    35

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    Should I be downloading the deb file from that link and using the deb installer, or downloading the file and using the directions on this forum with the new version instead of the old? Or maybe just use synaptic package manager? I've done all three and none seem to work. Is this common, It must be some thing stupid I'm doing. Thanks for your time.

  6. #196
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    The deb should be fine.

    Maybe you're not matching in the 70-wizardpen.conf in /usr/lib/X11/xorg.conf.d/.

  7. #197
    Join Date
    Jan 2007
    Beans
    35

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    OK I found it, this is what it says. What is supposed to match within this file to what?
    Section "InputClass"
    Identifier "wizardpen"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/event*"
    MatchVendor "UC-LOGIC|KYE Systems|Ace Cad"
    Driver "wizardpen"
    EndSection
    Section "InputClass"
    Identifier "wizardpen ignore mouse dev"
    MatchIsTablet "on"
    MatchDevicePath "/dev/input/mouse*"
    MatchVendor "UC-LOGIC|KYE Systems|Ace Cad"
    Driver ""
    EndSection
    Last edited by enixon; June 28th, 2010 at 07:01 PM.

  8. #198
    Join Date
    Jun 2010
    Beans
    12

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    Hi,

    I'm trying to get a Trust TB-6300 (internal "UC-LOGIC Tablet WP8060U") to run on Debian Squeeze and one of my problems is that all instructions I found are for some Ubuntu version rather than for some xorg/udev/whatever version.

    /var/log/Xorg.0.log says:
    Code:
    (II) config/udev: Adding input device "UC-LOGIC Tablet WP8060U" (/dev/input/event3)
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
        compiled for 1.7.3.902, module version = 0.10.3
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 7.0
    (**) Option "Device" "/dev/input/event3"
    (II) "UC-LOGIC Tablet WP8060U": type not specified, assuming 'stylus'.
    (II) "UC-LOGIC Tablet WP8060U": other types will be automatically added.
    (**) "UC-LOGIC Tablet WP8060U": always reports core events
    (II) "UC-LOGIC Tablet WP8060U": hotplugging dependent devices.
    (II) "UC-LOGIC Tablet WP8060U": hotplugging completed.
    (II) XINPUT: Adding extended input device ""UC-LOGIC Tablet WP8060U"" (type: STYLUS)
    (--) "UC-LOGIC Tablet WP8060U": using pressure threshold of 61 for button 1
    (--) "UC-LOGIC Tablet WP8060U": Wacom Unknown USB tablet speed=38400 maxX=16000 maxY=12000 maxZ=1023 resX=1016 resY=1016  tilt=enabled
    (--) "UC-LOGIC Tablet WP8060U": top X=0 top Y=0 bottom X=16000 bottom Y=12000 resol X=1016 resol Y=1016
    This is strange for two reasons: it uses the driver "wacom" while it should use "wizardpen". And it does not configure /dev/input/mouse1 as a mouse (which I think it should). As far as I understand it, the driver should (in my case still) be determined by /lib/udev/rules.d/67-xorg-wizardpen.rules which reads:
    Code:
    # to configure the active area, pressure sensitivity and other settings see
    # /etc/udev/rules.d/70-xorg-wizardpen-settings.rules
    
    ACTION!="add|change", GOTO="xorg_wizardpen_end"
    SUBSYSTEM!="input", GOTO="xorg_wizardpen_end"
    
    # KYE Systems Corp Wide Screen Design Tablet TB-7300
    ENV{ID_VENDOR_ID}=="0458",  ENV{ID_MODEL_ID}=="5003", ENV{x11_driver}="wizardpen"
    # KYE Systems Corp Wide Screen Design Tablet TB-7300
    ENV{ID_VENDOR_ID}=="0458",  ENV{ID_MODEL_ID}=="5004", ENV{x11_driver}="wizardpen"
    # AceCad Corp Flair II GT-504
    ENV{ID_VENDOR_ID}=="0460",  ENV{ID_MODEL_ID}=="0004", ENV{x11_driver}="wizardpen"
    
    # UC-Logic Technology Corp
    # SuperPen WP3325U Tablet
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="0002", ENV{x11_driver}="wizardpen"
    # WP4030, Genius MousePen 4x3 Tablet/Aquila L1 Tablet
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="0003", ENV{x11_driver}="wizardpen"
    # WP5540, Genius MousePen 5x4 Tablet
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="0004", ENV{x11_driver}="wizardpen"
    # WP8060, Genius MousePen 8x6 Tablet, Trust TB-6300
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="0005", ENV{x11_driver}="wizardpen"
    # Genius PenSketch 6x8 Tablet
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="0041", ENV{x11_driver}="wizardpen"
    # Genius PenSketch 12x9 Tablet
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="0042", ENV{x11_driver}="wizardpen"
    # Digital Organizer (may not exist)
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="6000", ENV{x11_driver}="wizardpen"
    # Genius G-Note 5000
    ENV{ID_VENDOR_ID}=="5543", ENV{ID_MODEL_ID}=="6001", ENV{x11_driver}="wizardpen"
    
    # disable the /dev/input/mouseX device
    ENV{x11_driver}=="wizardpen", KERNEL=="mouse*", ENV{x11_driver}=""
    
    # Specify this device as a tablet to the xorg config
    ENV{x11_driver}=="wizardpen", KERNEL=="event*", ENV{ID_INPUT.tags}="wizardpen"
    ENV{x11_driver}=="wizardpen", KERNEL=="event*", ENV{ID_INPUT_TABLET}="1"
    
    LABEL="xorg_wizardpen_end"
    Indeed lsusb gives:
    Code:
    Bus 001 Device 007: ID 5543:0005 UC-Logic Technology Corp. Genius MousePen 8x6 Tablet
    What am I missing? Thanks in advance for any help!
    Stefan

  9. #199
    Join Date
    Jun 2010
    Beans
    12

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    Ok, now I upgraded xorg and it seems to notice the file

    /usr/share/X11/xorg.conf.d/70-wizardpen.conf

    I am now in the state that is already richly documented: cursor stays in the upper left corner. Is it correct that this has not yet been resolved?

    Edit: setting MaxX etc. in /etc/X11/xorg.conf worked.
    Last edited by switzel; June 30th, 2010 at 06:57 PM.

  10. #200
    Join Date
    Jan 2007
    Beans
    35

    Re: HOWTO INSTALL WIZARDPEN DRIVER FOR iball TABLET

    I ended up reinstalling ubuntu 9. I simply couldn't live without a tablet. Thanks any way for your help.
    Last edited by enixon; July 3rd, 2010 at 10:30 PM.

Page 20 of 34 FirstFirst ... 10181920212230 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •