Bus 001 Device 005: ID 05a9:1550 OmniVision Technologies, Inc. VEHO Filmscanner.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Also known as "Vupoint FS-C1-VP", "VEHO VFS-001", ans some more generic, this one is just called "Filmscanner".
Main vendors are here:
I am almost sure it uses this sensor:
Haven't seen a "yes" or "no" anywhere, and have seen an "almost certain" that it would work with VueScan Scanning Software:
But alas, not detected, nor in GIMP, nor inXszne, or IrfanView in WINE, or SANE.
As for the Win Drivers and software, they use ArcSoft Photoimpression and WINE says "no".
Supplied Photomipression is Version 6.) and there is a 6.5 available:
uid=1000(username) gid=1000(username) groups=4(adm),20(dialout),24(cdrom),29(audio),46(p lugdev),103(fuse),
# sane-find-scanner will now attempt to detect your scanner. If the
# result is different from what you expected, first make sure your
# scanner is powered up and properly connected to your computer.
# No SCSI scanners found. If you expected something different, make sure that
# you have loaded a kernel SCSI driver for your SCSI adapter.
found USB scanner (vendor=0x05a9, product=0x1550) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners.
# Most Scanners connected to the parallel port or other proprietary ports
# can't be detected by this program.
# You may want to run this program as root to find all devices. Once you
# found the scanner devices, be sure to adjust access permissions as
And: dmesg | tail -n15
[ 31.608364] CPU1 attaching sched-domain:
[ 31.608367] domain 0: span 0-1 level MC
[ 31.608371] groups: 1 0
[ 31.608376] domain 1: span 0-1 level CPU
[ 31.608379] groups: 0-1 (__cpu_power = 204
[ 35.570200] CPU0 attaching NULL sched-domain.
[ 35.570212] CPU1 attaching NULL sched-domain.
[ 35.588149] CPU0 attaching sched-domain:
[ 35.588156] domain 0: span 0-1 level CPU
[ 35.588161] groups: 0 1
[ 35.588171] CPU1 attaching sched-domain:
[ 35.588174] domain 0: span 0-1 level CPU
[ 35.588178] groups: 1 0
[ 2196.620276] usb 1-3: new high speed USB device using ehci_hcd and address 4
[ 2196.754190] usb 1-3: configuration #1 chosen from 1 choice
Thanks all, any other ideas?
Original (Closed) Karmic thread: