Hi,
I want to use Totem to watch digital TV here in the UK. The codec is installed and all is good, I just need to generate a channel file as described here... http://projects.gnome.org/totem/#dvb
So I've ran this... but get no channels at the end (and yeah it's plugged into the aerial!.. when I reboot into Windows it's fine).
Output of my lspci...
Code:
05:00.0 Multimedia controller: Philips Semiconductors SAA7146 (rev 01)
And finally what I ran and what I got at the end...
Code:
lantizia@ares ~ $ w_scan -X > ~/.gstreamer-0.10/dvb-channels.conf
w_scan version 20081106
Info: using DVB adapter auto detection.
Found DVB-T frontend. Using adapter /dev/dvb/adapter0/frontend0
-_-_-_-_ Getting frontend capabilities-_-_-_-_
frontend LSI L64781 DVB-T supports
INVERSION_AUTO
QAM_AUTO not supported, trying QAM_64.
TRANSMISSION_MODE not supported, trying TRANSMISSION_MODE_8K.
GUARD_INTERVAL_AUTO not supported, trying GUARD_INTERVAL_1_8.
HIERARCHY_AUTO not supported, trying HIERARCHY_NONE.
FEC_AUTO not supported, trying FEC_NONE.
-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_
177500:
184500:
191500:
198500:
205500:
212500:
219500:
226500:
474000:
482000:
490000:
498000:
506000:
514000:
522000:
530000:
538000:
546000:
554000:
562000:
570000:
578000:
586000:
594000:
602000:
610000:
618000:
626000:
634000:
642000:
650000:
658000:
666000:
674000:
682000:
690000:
698000:
706000:
714000:
722000:
730000:
738000:
746000:
754000:
762000:
770000:
778000:
786000:
794000:
802000:
810000:
818000:
826000:
834000:
842000:
850000:
858000:
ERROR: Sorry - i couldn't get any working frequency/transponder
Nothing to scan!!
dumping lists (0 services)
Done.
Any ideas?
Bookmarks