Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: agpgart-intel
Kernel modules: intel-agp
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at 90000000 (64-bit, non-prefetchable) [size=4M]
Memory at 80000000 (64-bit, prefetchable) [size=256M]
I/O ports at 4110 [size=8]
Capabilities: <access denied>
Kernel driver in use: i915
Kernel modules: i915
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: fast devsel
Memory at 94500000 (64-bit, non-prefetchable) [disabled] [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 40e0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 21
I/O ports at 40c0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1a.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 19
Memory at 94405c00 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, fast devsel, latency 0, IRQ 22
Memory at 94400000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: 93400000-943fffff
Prefetchable memory behind bridge: 0000000090400000-00000000913fffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: 92400000-933fffff
Prefetchable memory behind bridge: 0000000091400000-00000000923fffff
Capabilities: <access denied>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 23
I/O ports at 40a0 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 19
I/O ports at 4080 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.2 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 16
I/O ports at 4060 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.3 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 18
I/O ports at 4040 [size=32]
Capabilities: <access denied>
Kernel driver in use: uhci_hcd
00:1d.7 USB Controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03) (prog-if 20)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at 94405800 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci_hcd
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93) (prog-if 01)
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel modules: iTCO_wdt
00:1f.2 SATA controller: Intel Corporation ICH9M/M-E SATA AHCI Controller (rev 03) (prog-if 01)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 26
I/O ports at 4108 [size=8]
I/O ports at 411c [size=4]
I/O ports at 4100 [size=8]
I/O ports at 4118 [size=4]
I/O ports at 4020 [size=32]
Memory at 94405000 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
Kernel driver in use: ahci
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: medium devsel, IRQ 11
Memory at 94406000 (64-bit, non-prefetchable) [size=256]
I/O ports at 4000 [size=32]
Kernel modules: i2c-i801
00:1f.6 Signal processing controller: Intel Corporation 82801I (ICH9 Family) Thermal Subsystem (rev 03)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: fast devsel, IRQ 11
Memory at 94404000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
01:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
Subsystem: Acer Incorporated [ALI] Device 022b
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at 93400000 (64-bit, non-prefetchable) [size=256K]
I/O ports at 3000 [size=128]
Capabilities: <access denied>
Kernel driver in use: atl1c
Kernel modules: atl1c
02:00.0 Network controller: Atheros Communications Inc. AR928X Wireless Network Adapter (PCI-Express) (rev 01)
Subsystem: Device 1a32:0303
Flags: bus master, fast devsel, latency 0, IRQ 17
Memory at 92400000 (64-bit, non-prefetchable) [size=64K]
Capabilities: <access denied>
Kernel driver in use: ath9k
Kernel modules: ath9k
Another problem is built in microphone. I can't hear myself after recording myself. I've tryed to unmute all the channels in alsamixer but nothing helped :S
Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.31-14-generic (buildd@rothera) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu8) ) #48-Ubuntu SMP Fri Oct 16 14:04:26 UTC 2009 (Ubuntu 2.6.31-14.48-generic)
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] NSC Geode by NSC
[ 0.000000] Cyrix CyrixInstead
[ 0.000000] Centaur CentaurHauls
[ 0.000000] Transmeta GenuineTMx86
[ 0.000000] Transmeta TransmetaCPU
[ 0.000000] UMC UMC UMC UMC
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007b9f0000 (usable)
[ 0.000000] BIOS-e820: 000000007b9f0000 - 000000007ba3f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ba3f000 - 000000007ba57000 (usable)
[ 0.000000] BIOS-e820: 000000007ba57000 - 000000007babf000 (reserved)
[ 0.000000] BIOS-e820: 000000007babf000 - 000000007bade000 (usable)
[ 0.000000] BIOS-e820: 000000007bade000 - 000000007baf7000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007baf7000 - 000000007bb00000 (usable)
[ 0.000000] BIOS-e820: 000000007bb00000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] DMI 2.6 present.
[ 0.000000] last_pfn = 0x7bb00 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-FFFFF write-through
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FC0000000 write-back
[ 0.000000] 1 base 0FFE00000 mask FFFE00000 write-protect
[ 0.000000] 2 base 040000000 mask FC0000000 write-back
[ 0.000000] 3 base 07C000000 mask FFC000000 uncachable
[ 0.000000] 4 base 07BC00000 mask FFFC00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 0000000000002000 - 0000000000006000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000006000 (reserved)
[ 0.000000] modified: 0000000000006000 - 000000000009e000 (usable)
[ 0.000000] modified: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 000000007b9f0000 (usable)
[ 0.000000] modified: 000000007b9f0000 - 000000007ba3f000 (ACPI NVS)
[ 0.000000] modified: 000000007ba3f000 - 000000007ba57000 (usable)
[ 0.000000] modified: 000000007ba57000 - 000000007babf000 (reserved)
[ 0.000000] modified: 000000007babf000 - 000000007bade000 (usable)
[ 0.000000] modified: 000000007bade000 - 000000007baf7000 (ACPI data)
[ 0.000000] modified: 000000007baf7000 - 000000007bb00000 (usable)
[ 0.000000] modified: 000000007bb00000 - 0000000080000000 (reserved)
[ 0.000000] modified: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fed10000 - 00000000fed14000 (reserved)
[ 0.000000] modified: 00000000fed18000 - 00000000fed1a000 (reserved)
[ 0.000000] modified: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffe00000 - 0000000100000000 (reserved)
[ 0.000000] initial memory mapped : 0 - 00c00000
[ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
[ 0.000000] Using x86 segment limits to approximate NX protection
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 0037400000 page 2M
[ 0.000000] 0037400000 - 00377fe000 page 4k
[ 0.000000] kernel direct mapping tables up to 377fe000 @ 7000-c000
[ 0.000000] RAMDISK: 378a6000 - 37fef91b
[ 0.000000] Allocated new RAMDISK: 008ad000 - 00ff691b
[ 0.000000] Move RAMDISK from 00000000378a6000 - 0000000037fef91a to 008ad000 - 00ff691a
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 7baf6120 0007C (v01 ACRSYS ACRPRDCT 00000001 01000013)
[ 0.000000] ACPI: FACP 7baf4000 000F4 (v04 ACRSYS ACRPRDCT 00000001 1025 000F4240)
[ 0.000000] ACPI: DSDT 7bae5000 0A592 (v01 ACER ACER 00000001 1025 20051117)
[ 0.000000] ACPI: FACS 7b9fd000 00040
[ 0.000000] ACPI: DMAR 7baf5000 00060 (v01 00000001 00000000)
[ 0.000000] ACPI: HPET 7baf3000 00038 (v01 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: APIC 7baf2000 0006C (v02 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: MCFG 7baf1000 0003C (v01 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: ASF! 7baf0000 000A5 (v32 ACER ACER 00000001 1025 000F4240)
[ 0.000000] ACPI: SLIC 7bae4000 00176 (v01 ACRSYS ACRPRDCT 00000001 1025 000F4240)
[ 0.000000] ACPI: BOOT 7bae3000 00028 (v01 ACER ACER 00000001 1025 00000001)
[ 0.000000] ACPI: SSDT 7bae2000 0031A (v01 ACER ACER 00001000 1025 20051117)
[ 0.000000] ACPI: SSDT 7badf000 00537 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.000000] ACPI: SSDT 7bade000 00655 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 1091MB HIGHMEM available.
