My IBM T41 Laptop gives the following output:
wodim blank=all gives this output:Code:Checking session consistency (brasero_burn_check_session_consistency brasero-burn.c:1848) BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_set_output_size_for_current_track BraseroBurnURI stopping BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_session_output_size BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_BMR82U.bin toc = none BraseroBurnURI called brasero_job_get_action BraseroBurnURI called brasero_job_get_current_track BraseroBurnURI no burn:// URI found BraseroBurnURI stopping BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_set_output_size_for_current_track BraseroLocalTrack stopping BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_session_output_size BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_G4S82U.bin toc = none BraseroLocalTrack called brasero_job_get_action BraseroLocalTrack called brasero_job_get_current_track BraseroLocalTrack no remote URIs BraseroLocalTrack stopping BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_flags BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage called brasero_job_get_fd_in BraseroChecksumImage called brasero_job_set_output_size_for_current_track BraseroChecksumImage stopping BraseroChecksumImage called brasero_job_get_current_track BraseroChecksumImage called brasero_job_get_action BraseroChecksumImage There is a checksum already 0 BraseroWodim called brasero_job_get_action BraseroWodim getting varg BraseroWodim called brasero_job_get_action BraseroWodim called brasero_job_get_device BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_flags BraseroWodim called brasero_job_get_media BraseroWodim called brasero_job_set_current_action BraseroWodim got varg: wodim -v dev=/dev/sr0 blank=fast BraseroWodim Launching command BraseroWodim called brasero_job_get_fd_out BraseroWodim stderr: wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: devname: '/dev/sr0' BraseroWodim called brasero_job_get_flags BraseroWodim stderr: scsibus: -2 target: -2 lun: -2 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Linux sg driver version: 3.5.27 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Wodim version: 1.1.9 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: SCSI buffer size: 64512 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device BraseroWodim called brasero_job_get_flags BraseroWodim stderr: communication breaks or freezes immediately after that. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: TOC Type: 1 = CD-ROM BraseroWodim stdout: Device type : Removable CD-ROM BraseroWodim stdout: Version : 5 BraseroWodim stdout: Response Format: 2 BraseroWodim stdout: Capabilities : BraseroWodim stdout: Vendor_info : 'MATSHITA' BraseroWodim stdout: Identification : 'UJDA755zDVD/CDRW' BraseroWodim stdout: Revision : '1.20' BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-ROM. BraseroWodim stdout: Current: 0x000A (CD-RW) BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) BraseroWodim stdout: Profile: 0x000A (CD-RW) (current) BraseroWodim stdout: Profile: 0x0009 (CD-R) BraseroWodim stdout: Profile: 0x0008 (CD-ROM) BraseroWodim stdout: Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr). BraseroWodim stdout: Driver flags : MMC-3 SWABAUDIO BURNFREE BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R96R BraseroWodim stdout: Drive buf size : 1433600 = 1400 KB BraseroWodim stderr: Speed set to 1411 KB/s BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Current Secsize: 2048 BraseroWodim stdout: ATIP info from disk: BraseroWodim stdout: Indicated writing power: 3 BraseroWodim stdout: Reference speed: 6 BraseroWodim stdout: Is not unrestricted BraseroWodim stdout: Is erasable BraseroWodim stdout: Disk sub type: High speed Rewritable (CAV) media (1) BraseroWodim stdout: ATIP start of lead in: -11745 (97:25/30) BraseroWodim stdout: ATIP start of lead out: 359848 (79:59/73) BraseroWodim stdout: 1T speed low: 4 1T speed high: 10 BraseroWodim stdout: 2T speed low: 4 2T speed high: 0 (reserved val 6) BraseroWodim stdout: power mult factor: 1 5 BraseroWodim stdout: recommended erase/write power: 5 BraseroWodim stdout: A1 values: 24 1A D8 BraseroWodim stdout: A2 values: 26 B2 4A BraseroWodim stdout: Disk type: Phase change BraseroWodim stdout: Manuf. index: 40 BraseroWodim stdout: Manufacturer: INFODISC Technology Co., Ltd. BraseroWodim stdout: Starting to write CD/DVD at speed 8.0 in real BLANK mode for single session. BraseroWodim stdout: Last chance to quit, starting real write in 4 seconds. BraseroWodim called brasero_job_set_dangerous BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 3 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 2 seconds. BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: BraseroWodim stdout: 1 seconds. BraseroWodim stdout: 0 seconds. Operation starts. BraseroWodim stdout: Performing OPC... BraseroWodim stderr: wodim: OPC failed. BraseroWodim called brasero_job_get_flags BraseroWodim stdout: Blanking PMA, TOC, pregap BraseroWodim stderr: Errno: 5 (Input/output error), blank unit scsi sendcmd: no error BraseroWodim called brasero_job_get_flags BraseroWodim stderr: CDB: A1 01 00 00 00 00 00 00 00 00 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stdout: HUP BraseroWodim stderr: status: 0x2 (CHECK CONDITION) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Bytes: 70 00 03 00 00 00 00 0A 00 00 00 00 73 03 00 00 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Key: 0x3 Medium Error, Segment 0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 BraseroWodim called brasero_job_get_flags BraseroWodim stderr: Sense flags: Blk 0 (not valid) BraseroWodim called brasero_job_get_flags BraseroWodim stderr: cmd finished after 2.144s timeout 9600s BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Cannot blank disk, aborting. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Some drives do not support all blank types. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: wodim: Try again with wodim blank=all. BraseroWodim called brasero_job_get_flags BraseroWodim stderr: HUP BraseroWodim process finished with status 255 BraseroWodim called brasero_job_error BraseroWodim finished with an error BraseroWodim asked to stop because of an error error = 0 message = "no message" BraseroWodim stopping BraseroWodim got killed Session error : unknown (brasero_burn_record brasero-burn.c:2811)
and wodim --devices AND wodim -scanbus gives:Code:Device was not specified. Trying to find an appropriate drive... Detected CD-R drive: /dev/cdrw Using /dev/cdrom of unknown capabilities Error trying to open /dev/cdrom exclusively (Device or resource busy)... retrying in 1 second. Error trying to open /dev/cdrom exclusively (Device or resource busy)... retrying in 1 second. Error trying to open /dev/cdrom exclusively (Device or resource busy)... retrying in 1 second. Error trying to open /dev/cdrom exclusively (Device or resource busy)... retrying in 1 second. Error trying to open /dev/cdrom exclusively (Device or resource busy)... giving up. wodim: No such file or directory. Cannot open SCSI driver! For possible targets try 'wodim --devices' or 'wodim -scanbus'. For possible transport specifiers try 'wodim dev=help'. For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from the wodim documentation.
Code:wodim: No such file or directory. Cannot open SCSI driver! For possible targets try 'wodim --devices' or 'wodim -scanbus'. For possible transport specifiers try 'wodim dev=help'. For IDE/ATAPI devices configuration, see the file README.ATAPI.setup from the wodim documentation.
Adv Reply
Originally Posted by philinux
Bookmarks