Page 64 of 169 FirstFirst ... 1454626364656674114164 ... LastLast
Results 631 to 640 of 1689

Thread: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

  1. #631
    Join Date
    Apr 2007
    Location
    Mount Horeb, WI
    Beans
    4,312
    Distro
    Kubuntu Development Release

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Quote Originally Posted by Ubuntiac View Post
    I haven't actually added *any* xorg stuff or .fdi's yet. Just followed post 1 (compiling rather than using precompiled, obviously). I used the Kubuntu Lucid AMD64 daily iso from yesterday.

    Here's my outputs:
    xsetwacom list
    Code:
    "N-Trig Pen" eraser ERASER
    "N-Trig Pen"     STYLUS
    "N-Trig Pen" eraser ERASERly
    "N-Trig Pen"     STYLUS
    lshal:
    Code:
    error: dbus_bus_get: org.freedesktop.DBus.Error.FileNotFound: Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory
    Xorg.0.log (last line is kinda interesting):
    Code:
    X.Org X Server 1.7.5
    Release Date: 2010-02-16
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-23-server x86_64 Ubuntu
    Current Operating System: Linux neo 2.6.32-14-generic #20-Ubuntu SMP Sat Feb 20 05:18:19 UTC 2010 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-14-generic root=UUID=a8958942-ab37-44d7-a374-6e2830445e94 ro crashkernel=384M-2G:64M,2G-:128M nomodeset
    Build Date: 19 February 2010  11:38:32AM
    xorg-server 2:1.7.5-1ubuntu1 (buildd@) 
    Current version of pixman: 0.16.4
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Feb 23 02:23:24 2010
    (II) Loader magic: 0x7c8300
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 6.0
    	X.Org XInput driver : 7.0
    	X.Org Server Extension : 2.0
    (--) using VT number 7
    
    (--) PCI:*(0:1:5:0) 1002:7942:1028:0204 ATI Technologies Inc Radeon Xpress 1250 rev 0, Mem @ 0xe0000000/268435456, 0xfeaf0000/65536, I/O @ 0x0000ee00/256
    (==) Using default built-in configuration (30 lines)
    (==) --- Start of built-in configuration ---
    	Section "Device"
    		Identifier	"Builtin Default ati Device 0"
    		Driver	"ati"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default ati Screen 0"
    		Device	"Builtin Default ati Device 0"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default vesa Device 0"
    		Driver	"vesa"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default vesa Screen 0"
    		Device	"Builtin Default vesa Device 0"
    	EndSection
    	Section "Device"
    		Identifier	"Builtin Default fbdev Device 0"
    		Driver	"fbdev"
    	EndSection
    	Section "Screen"
    		Identifier	"Builtin Default fbdev Screen 0"
    		Device	"Builtin Default fbdev Device 0"
    	EndSection
    	Section "ServerLayout"
    		Identifier	"Builtin Default Layout"
    		Screen	"Builtin Default ati Screen 0"
    		Screen	"Builtin Default vesa Screen 0"
    		Screen	"Builtin Default fbdev Screen 0"
    	EndSection
    (==) --- End of built-in configuration ---
    (==) ServerLayout "Builtin Default Layout"
    (**) |-->Screen "Builtin Default ati Screen 0" (0)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default ati Device 0"
    (==) No monitor specified for screen "Builtin Default ati Screen 0".
    	Using a default monitor configuration.
    (**) |-->Screen "Builtin Default vesa Screen 0" (1)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default vesa Device 0"
    (==) No monitor specified for screen "Builtin Default vesa Screen 0".
    	Using a default monitor configuration.
    (**) |-->Screen "Builtin Default fbdev Screen 0" (2)
    (**) |   |-->Monitor "<default monitor>"
    (**) |   |-->Device "Builtin Default fbdev Device 0"
    (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
    	Using a default monitor configuration.
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/100dpi/:unscaled,
    	/usr/share/fonts/X11/75dpi/:unscaled,
    	/usr/share/fonts/X11/Type1,
    	/usr/share/fonts/X11/100dpi,
    	/usr/share/fonts/X11/75dpi,
    	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
    	built-ins
    (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on udev to provide the list of input devices.