[ 0.000000] 887MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 377fe000
[ 0.000000] low ram: 0 - 377fe000
[ 0.000000] node 0 low ram: 00000000 - 377fe000
[ 0.000000] node 0 bootmap 00008000 - 0000ef00
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00008a80a0] TEXT DATA BSS ==> [0000100000 - 00008a80a0]
[ 0.000000] #4 [000009e000 - 0000100000] BIOS reserved ==> [000009e000 - 0000100000]
[ 0.000000] #5 [00008a9000 - 00008ac258] BRK ==> [00008a9000 - 00008ac258]
[ 0.000000] #6 [0000007000 - 0000008000] PGTABLE ==> [0000007000 - 0000008000]
[ 0.000000] #7 [00008ad000 - 0000ff691b] NEW RAMDISK ==> [00008ad000 - 0000ff691b]
[ 0.000000] #8 [0000008000 - 000000f000] BOOTMAP ==> [0000008000 - 000000f000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x000377fe
[ 0.000000] HighMem 0x000377fe -> 0x0007bb00
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[6] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x00000002
[ 0.000000] 0: 0x00000006 -> 0x0000009e
[ 0.000000] 0: 0x00000100 -> 0x0007b9f0
[ 0.000000] 0: 0x0007ba3f -> 0x0007ba57
[ 0.000000] 0: 0x0007babf -> 0x0007bade
[ 0.000000] 0: 0x0007baf7 -> 0x0007bb00
[ 0.000000] On node 0 totalpages: 506314
[ 0.000000] free_area_init_node: node 0, pgdat c0784900, node_mem_map c1000000
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3962 pages, LIFO batch:0
[ 0.000000] Normal zone: 1744 pages used for memmap
[ 0.000000] Normal zone: 221486 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2183 pages used for memmap
[ 0.000000] HighMem zone: 276907 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000006000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:78000000)
[ 0.000000] NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages at c1f82000, static data 35612 bytes
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 502355
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.31-14-generic root=UUID=a808f8e3-9fca-4328-ac37-bae2d9ed0268 ro quiet splash
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] allocated 10132480 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (000377fe:0007bb00)
[ 0.000000] Memory: 1982164k/2026496k available (4565k kernel code, 42148k reserved, 2143k data, 540k init, 1116360k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff1d000 - 0xfffff000 ( 904 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
[ 0.000000] .init : 0xc078e000 - 0xc0815000 ( 540 kB)
[ 0.000000] .data : 0xc0575554 - 0xc078d308 (2143 kB)
[ 0.000000] .text : 0xc0100000 - 0xc0575554 (4565 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] NR_IRQS:2304 nr_irqs:440
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1197.045 MHz processor.
[ 0.001487] Console: colour VGA+ 80x25
[ 0.001493] console [tty0] enabled
[ 0.001747] hpet clockevent registered
[ 0.001752] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.001760] Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.09 BogoMIPS (lpj=4788180)
[ 0.001784] Security Framework initialized
[ 0.001811] AppArmor: AppArmor initialized
[ 0.001821] Mount-cache hash table entries: 512
[ 0.001991] Initializing cgroup subsys ns
[ 0.001997] Initializing cgroup subsys cpuacct
[ 0.002004] Initializing cgroup subsys memory
[ 0.002013] Initializing cgroup subsys freezer
[ 0.002017] Initializing cgroup subsys net_cls
[ 0.002037] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 0.002041] CPU: L2 cache: 1024K
[ 0.002048] mce: CPU supports 6 MCE banks
[ 0.002057] CPU0: Thermal monitoring handled by SMI
[ 0.002062] using mwait in idle threads.
[ 0.002072] Performance Counters: Core2 events, Intel PMU driver.
[ 0.002084] ... version: 2
[ 0.002087] ... bit width: 40
[ 0.002089] ... generic counters: 2
[ 0.002092] ... value mask: 000000ffffffffff
[ 0.002095] ... max period: 000000007fffffff
[ 0.002098] ... fixed-purpose counters: 3
[ 0.002101] ... counter mask: 0000000700000003
[ 0.002109] Checking 'hlt' instruction... OK.
[ 0.017277] SMP alternatives: switching to UP code
[ 0.028007] ACPI: Core revision 20090521
[ 0.052423] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.094054] CPU0: Intel(R) Celeron(R) CPU 723 @ 1.20GHz stepping 0a
[ 0.096001] Brought up 1 CPUs
[ 0.096001] Total of 1 processors activated (2394.09 BogoMIPS).
[ 0.096001] CPU0 attaching NULL sched-domain.
[ 0.096001] Booting paravirtualized kernel on bare hardware
[ 0.096001] regulator: core version 0.5
[ 0.096001] Time: 20:10:52 Date: 11/02/09
[ 0.096001] NET: Registered protocol family 16
[ 0.096001] EISA bus registered
[ 0.096001] ACPI: bus type pci registered
[ 0.096001] PCI: MCFG configuration 0: base f8000000 segment 0 buses 0 - 63
[ 0.096001] PCI: MCFG area at f8000000 reserved in E820
[ 0.096001] PCI: Using MMCONFIG for extended config space
[ 0.096001] PCI: Using configuration type 1 for base access
[ 0.096001] bio: create slab <bio-0> at 0
[ 0.096302] ACPI: EC: Look up EC in DSDT
[ 0.104704] ACPI: BIOS _OSI(Linux) query ignored
[ 0.105782] ACPI: EC: non-query interrupt received, switching to interrupt mode
[ 0.136163] ACPI: Interpreter enabled
[ 0.136170] ACPI: (supports S0 S3 S4 S5)
[ 0.136215] ACPI: Using IOAPIC for interrupt routing
[ 0.169621] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.169625] ACPI: EC: driver started in interrupt mode
[ 0.170146] ACPI: No dock devices found.
