READ THIS BEFORE: I followed the instructions into this link and now also the CTH460 works fine!
Sorry for the unuseful post!
----------------------------------------------------------------------------
I was an happy user of the Bamboo Fun tablet (model CTE450) with the 9.10; now I have just bought the new
Bamboo Pen&Touch (model CTH460). When I plugged into usb the new one hasn't been recognized.
I followed the 541 post to install an updated driver, but the CH460 tablet is still not recognized and the old one is working fine!
I used the file Favux_Bamboo-Pen&Touch-working_10-wacom.fdi.txt
in /usr/share/hal/fdi/policy/20thirdparty/10-linuxwacom.fdi
where I added the line to recognize the 00d1 device.
What I can see from the terminal:
it21088@IBMT60RDV:~$ lsmod | grep wacom
it21088@IBMT60RDV:~$ wacom 24368 0 (It seems that wacom driver is loaded)
it21088@IBMT60RDV:~$ lsusb
Bus 002 Device 006: ID 056a:00d1 Wacom Co., Ltd (It seems that tablet CH460 is recognized!)
it21088@IBMT60RDV:~$ xinput list --short
"Virtual core pointer" id=0 [XPointer]
"Virtual core keyboard" id=1 [XKeyboard]
"Video Bus" id=2 [XExtensionKeyboard]
"AT Translated Set 2 keyboard" id=3 [XExtensionKeyboard]
"ThinkPad Extra Buttons" id=4 [XExtensionKeyboard]
"Sleep Button" id=5 [XExtensionKeyboard]
"Power Button" id=6 [XExtensionKeyboard]
"SynPS/2 Synaptics TouchPad" id=7 [XExtensionPointer]
"Macintosh mouse button emulation" id=8 [XExtensionPointer]
"TPPS/2 IBM TrackPoint" id=9 [XExtensionPointer]
The CTH460 tablet is not recognized
Looking in Xorg.0.log I found these lines for wacom:
it21088@IBMT60RDV:~$ grep wacom /var/log/Xorg.0.log
(II) LoadModule: "wacom"
(II) Loading /usr/lib/xorg/modules/input//wacom_drv.so
(II) Module wacom: vendor="X.Org Foundation"
(**) Option "Device" "/dev/input/wacom"
(WW) stylus: failed to open /dev/input/wacom in wcmDeviceTypeKeys.
(**) Option "Device" "/dev/input/wacom"
(WW) eraser: failed to open /dev/input/wacom in wcmDeviceTypeKeys.
(**) Option "Device" "/dev/input/wacom"
(WW) pad: failed to open /dev/input/wacom in wcmDeviceTypeKeys.
(**) pad device is /dev/input/wacom
(EE) xf86OpenSerial: Cannot open device /dev/input/wacom
Error opening /dev/input/wacom : No such file or directory
(II) UnloadModule: "wacom"
(**) Option "Device" "/dev/input/wacom-touch"
(WW) touch: failed to open /dev/input/wacom-touch in wcmDeviceTypeKeys.
But here I stop and I'm not able to make firther steps...
Bookmarks