    	If no devices become available, reconfigure udev or disable AutoAddDevices.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 2.0
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "dri2"
    (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    (II) Module dri2: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.1.0
    	ABI class: X.Org Server Extension, version 2.0
    (II) Loading extension DRI2
    (II) LoadModule: "ati"
    (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
    (II) Module ati: vendor="X.Org Foundation"
    	compiled for 1.7.3.902, module version = 6.12.99
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "radeon"
    (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
    (II) Module radeon: vendor="X.Org Foundation"
    	compiled for 1.7.3.902, module version = 6.12.99
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "vesa"
    (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) Module vesa: vendor="X.Org Foundation"
    	compiled for 1.7.3.902, module version = 2.3.0
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 6.0
    (II) LoadModule: "fbdev"
    (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    (II) Module fbdev: vendor="X.Org Foundation"
    	compiled for 1.7.2, module version = 0.4.1
    	ABI class: X.Org Video Driver, version 6.0
    (II) RADEON: Driver for ATI Radeon chipsets:
    	ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
    	ATI Radeon Mobility X300 (M24) 3152 (PCIE),
    	ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
    	ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
    	ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
    	ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
    	ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
    	ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
    	ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
    	ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
    	ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
    	ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
    	ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
    	ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
    	ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
    	ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
    	ATI Radeon X800PRO (R420) JI (AGP),
    	ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
    	ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
    	ATI Radeon Mobility 9800 (M18) JN (AGP),
    	ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
    	ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
    	ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
    	ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
    	ATI Radeon Mobility M7 LW (AGP),
    	ATI Mobility FireGL 7800 M7 LX (AGP),
    	ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
    	ATI FireGL Mobility 9000 (M9) Ld (AGP),
    	ATI Radeon Mobility 9000 (M9) Lf (AGP),
    	ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
    	ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
    	ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
    	ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
    	ATI Radeon 9800XT NJ (AGP),
    	ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
    	ATI Radeon Mobility 9600 (M10) NQ (AGP),
    	ATI Radeon Mobility 9600 (M11) NR (AGP),
    	ATI Radeon Mobility 9600 (M10) NS (AGP),
    	ATI FireGL Mobility T2 (M10) NT (AGP),
    	ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
    	ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
    	ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
    	ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
    	ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
    	ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
    	ATI Radeon Mobility X300 (M22) 5460 (PCIE),
    	ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
    	ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
    	ATI Radeon X800PRO (R423) UI (PCIE),
    	ATI Radeon X800LE (R423) UJ (PCIE),
    	ATI Radeon X800SE (R423) UK (PCIE),
    	ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
    	ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
    	ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
    	ATI FireGL unknown (R423) UR (PCIE),
    	ATI FireGL unknown (R423) UT (PCIE),
    	ATI Mobility FireGL V5000 (M26) (PCIE),
    	ATI Mobility FireGL V5000 (M26) (PCIE),
    	ATI Mobility Radeon X700 XL (M26) (PCIE),
    	ATI Mobility Radeon X700 (M26) (PCIE),
    	ATI Mobility Radeon X700 (M26) (PCIE),
    	ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
    	ATI Radeon Mobility 9100 IGP (U3) 5835,
    	ATI Radeon XPRESS 200 5954 (PCIE),
    	ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
    	ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
    	ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
    	ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
    	ATI Radeon XPRESS 200M 5975 (PCIE),
    	ATI Radeon XPRESS 200 5A41 (PCIE),
    	ATI Radeon XPRESS 200M 5A42 (PCIE),
    	ATI Radeon XPRESS 200 5A61 (PCIE),
    	ATI Radeon XPRESS 200M 5A62 (PCIE),
    	ATI Radeon X300 (RV370) 5B60 (PCIE),
    	ATI Radeon X600 (RV370) 5B62 (PCIE),
    	ATI Radeon X550 (RV370) 5B63 (PCIE),
    	ATI FireGL V3100 (RV370) 5B64 (PCIE),
    	ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
    	ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
    	ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
    	ATI Mobility Radeon X800 XT (M28) (PCIE),
    	ATI Mobility FireGL V5100 (M28) (PCIE),
    	ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
    	ATI Radeon X850 XT PE (R480) (PCIE),
    	ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
    	ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
    	ATI Radeon X850 XT (R480) (PCIE),
    	ATI Radeon X800XT (R423) 5D57 (PCIE),
    	ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
    	ATI Radeon X700 PRO (RV410) (PCIE),
    	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
    	ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
    	ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
    	ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
    	ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
    	ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
    	ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
    	ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
    	ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
    	ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
    	ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
    	ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
    	ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
    	ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
    	ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
    	ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
    	ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
    	ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
    	ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
    	ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
    	ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
    	ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
    	ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
    	ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