[ 0.170910] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.172125] pci 0000:00:02.0: reg 10 64bit mmio: [0x90000000-0x903fffff]
[ 0.172136] pci 0000:00:02.0: reg 18 64bit mmio: [0x80000000-0x8fffffff]
[ 0.172143] pci 0000:00:02.0: reg 20 io port: [0x4110-0x4117]
[ 0.172199] pci 0000:00:02.1: reg 10 64bit mmio: [0x000000-0x0fffff]
[ 0.172361] pci 0000:00:1a.0: reg 20 io port: [0x40e0-0x40ff]
[ 0.172499] pci 0000:00:1a.1: reg 20 io port: [0x40c0-0x40df]
[ 0.172620] pci 0000:00:1a.7: reg 10 32bit mmio: [0x94405c00-0x94405fff]
[ 0.172700] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.172707] pci 0000:00:1a.7: PME# disabled
[ 0.172772] pci 0000:00:1b.0: reg 10 64bit mmio: [0x94400000-0x94403fff]
[ 0.172841] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.172847] pci 0000:00:1b.0: PME# disabled
[ 0.172944] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.172950] pci 0000:00:1c.0: PME# disabled
[ 0.173048] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.173054] pci 0000:00:1c.1: PME# disabled
[ 0.173157] pci 0000:00:1d.0: reg 20 io port: [0x40a0-0x40bf]
[ 0.173297] pci 0000:00:1d.1: reg 20 io port: [0x4080-0x409f]
[ 0.173438] pci 0000:00:1d.2: reg 20 io port: [0x4060-0x407f]
[ 0.173577] pci 0000:00:1d.3: reg 20 io port: [0x4040-0x405f]
[ 0.173696] pci 0000:00:1d.7: reg 10 32bit mmio: [0x94405800-0x94405bff]
[ 0.173776] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.173783] pci 0000:00:1d.7: PME# disabled
[ 0.174037] pci 0000:00:1f.2: reg 10 io port: [0x4108-0x410f]
[ 0.174046] pci 0000:00:1f.2: reg 14 io port: [0x411c-0x411f]
[ 0.174055] pci 0000:00:1f.2: reg 18 io port: [0x4100-0x4107]
[ 0.174065] pci 0000:00:1f.2: reg 1c io port: [0x4118-0x411b]
[ 0.174074] pci 0000:00:1f.2: reg 20 io port: [0x4020-0x403f]
[ 0.174084] pci 0000:00:1f.2: reg 24 32bit mmio: [0x94405000-0x944057ff]
[ 0.174134] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.174140] pci 0000:00:1f.2: PME# disabled
[ 0.174185] pci 0000:00:1f.3: reg 10 64bit mmio: [0x94406000-0x944060ff]
[ 0.174208] pci 0000:00:1f.3: reg 20 io port: [0x4000-0x401f]
[ 0.174283] pci 0000:00:1f.6: reg 10 64bit mmio: [0x94404000-0x94404fff]
[ 0.174425] pci 0000:01:00.0: reg 10 64bit mmio: [0x93400000-0x9343ffff]
[ 0.174438] pci 0000:01:00.0: reg 18 io port: [0x3000-0x307f]
[ 0.174526] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.174533] pci 0000:01:00.0: PME# disabled
[ 0.174612] pci 0000:00:1c.0: bridge io port: [0x3000-0x3fff]
[ 0.174619] pci 0000:00:1c.0: bridge 32bit mmio: [0x93400000-0x943fffff]
[ 0.174629] pci 0000:00:1c.0: bridge 64bit mmio pref: [0x90400000-0x913fffff]
[ 0.174704] pci 0000:02:00.0: reg 10 64bit mmio: [0x92400000-0x9240ffff]
[ 0.174797] pci 0000:02:00.0: supports D1
[ 0.174800] pci 0000:02:00.0: PME# supported from D0 D1 D3hot
[ 0.174808] pci 0000:02:00.0: PME# disabled
[ 0.174894] pci 0000:00:1c.1: bridge io port: [0x2000-0x2fff]
[ 0.174900] pci 0000:00:1c.1: bridge 32bit mmio: [0x92400000-0x933fffff]
[ 0.174909] pci 0000:00:1c.1: bridge 64bit mmio pref: [0x91400000-0x923fffff]
[ 0.174975] pci 0000:00:1e.0: transparent bridge
[ 0.175012] pci_bus 0000:00: on NUMA node 0
[ 0.175023] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.175461] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 0.175553] ACPI Warning: \_SB_.PCI0.P32_._PRT: Return Package has no elements (empty) 20090521 nspredef-434
[ 0.175664] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.175831] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.203709] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.203935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.204165] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.204385] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.204605] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.204826] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.205049] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.205269] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.205576] SCSI subsystem initialized
[ 0.205641] libata version 3.00 loaded.
[ 0.205738] usbcore: registered new interface driver usbfs
[ 0.205760] usbcore: registered new interface driver hub
[ 0.205793] usbcore: registered new device driver usb
[ 0.206093] ACPI: WMI: Mapper loaded
[ 0.206096] PCI: Using ACPI for IRQ routing
[ 0.206312] Bluetooth: Core ver 2.15
[ 0.206349] NET: Registered protocol family 31
[ 0.206352] Bluetooth: HCI device and connection manager initialized
[ 0.206356] Bluetooth: HCI socket layer initialized
[ 0.206358] NetLabel: Initializing
[ 0.206361] NetLabel: domain hash size = 128
[ 0.206363] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.206380] NetLabel: unlabeled traffic allowed by default
[ 0.206418] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.206426] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.213903] pnp: PnP ACPI init
[ 0.213927] ACPI: bus type pnp registered
[ 0.217086] pnp: PnP ACPI: found 9 devices
[ 0.217090] ACPI: ACPI bus type pnp unregistered
[ 0.217094] PnPBIOS: Disabled by ACPI PNP
[ 0.217111] system 00:01: ioport range 0x164e-0x164f has been reserved
[ 0.217117] system 00:01: ioport range 0x600-0x60f has been reserved
[ 0.217121] system 00:01: ioport range 0x610-0x610 has been reserved
[ 0.217125] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.217129] system 00:01: ioport range 0x810-0x817 has been reserved
[ 0.217134] system 00:01: ioport range 0x820-0x823 has been reserved
[ 0.217138] system 00:01: ioport range 0x400-0x47f has been reserved
[ 0.217142] system 00:01: ioport range 0x500-0x53f has been reserved
[ 0.217147] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.217152] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.217156] system 00:01: iomem range 0xfed10000-0xfed13fff has been reserved
[ 0.217161] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.217165] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.217170] system 00:01: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.217174] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.217179] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.217183] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.217188] system 00:01: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.217192] system 00:01: iomem range 0xff800000-0xff800fff has been reserved
[ 0.251914] AppArmor: AppArmor Filesystem Enabled
[ 0.251970] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:01
[ 0.251976] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.251985] pci 0000:00:1c.0: MEM window: 0x93400000-0x943fffff
[ 0.251991] pci 0000:00:1c.0: PREFETCH window: 0x00000090400000-0x000000913fffff
[ 0.252007] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:02
[ 0.252012] pci 0000:00:1c.1: IO window: 0x2000-0x2fff
[ 0.252020] pci 0000:00:1c.1: MEM window: 0x92400000-0x933fffff
[ 0.252026] pci 0000:00:1c.1: PREFETCH window: 0x00000091400000-0x000000923fffff
[ 0.252036] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:03
[ 0.252039] pci 0000:00:1e.0: IO window: disabled
[ 0.252046] pci 0000:00:1e.0: MEM window: disabled
[ 0.252052] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.252069] alloc irq_desc for 16 on node -1
[ 0.252072] alloc kstat_irqs on node -1
[ 0.252080] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.252087] pci 0000:00:1c.0: setting latency timer to 64
[ 0.252097] alloc irq_desc for 17 on node -1
[ 0.252100] alloc kstat_irqs on node -1
[ 0.252105] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.252112] pci 0000:00:1c.1: setting latency timer to 64
[ 0.252121] pci 0000:00:1e.0: setting latency timer to 64
[ 0.252128] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.252132] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.252137] pci_bus 0000:01: resource 0 io: [0x3000-0x3fff]
[ 0.252141] pci_bus 0000:01: resource 1 mem: [0x93400000-0x943fffff]
[ 0.252145] pci_bus 0000:01: resource 2 pref mem [0x90400000-0x913fffff]
[ 0.252149] pci_bus 0000:02: resource 0 io: [0x2000-0x2fff]
[ 0.252153] pci_bus 0000:02: resource 1 mem: [0x92400000-0x933fffff]
[ 0.252157] pci_bus 0000:02: resource 2 pref mem [0x91400000-0x923fffff]
[ 0.252161] pci_bus 0000:03: resource 3 io: [0x00-0xffff]
[ 0.252165] pci_bus 0000:03: resource 4 mem: [0x000000-0xffffffff]
[ 0.252211] NET: Registered protocol family 2
[ 0.252339] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.252744] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.253341] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.253686] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.253690] TCP reno registered
[ 0.253831] NET: Registered protocol family 1
[ 0.253913] Trying to unpack rootfs image as initramfs...
[ 0.503999] Switched to high resolution mode on CPU 0
[ 0.559040] Freeing initrd memory: 7462k freed
[ 0.563091] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 0.563096] Simple Boot Flag at 0x44 set to 0x1
[ 0.563264] cpufreq-nforce2: No nForce2 chipset.
[ 0.563301] Scanning for low memory corruption every 60 seconds
[ 0.563442] audit: initializing netlink socket (disabled)
[ 0.563464] type=2000 audit(1257192652.560:1): initialized
[ 0.577616] highmem bounce pool size: 64 pages
[ 0.577624] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.579639] VFS: Disk quotas dquot_6.5.2
[ 0.579717] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.580515] fuse init (API version 7.12)
[ 0.580635] msgmni has been set to 1707
[ 0.580880] alg: No test for stdrng (krng)
[ 0.580896] io scheduler noop registered
[ 0.580899] io scheduler anticipatory registered
[ 0.580902] io scheduler deadline registered
[ 0.580965] io scheduler cfq registered (default)
[ 0.580980] pci 0000:00:02.0: Boot video device
[ 2.180009] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.780008] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 3.780288] alloc irq_desc for 24 on node -1
[ 3.780291] alloc kstat_irqs on node -1
[ 3.780306] pcieport-driver 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 3.780320] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.780508] alloc irq_desc for 25 on node -1
[ 3.780512] alloc kstat_irqs on node -1
[ 3.780523] pcieport-driver 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 3.780536] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.780665] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 3.780842] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 3.783918] ACPI: AC Adapter [ADP1] (on-line)
[ 3.784014] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 3.784020] ACPI: Power Button [PWRF]
[ 3.784087] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 3.787281] ACPI: Lid Switch [LID0]
[ 3.787347] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2
[ 3.787355] ACPI: Sleep Button [SLPB]
[ 3.788866] Monitor-Mwait will be used to enter C-1 state
[ 3.788900] Monitor-Mwait will be used to enter C-2 state
[ 3.788911] Marking TSC unstable due to TSC halts in idle
[ 3.788931] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 3.788963] processor LNXCPU:00: registered as cooling_device0
[ 3.824455] thermal LNXTHERM:01: registered as thermal_zone0
[ 3.824467] ACPI: Thermal Zone [TZS0] (24 C)
[ 3.839461] thermal LNXTHERM:02: registered as thermal_zone1
[ 3.839472] ACPI: Thermal Zone [TZS1] (24 C)
[ 3.839538] isapnp: Scanning for PnP cards...
[ 3.888773] ACPI: Battery Slot [BAT0] (battery absent)
[ 4.193822] isapnp: No Plug & Play device found
[ 4.195492] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 4.197270] brd: module loaded
[ 4.197872] loop: module loaded
[ 4.197972] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 4.198066] ahci 0000:00:1f.2: version 3.0
[ 4.198084] alloc irq_desc for 19 on node -1
[ 4.198088] alloc kstat_irqs on node -1
[ 4.198097] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.198136] alloc irq_desc for 26 on node -1
[ 4.198139] alloc kstat_irqs on node -1
[ 4.198151] ahci 0000:00:1f.2: irq 26 for MSI/MSI-X
[ 4.198205] ahci: SSS flag set, parallel bus scan disabled
[ 4.198253] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.198258] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems
[ 4.198266] ahci 0000:00:1f.2: setting latency timer to 64
[ 4.220089] scsi0 : ahci
[ 4.220220] scsi1 : ahci
[ 4.220288] scsi2 : ahci
[ 4.220358] scsi3 : ahci
[ 4.220436] scsi4 : ahci
[ 4.220504] scsi5 : ahci
[ 4.220875] ata1: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405100 irq 26
[ 4.220881] ata2: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405180 irq 26
[ 4.220884] ata3: DUMMY
[ 4.220887] ata4: DUMMY
[ 4.220891] ata5: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405300 irq 26
[ 4.220896] ata6: SATA max UDMA/133 abar m2048@0x94405000 port 0x94405380 irq 26
[ 4.222025] Fixed MDIO Bus: probed
[ 4.222074] PPP generic driver version 2.4.2
[ 4.222207] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.222233] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 4.222255] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 4.222260] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 4.222327] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.226242] ehci_hcd 0000:00:1a.7: debug port 1
[ 4.226250] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
[ 4.226394] ehci_hcd 0000:00:1a.7: irq 19, io mem 0x94405c00
[ 4.240020] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.240114] usb usb1: configuration #1 chosen from 1 choice
[ 4.240155] hub 1-0:1.0: USB hub found
[ 4.240165] hub 1-0:1.0: 4 ports detected
[ 4.240235] alloc irq_desc for 23 on node -1
[ 4.240238] alloc kstat_irqs on node -1
[ 4.240246] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.240260] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 4.240264] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.240305] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.244216] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.244224] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 4.244241] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x94405800
[ 4.260020] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.260119] usb usb2: configuration #1 chosen from 1 choice
[ 4.260156] hub 2-0:1.0: USB hub found
[ 4.260165] hub 2-0:1.0: 8 ports detected
[ 4.260244] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.260268] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.260304] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.260314] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 4.260319] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.260361] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.260404] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000040e0
[ 4.260505] usb usb3: configuration #1 chosen from 1 choice
[ 4.260541] hub 3-0:1.0: USB hub found
[ 4.260550] hub 3-0:1.0: 2 ports detected
[ 4.260610] alloc irq_desc for 21 on node -1
[ 4.260613] alloc kstat_irqs on node -1
[ 4.260620] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 4.260629] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 4.260634] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.260673] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.260713] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000040c0
[ 4.260814] usb usb4: configuration #1 chosen from 1 choice
[ 4.260850] hub 4-0:1.0: USB hub found
[ 4.260858] hub 4-0:1.0: 2 ports detected
[ 4.260923] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.260932] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.260936] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.260981] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.261012] uhci_hcd 0000:00:1d.0: irq 23, io base 0x000040a0
[ 4.261116] usb usb5: configuration #1 chosen from 1 choice
[ 4.261156] hub 5-0:1.0: USB hub found
[ 4.261164] hub 5-0:1.0: 2 ports detected
[ 4.261221] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.261229] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.261234] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.261273] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.261304] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004080
[ 4.261405] usb usb6: configuration #1 chosen from 1 choice
[ 4.261446] hub 6-0:1.0: USB hub found
[ 4.261455] hub 6-0:1.0: 2 ports detected
[ 4.261514] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 4.261523] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.261527] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.261569] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.261600] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00004060
[ 4.261703] usb usb7: configuration #1 chosen from 1 choice
[ 4.261740] hub 7-0:1.0: USB hub found
[ 4.261752] hub 7-0:1.0: 2 ports detected
[ 4.261808] alloc irq_desc for 18 on node -1
[ 4.261811] alloc kstat_irqs on node -1
[ 4.261818] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.261828] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 4.261833] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.261873] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 4.261914] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00004040
[ 4.262020] usb usb8: configuration #1 chosen from 1 choice
[ 4.262057] hub 8-0:1.0: USB hub found
[ 4.262065] hub 8-0:1.0: 2 ports detected
[ 4.262191] PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 4.273508] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 4.281486] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.281494] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 4.281498] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 4.281503] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 4.281507] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 4.281582] mice: PS/2 mouse device common for all mice
[ 4.281721] rtc_cmos 00:03: RTC can wake from S4
[ 4.281769] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 4.281804] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.281947] device-mapper: uevent: version 1.0.3
[ 4.282069] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 4.282172] device-mapper: multipath: version 1.1.0 loaded
[ 4.282176] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 4.282326] EISA: Probing bus 0 at eisa.0
[ 4.282338] Cannot allocate resource for EISA slot 2
[ 4.282341] Cannot allocate resource for EISA slot 3
[ 4.282344] Cannot allocate resource for EISA slot 4
[ 4.282364] EISA: Detected 0 cards.
[ 4.282458] cpuidle: using governor ladder
[ 4.282520] cpuidle: using governor menu
[ 4.283156] TCP cubic registered
[ 4.283373] NET: Registered protocol family 10
[ 4.283945] lo: Disabled Privacy Extensions
[ 4.284365] NET: Registered protocol family 17
[ 4.284389] Bluetooth: L2CAP ver 2.13
[ 4.284391] Bluetooth: L2CAP socket layer initialized
[ 4.284395] Bluetooth: SCO (Voice Link) ver 0.6
[ 4.284397] Bluetooth: SCO socket layer initialized
[ 4.284431] Bluetooth: RFCOMM TTY layer initialized
[ 4.284435] Bluetooth: RFCOMM socket layer initialized
[ 4.284438] Bluetooth: RFCOMM ver 1.11
[ 4.284472] Using IPI No-Shortcut mode
[ 4.284574] PM: Resume from disk failed.
[ 4.284589] registered taskstats version 1
[ 4.284741] Magic number: 1:917:193
[ 4.284786] acpi device:1f: hash matches
[ 4.284834] rtc_cmos 00:03: setting system clock to 2009-11-02 20:10:56 UTC (1257192656)
[ 4.284838] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 4.284840] EDD information not available.