    	ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
    	ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
    	ATI Mobility Radeon X1700, ATI Radeon X2300HD,
    	ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
    	ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
    	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    	ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
    	ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
    	ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
    	ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
    	ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
    	ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
    	ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
    	ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
    	ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
    	ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
    	ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
    	ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
    	ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
    	ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
    	ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
    	ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
    	AMD FireStream 9250, ATI FirePro V8700 (FireGL),
    	ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
    	ATI Radeon 4800 Series, ATI Radeon 4800 Series, ATI FirePro M7750,
    	ATI M98, ATI M98, ATI M98, ATI Mobility Radeon HD 4650,
    	ATI Radeon RV730 (AGP), ATI Mobility Radeon HD 4670,
    	ATI FirePro M5750, ATI Radeon RV730 (AGP),
    	ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
    	ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
    	ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
    	ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
    	ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
    	ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
    	ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
    	ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
    	ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
    	ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
    	ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
    	ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
    	ATI Mobility Radeon HD 3850 X2, ATI RV670,
    	ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
    	ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
    	ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
    	ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
    	ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
    	ATI Mobility Radeon 4500 Series, ATI FirePro RG220, ATI RV630,
    	ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
    	ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
    	ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
    	ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
    	ATI FireGL V3600, ATI Radeon HD 2600 LE,
    	ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
    	ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
    	ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
    	ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
    	ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
    	ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
    	ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
    	ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
    	ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
    	ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
    	ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
    	ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
    	ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
    	ATI Radeon HD 4200, ATI Radeon 4100, ATI Mobility Radeon HD 4200,
    	ATI Mobility Radeon 4100, ATI RS880
    (II) VESA: driver for VESA chipsets: vesa
    (II) FBDEV: driver for framebuffer: fbdev
    (II) Primary Device is: PCI 01@00:05:0
    (II) [KMS] drm report modesetting isn't supported.
    (WW) Falling back to old probe method for vesa
    (WW) Falling back to old probe method for fbdev
    (II) Loading sub module "fbdevhw"
    (II) LoadModule: "fbdevhw"
    (II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
    (II) Module fbdevhw: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 0.0.2
    	ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): TOTO SAYS 00000000feaf0000
    (II) RADEON(0): MMIO registers at 0x00000000feaf0000: size 64KB
    (II) RADEON(0): PCI bus 1 card 5 func 0
    (II) RADEON(0): Creating default Display subsection in Screen section
    	"Builtin Default ati Screen 0" for depth/fbbpp 24/32
    (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
    (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
    (==) RADEON(0): Default visual is TrueColor
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    (II) Loading /usr/lib/xorg/modules/libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (==) RADEON(0): RGB weight 888
    (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
    (--) RADEON(0): Chipset: "ATI Radeon X1200" (ChipID = 0x7942)
    (--) RADEON(0): Linear framebuffer at 0x00000000e0000000
    (II) RADEON(0): PCI card detected
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    (II) Loading /usr/lib/xorg/modules/libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 6.0
    (II) RADEON(0): initializing int10
    (II) RADEON(0): Primary V_BIOS segment is: 0xc000
    (II) RADEON(0): ATOM BIOS detected
    (II) RADEON(0): ATOM BIOS Rom: 
    	SubsystemVendorID: 0x1028 SubsystemID: 0x0204
    	IOBaseAddress: 0xee00
    	Filename: br26397.bin 
    	BIOS Bootup Message: 
    ATI Radeon Xpress 1250 for Dell/Parker                                      
    
    (II) RADEON(0): Framebuffer space used by Firmware (kb): 20
    (II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
    (II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
    (II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
    (II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
    (II) RADEON(0): Default Engine Clock: 350000
    (II) RADEON(0): Default Memory Clock: 333000
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1200000
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
    (II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
    (II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
    (II) RADEON(0): Maximum Pixel Clock: 400000
    (II) RADEON(0): Reference Clock: 14320
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    (II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.31.0
    (==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
    
    (II) RADEON(0): Will try to use DMA for Xv image transfers
    (II) RADEON(0): Generation 2 PCI interface, using max accessible memory
    (II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
    (--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
    (II) RADEON(0): Color tiling enabled by default
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) RADEON(0): PLL parameters: rf=1432 rd=12 min=70000 max=120000; xclk=40000
    (WW) RADEON(0): LVDS Info:
    XRes: 1280, YRes: 800, DotClock: 71450
    HBlank: 168, HOverPlus: 48, HSyncWidth: 32
    VBlank: 22, VOverPlus: 3, VSyncWidth: 6
    (II) RADEON(0): Output VGA-0 has no monitor section
    (II) RADEON(0): I2C bus "VGA-0" initialized.