[ 4.303725] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 4.558034] ata1: SATA link down (SStatus 0 SControl 300)
[ 4.612027] usb 2-5: new high speed USB device using ehci_hcd and address 2
[ 5.003231] usb 2-5: configuration #1 chosen from 1 choice
[ 5.096040] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.097455] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 5.097596] ata2.00: ATA-8: Hitachi HTS545025B9A300, PB2OC60F, max UDMA/133
[ 5.097601] ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 5.099166] ata2.00: ACPI cmd 00/00:00:00:00:00:b0 rejected by device (Stat=0x51 Err=0x04)
[ 5.099344] ata2.00: configured for UDMA/133
[ 5.112242] scsi 1:0:0:0: Direct-Access ATA Hitachi HTS54502 PB2O PQ: 0 ANSI: 5
[ 5.112401] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 5.112455] sd 1:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 5.112518] sd 1:0:0:0: [sda] Write Protect is off
[ 5.112523] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.112556] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.112721] sda: sda1 sda2 sda3
[ 5.135577] sd 1:0:0:0: [sda] Attached SCSI disk
[ 6.000037] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 6.003926] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 6.003934] ata5.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.00, max UDMA/33
[ 6.011869] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 rejected by device (Stat=0x51 Err=0x04)
[ 6.011913] ata5.00: configured for UDMA/33
[ 6.035460] scsi 4:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.00 PQ: 0 ANSI: 5
[ 6.050430] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.050434] Uniform CD-ROM driver Revision: 3.20
[ 6.050539] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.050598] sr 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.368036] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.384042] Freeing unused kernel memory: 540k freed
[ 6.384328] Write protecting the kernel text: 4568k
[ 6.384372] Write protecting the kernel read-only data: 1836k
[ 6.656771] Linux agpgart interface v0.103
[ 6.661430] agpgart-intel 0000:00:00.0: Intel Mobile Intel® GM45 Express Chipset
[ 6.661834] agpgart-intel 0000:00:00.0: detected 65532K stolen memory
[ 6.664901] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0x80000000
[ 6.817606] [drm] Initialized drm 1.1.0 20060810
[ 6.837277] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 6.837285] i915 0000:00:02.0: setting latency timer to 64
[ 6.839555] alloc irq_desc for 27 on node -1
[ 6.839559] alloc kstat_irqs on node -1
[ 6.839571] i915 0000:00:02.0: irq 27 for MSI/MSI-X
[ 6.947894] [drm] i2c_init DPDDC-B
[ 6.959159] [drm] i2c_init DPDDC-D
[ 7.090275] i2c-adapter i2c-2: unable to read EDID block.
[ 7.090281] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 7.100284] [drm] fb0: inteldrmfb frame buffer device
[ 7.125358] acpi device:03: registered as cooling_device1
[ 7.125867] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/input/input5
[ 7.125914] ACPI: Video Device [OVGA] (multi-head: yes rom: no post: no)
[ 7.125985] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.507697] [drm] LVDS-8: set mode 1366x768 14
[ 8.073221] Console: switching to colour frame buffer device 170x48
[ 8.507860] PM: Starting manual resume from disk
[ 8.507866] PM: Resume from partition 8:1
[ 8.507869] PM: Checking hibernation image.
[ 8.507999] PM: Resume from disk failed.
[ 8.533051] EXT4-fs (sda2): barriers enabled
[ 8.546384] kjournald2 starting: pid 379, dev sda2:8, commit interval 5 seconds
[ 8.546400] EXT4-fs (sda2): delayed allocation enabled
[ 8.546404] EXT4-fs: file extents enabled
[ 8.547756] EXT4-fs: mballoc enabled
[ 8.547774] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 9.128513] type=1505 audit(1257192661.343:2): operation="profile_load" pid=402 name=/usr/share/gdm/guest-session/Xsession
[ 9.131590] type=1505 audit(1257192661.343:3): operation="profile_load" pid=403 name=/sbin/dhclient3
[ 9.132819] type=1505 audit(1257192661.347:4): operation="profile_load" pid=403 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 9.133475] type=1505 audit(1257192661.347:5): operation="profile_load" pid=403 name=/usr/lib/connman/scripts/dhclient-script
[ 9.182288] type=1505 audit(1257192661.395:6): operation="profile_load" pid=404 name=/usr/bin/evince
[ 9.201019] type=1505 audit(1257192661.415:7): operation="profile_load" pid=404 name=/usr/bin/evince-previewer
[ 9.212094] type=1505 audit(1257192661.427:8): operation="profile_load" pid=404 name=/usr/bin/evince-thumbnailer
[ 9.236169] type=1505 audit(1257192661.451:9): operation="profile_load" pid=406 name=/usr/lib/cups/backend/cups-pdf
[ 9.237573] type=1505 audit(1257192661.451:10): operation="profile_load" pid=406 name=/usr/sbin/cupsd
[ 9.270022] type=1505 audit(1257192661.483:11): operation="profile_load" pid=407 name=/usr/sbin/ntpd
[ 9.867540] Adding 4104568k swap on /dev/sda1. Priority:-1 extents:1 across:4104568k
[ 10.191302] udev: starting version 147
[ 10.515439] EXT4-fs (sda2): internal journal on sda2:8
[ 11.037868] atl1c 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 11.037883] atl1c 0000:01:00.0: setting latency timer to 64
[ 11.037934] atl1c 0000:01:00.0: PME# disabled
[ 11.037941] atl1c 0000:01:00.0: PME# disabled
[ 11.144958] atl1c 0000:01:00.0: version 1.0.0.1-NAPI
[ 11.196770] acer-wmi: Acer Laptop ACPI-WMI Extras
[ 11.206008] acer-wmi: Brightness must be controlled by generic video driver
[ 11.349568] lp: driver loaded but no devices found
[ 11.635030] cfg80211: Calling CRDA to update world regulatory domain
[ 11.695595] Linux video capture interface: v2.00
[ 12.117662] uvcvideo: Found UVC 1.00 device CNF9113 (04f2:b160)
[ 12.129415] input: CNF9113 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input6
[ 12.129478] usbcore: registered new interface driver uvcvideo
[ 12.129486] USB Video Class driver (v0.1.0)
[ 12.159518] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 12.219241] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio2/input/input7
[ 12.400031] usb 3-2: new full speed USB device using uhci_hcd and address 2
[ 12.570197] usb 3-2: configuration #1 chosen from 1 choice
[ 13.053368] EXT4-fs (sda3): barriers enabled
[ 13.053636] kjournald2 starting: pid 714, dev sda3:8, commit interval 5 seconds
[ 13.062931] EXT4-fs (sda3): internal journal on sda3:8