    (II) RADEON(0): Output LVDS has no monitor section
    (II) RADEON(0): I2C bus "LVDS" initialized.
    (II) RADEON(0): Output DVI-0 has no monitor section
    (II) RADEON(0): I2C bus "DVI-0" initialized.
    (II) RADEON(0): Port0:
      XRANDR name: VGA-0
      Connector: VGA
      CRT1: INTERNAL_KLDSCP_DAC1
      DDC reg: 0x7e40
    (II) RADEON(0): Port1:
      XRANDR name: LVDS
      Connector: LVDS
      LCD1: INTERNAL_LVTM1
      DDC reg: 0x7e40
    (II) RADEON(0): Port2:
      XRANDR name: DVI-0
      Connector: DVI-D
      DFP2: INTERNAL_DDI
      DDC reg: 0x7e40
    (II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    finished output detect: 0
    (II) RADEON(0): I2C device "LVDS:ddc2" registered at address 0xA0.
    (II) RADEON(0): EDID for output LVDS
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    finished output detect: 1
    (II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    finished output detect: 2
    finished all detect
    before xf86InitialConfiguration
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): EDID for output VGA-0
    (II) RADEON(0): EDID for output LVDS
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Printing probed modes for output LVDS
    (II) RADEON(0): Modeline "1280x800"x60.0   71.45  1280 1328 1360 1448  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) RADEON(0): Modeline "1280x800"x60.1   70.30  1280 1328 1360 1424  800 803 809 822 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Modeline "1280x720"x59.9   74.50  1280 1344 1472 1664  720 723 728 748 -hsync +vsync (44.8 kHz)
    (II) RADEON(0): Modeline "1152x768"x59.8   71.75  1152 1216 1328 1504  768 771 781 798 -hsync +vsync (47.7 kHz)
    (II) RADEON(0): Modeline "1024x768"x59.9   63.50  1024 1072 1176 1328  768 771 775 798 -hsync +vsync (47.8 kHz)
    (II) RADEON(0): Modeline "800x600"x59.9   38.25  800 832 912 1024  600 603 607 624 -hsync +vsync (37.4 kHz)
    (II) RADEON(0): Modeline "640x480"x59.4   23.75  640 664 720 800  480 483 487 500 -hsync +vsync (29.7 kHz)
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (II) RADEON(0): EDID for output DVI-0
    (II) RADEON(0): Output VGA-0 disconnected
    (II) RADEON(0): Output LVDS connected
    (II) RADEON(0): Output DVI-0 disconnected
    (II) RADEON(0): Using exact sizes for initial modes
    (II) RADEON(0): Output LVDS using initial mode 1280x800
    (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    (==) RADEON(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    (II) Loading /usr/lib/xorg/modules/libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (==) RADEON(0): Using EXA acceleration architecture
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    (II) Loading /usr/lib/xorg/modules/libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 2.5.0
    	ABI class: X.Org Video Driver, version 6.0
    (!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
    (II) UnloadModule: "vesa"
    (II) Unloading /usr/lib/xorg/modules/drivers/vesa_drv.so
    (II) UnloadModule: "fbdev"
    (II) Unloading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    (II) UnloadModule: "fbdevhw"
    (II) Unloading /usr/lib/xorg/modules/linux/libfbdevhw.so
    (--) Depth 24 pixmap format is 32 bpp
    (II) RADEON(0): RADEONScreenInit e0000000 0 0
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): Dynamic Power Management Disabled
    (==) RADEON(0): Using 24 bit depth buffer
    (II) RADEON(0): RADEONInitMemoryMap() : 
    (II) RADEON(0):   mem_size         : 0x10000000
    (II) RADEON(0):   MC_FB_LOCATION   : 0xbfffb000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
    (II) RADEON(0): Depth moves disabled by default
    (II) RADEON(0): Allocating from a screen of 262080 kb
    (II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00640000
    (II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00644000
    (II) RADEON(0): Will use 6400 kb for front buffer at offset 0x00000000
    (II) RADEON(0): Will use 64 kb for PCI GART at offset 0x0fff0000
    (II) RADEON(0): Will use 6400 kb for back buffer at offset 0x00648000
    (II) RADEON(0): Will use 6400 kb for depth buffer at offset 0x00c88000
    (II) RADEON(0): Will use 120832 kb for textures at offset 0x012c8000