[ 13.062937] EXT4-fs (sda3): delayed allocation enabled
[ 13.062941] EXT4-fs: file extents enabled
[ 13.087183] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 13.102579] Bluetooth: Generic Bluetooth USB driver ver 0.5
[ 13.102741] usbcore: registered new interface driver btusb
[ 13.111155] EXT4-fs: mballoc enabled
[ 13.111179] EXT4-fs (sda3): mounted filesystem with ordered data mode
[ 13.799053] ath9k 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 13.799070] ath9k 0000:02:00.0: setting latency timer to 64
[ 14.234038] ath: EEPROM regdomain: 0x65
[ 14.234041] ath: EEPROM indicates we should expect a direct regpair map
[ 14.234046] ath: Country alpha2 being used: 00
[ 14.234049] ath: Regpair used: 0x65
[ 14.364044] cfg80211: World regulatory domain updated:
[ 14.364050] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.364055] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.364059] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.364063] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.364066] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.364070] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.686287] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 14.687191] Registered led device: ath9k-phy0::radio
[ 14.687218] Registered led device: ath9k-phy0::assoc
[ 14.687242] Registered led device: ath9k-phy0::tx
[ 14.687267] Registered led device: ath9k-phy0::rx
[ 14.687295] phy0: Atheros AR9280 MAC/BB Rev:2 AR5133 RF Rev:d0: mem=0xf9600000, irq=17
[ 15.365345] __ratelimit: 3 callbacks suppressed
[ 15.365350] type=1505 audit(1257192667.579:13): operation="profile_replace" pid=809 name=/usr/share/gdm/guest-session/Xsession
[ 15.368146] type=1505 audit(1257192667.583:14): operation="profile_replace" pid=810 name=/sbin/dhclient3
[ 15.369415] type=1505 audit(1257192667.583:15): operation="profile_replace" pid=810 name=/usr/lib/NetworkManager/nm-dhcp-client.action
[ 15.370074] type=1505 audit(1257192667.583:16): operation="profile_replace" pid=810 name=/usr/lib/connman/scripts/dhclient-script
[ 15.376640] type=1505 audit(1257192667.591:17): operation="profile_replace" pid=811 name=/usr/bin/evince
[ 15.395751] type=1505 audit(1257192667.607:18): operation="profile_replace" pid=811 name=/usr/bin/evince-previewer
[ 15.407625] type=1505 audit(1257192667.619:19): operation="profile_replace" pid=811 name=/usr/bin/evince-thumbnailer
[ 15.428281] alloc irq_desc for 22 on node -1
[ 15.428286] alloc kstat_irqs on node -1
[ 15.428296] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 15.428344] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 15.430413] type=1505 audit(1257192667.643:20): operation="profile_replace" pid=813 name=/usr/lib/cups/backend/cups-pdf
[ 15.431863] type=1505 audit(1257192667.643:21): operation="profile_replace" pid=813 name=/usr/sbin/cupsd
[ 15.435936] type=1505 audit(1257192667.647:22): operation="profile_replace" pid=814 name=/usr/sbin/ntpd
[ 15.621379] hda_codec: Unknown model for ALC269, trying auto-probe from BIOS...
[ 15.621501] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
[ 21.784146] alloc irq_desc for 28 on node -1
[ 21.784151] alloc kstat_irqs on node -1
[ 21.784172] atl1c 0000:01:00.0: irq 28 for MSI/MSI-X
[ 21.784706] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 22.032229] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 24.561350] ppdev: user-space parallel port driver
[ 24.773505] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 24.773509] Bluetooth: BNEP filters: protocol multicast
[ 24.902725] Bridge firewalling registered
[ 26.145288] i2c-adapter i2c-2: unable to read EDID block.
[ 26.145295] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 26.150415] i2c-adapter i2c-2: unable to read EDID block.
[ 26.150421] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 26.405051] i2c-adapter i2c-2: unable to read EDID block.
[ 26.405059] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 26.411013] i2c-adapter i2c-2: unable to read EDID block.
[ 26.411020] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 31.860308] i2c-adapter i2c-2: unable to read EDID block.
[ 31.860315] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 31.864740] i2c-adapter i2c-2: unable to read EDID block.
[ 31.864744] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 32.011667] i2c-adapter i2c-2: unable to read EDID block.
[ 32.011674] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 32.016636] i2c-adapter i2c-2: unable to read EDID block.
[ 32.016641] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 32.183830] i2c-adapter i2c-2: unable to read EDID block.
[ 32.183837] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 32.188808] i2c-adapter i2c-2: unable to read EDID block.
[ 32.188812] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 48.893689] i2c-adapter i2c-2: unable to read EDID block.
[ 48.893696] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 48.898789] i2c-adapter i2c-2: unable to read EDID block.
[ 48.898794] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 49.059028] i2c-adapter i2c-2: unable to read EDID block.
[ 49.059034] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 49.063990] i2c-adapter i2c-2: unable to read EDID block.
[ 49.063994] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 49.211708] i2c-adapter i2c-2: unable to read EDID block.
[ 49.211715] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 49.216677] i2c-adapter i2c-2: unable to read EDID block.
[ 49.216681] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 52.232569] i2c-adapter i2c-2: unable to read EDID block.
[ 52.232575] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 52.237673] i2c-adapter i2c-2: unable to read EDID block.
[ 52.237679] i915 0000:00:02.0: HDMI Type A-1: no EDID data
[ 135.264501] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 135.464032] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 135.467548] wlan0: authenticated
[ 135.467552] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 135.664051] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 135.864030] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 135.869279] wlan0: RX AssocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 135.869284] wlan0: associated
[ 135.869776] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 136.951033] padlock: VIA PadLock not detected.