    (II) RADEON(0): Will use 122016 kb for X Server offscreen at offset 0x088c8000
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) RADEON(0): [drm] framebuffer handle = 0xe0000000
    (II) RADEON(0): [drm] added 1 reserved context for kernel
    (II) RADEON(0): X context handle = 0x1
    (II) RADEON(0): [drm] installed DRM signal handler
    (II) RADEON(0): [pci] 32768 kB allocated with handle 0x0630c900
    (II) RADEON(0): [pci] ring handle = 0x2b800000
    (II) RADEON(0): [pci] Ring mapped at 0x7feb0a0d2000
    (II) RADEON(0): [pci] Ring contents 0x00000000
    (II) RADEON(0): [pci] ring read ptr handle = 0x1b7ff000
    (II) RADEON(0): [pci] Ring read ptr mapped at 0x7feb0a208000
    (II) RADEON(0): [pci] Ring read ptr contents 0x00000000
    (II) RADEON(0): [pci] vertex/indirect buffers handle = 0x2b801000
    (II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0x7feaf51a8000
    (II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
    (II) RADEON(0): [pci] GART texture map handle = 0x2b802000
    (II) RADEON(0): [pci] GART Texture map mapped at 0x7feaf3528000
    (II) RADEON(0): [drm] register handle = 0x2fff8000
    (II) RADEON(0): [dri] Visual configs initialized
    (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
    (II) RADEON(0):   MC_FB_LOCATION   : 0xbfffb000 0xbfffb000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x003f0000
    (==) RADEON(0): Backing store disabled
    (II) RADEON(0): [DRI] installation complete
    (II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
    (II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
    (II) RADEON(0): [drm] dma control initialized, using IRQ 18
    (II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
    (WW) RADEON(0): DRI init changed memory map, adjusting ...
    (WW) RADEON(0):   MC_FB_LOCATION  was: 0xbfffb000 is: 0xbfffb000
    (WW) RADEON(0):   MC_AGP_LOCATION was: 0x003f0000 is: 0x00000000
    (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
    (II) RADEON(0):   MC_FB_LOCATION   : 0xbfffb000 0xbfffb000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x00000000
    (II) RADEON(0): Direct rendering enabled
    (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
    (II) RADEON(0): Setting EXA maxPitchBytes
    (II) RADEON(0): num quad-pipes is 1
    (II) EXA(0): Offscreen pixmap area of 124944384 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (II)         UploadToScreen
    (II)         DownloadFromScreen
    (II) RADEON(0): Acceleration enabled
    (==) RADEON(0): DPMS enabled
    (==) RADEON(0): Silken mouse enabled
    (II) RADEON(0): Set up textured video
    Output CRT1 disable success
    Output LCD1 disable success
    Output DFP2 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Blank CRTC 1 success
    Disable CRTC 1 success
    Output LCD1 disable success
    Blank CRTC 0 success
    Disable CRTC 0 success
    Mode 1280x800 - 1448 822 10
    (II) RADEON(0): RADEONRestoreMemMapRegisters() : 
    (II) RADEON(0):   MC_FB_LOCATION   : 0xbfffb000 0xbfffb000
    (II) RADEON(0):   MC_AGP_LOCATION  : 0x00000000
    ffreq: 71450.000000
    best_freq: 71450
    best_feedback_div: 159.6
    best_ref_div: 2
    best_post_div: 16
    (II) RADEON(0): crtc(0) Clock: mode 71450, PLL 71450
    (II) RADEON(0): crtc(0) PLL  : refdiv 2, fbdiv 0x9F(159), fracfbdiv 6, pdiv 16
    Set CRTC 0 PLL success
    Set CRTC Timing success
    Set CRTC 0 Overscan success
    Not using RMX
    scaler 0 setup success
    Set CRTC 0 Source success
    crtc 0 YUV disable setup success
    Output digital setup success
    Output LCD1 enable success
    Enable CRTC 0 success
    Unblank CRTC 0 success
    Output CRT1 disable success
    Output DFP2 disable success
    Blank CRTC 1 success
    Disable CRTC 1 success
    (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (--) RandR disabled
    (II) Initializing built-in extension Generic Event Extension
    (II) Initializing built-in extension SHAPE
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension BIG-REQUESTS
    (II) Initializing built-in extension SYNC
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-MISC
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    record: RECORD extension enabled at configure time.