[ 146.484034] wlan0: no IPv6 routers present
[ 173.844030] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 175.030859] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 175.034725] wlan0: authenticated
[ 175.034732] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 175.037249] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 175.037254] wlan0: associated
[ 203.856032] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 205.049885] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 205.054624] wlan0: authenticated
[ 205.054632] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 205.058548] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 205.058554] wlan0: associated
[ 218.016037] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 219.170896] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 219.368032] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 219.371218] wlan0: authenticated
[ 219.371224] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 219.374460] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 219.374466] wlan0: associated
[ 263.868026] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 265.049735] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 265.052249] wlan0: authenticated
[ 265.052255] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 265.054775] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 265.054782] wlan0: associated
[ 724.072029] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 725.250896] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 725.253769] wlan0: authenticated
[ 725.253776] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 725.257282] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 725.257288] wlan0: associated
[ 834.815572] wlan0: deauthenticated (Reason: 7)
[ 835.812041] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 835.814799] wlan0 direct probe responded
[ 835.814803] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 835.816784] wlan0: authenticated
[ 835.816788] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 835.819314] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 835.819318] wlan0: associated
[ 845.822701] wlan0: disassociating by local choice (reason=3)
[ 847.924958] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 848.124027] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 848.324033] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 848.524024] wlan0: authentication with AP 00:1d:7e:60:fd:fd timed out
[ 863.978737] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 863.991596] wlan0: authenticated
[ 863.991602] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 863.994030] wlan0: RX AssocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 863.994035] wlan0: associated
[ 963.580025] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 988.958752] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 989.156027] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 989.356029] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 989.556026] wlan0: authentication with AP 00:1d:7e:60:fd:fd timed out
[ 1030.298759] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1030.303088] wlan0: authenticated
[ 1030.303094] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1030.306834] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1030.306839] wlan0: associated
[ 1233.616024] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1313.506727] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1313.508756] wlan0: authenticated
[ 1313.508762] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1313.524455] wlan0: deauthenticated (Reason: 6)
[ 1314.524026] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 1314.526281] wlan0 direct probe responded
[ 1314.526285] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1314.528498] wlan0: authenticated
[ 1314.528503] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1314.533364] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1314.533368] wlan0: associated
[ 1320.584026] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1321.738719] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1321.742017] wlan0: authenticated
[ 1321.742023] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1321.756720] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1321.756726] wlan0: associated
[ 1331.796033] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1345.058065] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1345.060056] wlan0: authenticated
[ 1345.060062] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1345.067494] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1345.067500] wlan0: associated
[ 1355.080024] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1362.290867] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1362.292953] wlan0: authenticated
[ 1362.292961] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1362.295558] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1362.295563] wlan0: associated
[ 1405.909099] wlan0: deauthenticated (Reason: 7)
[ 1406.908024] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 1406.910780] wlan0 direct probe responded
[ 1406.910784] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1406.912729] wlan0: authenticated
[ 1406.912733] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1406.915302] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1406.915306] wlan0: associated
[ 1437.568036] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1438.722761] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1438.724811] wlan0: authenticated
[ 1438.724817] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1438.727341] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1438.727346] wlan0: associated
[ 1497.428786] wlan0: deauthenticated (Reason: 7)
[ 1498.428029] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 1498.628028] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 2
[ 1498.828028] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 3
[ 1499.028029] wlan0: direct probe to AP 00:1d:7e:60:fd:fd timed out
[ 1506.139048] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 1506.141917] wlan0 direct probe responded
[ 1506.141924] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1506.143898] wlan0: authenticated
[ 1506.143903] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1506.146392] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1506.146396] wlan0: associated
[ 1550.164026] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1563.430752] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1563.432795] wlan0: authenticated
[ 1563.432801] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1563.435320] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1563.435325] wlan0: associated
[ 1581.448028] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1582.602732] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 1582.606789] wlan0 direct probe responded
[ 1582.606795] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1582.609025] wlan0: authenticated
[ 1582.609029] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1582.611597] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1582.611601] wlan0: associated
[ 1669.904035] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1677.122978] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1677.126361] wlan0: authenticated
[ 1677.126367] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1677.128929] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1677.128934] wlan0: associated
[ 1699.164028] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1706.373360] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1706.375413] wlan0: authenticated
[ 1706.375420] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1706.378429] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1706.378435] wlan0: associated
[ 1720.396028] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1733.666751] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1733.669096] wlan0: authenticated
[ 1733.669102] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1733.671633] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1733.671638] wlan0: associated
[ 1777.904032] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1785.114736] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1785.118090] wlan0: authenticated
[ 1785.118097] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1785.120701] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1785.120705] wlan0: associated
[ 1803.476029] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1804.634731] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1804.638072] wlan0: authenticated
[ 1804.638079] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1804.640671] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1804.640675] wlan0: associated
[ 1965.904043] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 1973.130742] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 1973.133071] wlan0: authenticated
[ 1973.133079] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 1973.135690] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 1973.135695] wlan0: associated
[ 2372.515776] wlan0: deauthenticated (Reason: 7)
[ 2373.512025] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 2373.514781] wlan0 direct probe responded
[ 2373.514785] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2373.516785] wlan0: authenticated
[ 2373.516789] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 2373.520304] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 2373.520308] wlan0: associated
[ 2720.440034] wlan0: deauthenticated (Reason: 7)
[ 2721.440031] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 2721.467562] wlan0 direct probe responded
[ 2721.467568] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2721.664025] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2721.864026] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2721.868232] wlan0: authenticated
[ 2721.868236] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 2721.883559] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 2721.883564] wlan0: associated
[ 2731.894209] wlan0: disassociating by local choice (reason=3)
[ 2733.996958] wlan0: direct probe to AP 00:1d:7e:60:fd:fd try 1
[ 2734.001115] wlan0 direct probe responded
[ 2734.001122] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2734.200028] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2734.201968] wlan0: authenticated
[ 2734.201972] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 2734.204513] wlan0: RX AssocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 2734.204518] wlan0: associated
[ 2797.452830] wlan0: disassociating by local choice (reason=3)
[ 2808.562868] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 2808.565799] wlan0: authenticated
[ 2808.565815] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 2808.568325] wlan0: RX AssocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 2808.568329] wlan0: associated
[ 2999.124032] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 3000.303008] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 3000.305069] wlan0: authenticated
[ 3000.305075] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 3000.308340] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 3000.308346] wlan0: associated
[ 3031.880327] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 3033.050960] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 3033.053697] wlan0: authenticated
[ 3033.053703] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 3033.062951] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 3033.062957] wlan0: associated
[ 3175.428048] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 3176.606907] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 3176.611065] wlan0: authenticated
[ 3176.611072] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 3176.616793] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 3176.616798] wlan0: associated
[ 3238.764030] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 3245.974912] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 3245.978342] wlan0: authenticated
[ 3245.978349] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 3245.980827] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 3245.980832] wlan0: associated
[ 3251.992022] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
[ 3288.942854] wlan0: authenticate with AP 00:1d:7e:60:fd:fd
[ 3288.944888] wlan0: authenticated
[ 3288.944895] wlan0: associate with AP 00:1d:7e:60:fd:fd
[ 3288.948574] wlan0: RX ReassocResp from 00:1d:7e:60:fd:fd (capab=0x411 status=0 aid=4)
[ 3288.948580] wlan0: associated
[ 3326.640042] wlan0: no probe response from AP 00:1d:7e:60:fd:fd - disassociating
What I don't understand here is that this laptop came with preinstalled linpus. I've installed ubuntu 9.10 over it thinking: "If it came with preinstalled Linux, great all the hardware is supported" Neeeeeeein. Mistake and burn I'll learn from it now trying to fix problems. I hope someone here would help me fix those problems?
Bookmarks