    record: This extension is known to be broken, disabling extension now..
    record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
    (II) AIGLX: Screen 0 is not DRI2 capable
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:01:05.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:01:05.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_make_current_read
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/dri/r300_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) RADEON(0): Setting screen physical size to 338 x 211
    (II) XKB: generating xkmfile /tmp/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
    (II) config/udev: Adding input device "Video Bus" (/dev/input/event5)
    (II) LoadModule: "evdev"
    (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    	compiled for 1.7.3.902, module version = 2.3.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 7.0
    (**) "Video Bus": always reports core events
    (**) "Video Bus": Device: "/dev/input/event5"
    (II) "Video Bus": Found keys
    (II) "Video Bus": Configuring as keyboard
    (II) XINPUT: Adding extended input device ""Video Bus"" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "us"
    (II) config/udev: Adding input device "Power Button" (/dev/input/event1)
    (**) "Power Button": always reports core events
    (**) "Power Button": Device: "/dev/input/event1"
    (II) "Power Button": Found keys
    (II) "Power Button": Configuring as keyboard
    (II) XINPUT: Adding extended input device ""Power Button"" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "us"
    (II) config/udev: Adding input device "Sleep Button" (/dev/input/event2)
    (**) "Sleep Button": always reports core events
    (**) "Sleep Button": Device: "/dev/input/event2"
    (II) "Sleep Button": Found keys
    (II) "Sleep Button": Configuring as keyboard
    (II) XINPUT: Adding extended input device ""Sleep Button"" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "us"
    (II) config/udev: Adding input device "N-Trig Pen" (/dev/input/event6)
    (II) LoadModule: "wacom"
    (II) Loading /usr/lib/xorg/modules/input/wacom_drv.so
    (II) Module wacom: vendor="X.Org Foundation"
    	compiled for 1.7.5, module version = 0.10.4
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 7.0
    (**) Option "Device" "/dev/input/event6"
    (II) "N-Trig Pen": type not specified, assuming 'stylus'.
    (II) "N-Trig Pen": other types will be automatically added.
    (**) "N-Trig Pen": always reports core events
    (II) "N-Trig Pen": hotplugging dependent devices.
    (**) Option "Device" "/dev/input/event6"
    (**) "N-Trig Pen" eraser: always reports core events
    (II) XINPUT: Adding extended input device ""N-Trig Pen" eraser" (type: ERASER)
    (--) "N-Trig Pen" eraser: using pressure threshold of 15 for button 1
    (--) "N-Trig Pen" eraser: Wacom USB TabletPC tablet speed=38400 maxX=9600 maxY=7200 maxZ=256 resX=934 resY=1122  tilt=disabled
    (--) "N-Trig Pen" eraser: top X=0 top Y=0 bottom X=9600 bottom Y=7200 resol X=934 resol Y=1122
    (II) "N-Trig Pen": hotplugging completed.
    (II) XINPUT: Adding extended input device ""N-Trig Pen"" (type: STYLUS)
    (--) "N-Trig Pen": top X=0 top Y=0 bottom X=9600 bottom Y=7200 resol X=934 resol Y=1122
    (II) config/udev: Adding input device "N-Trig Touchscreen" (/dev/input/event7)
    (**) "N-Trig Touchscreen": always reports core events
    (**) "N-Trig Touchscreen": Device: "/dev/input/event7"
    (II) "N-Trig Touchscreen": Found 1 mouse buttons
    (II) "N-Trig Touchscreen": Found absolute axes
    (II) "N-Trig Touchscreen": Found x and y absolute axes
    (II) "N-Trig Touchscreen": Found absolute touchpad.
    (II) "N-Trig Touchscreen": Configuring as touchpad
    (**) "N-Trig Touchscreen": YAxisMapping: buttons 4 and 5
    (**) "N-Trig Touchscreen": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device ""N-Trig Touchscreen"" (type: TOUCHPAD)
    (**) "N-Trig Touchscreen": (accel) keeping acceleration scheme 1
    (**) "N-Trig Touchscreen": (accel) acceleration profile 0
    (II) "N-Trig Touchscreen": initialized for absolute axes.
    (II) config/udev: Adding input device "N-Trig Touchscreen" (/dev/input/mouse2)
    (**) "N-Trig Touchscreen": always reports core events
    (**) "N-Trig Touchscreen": Device: "/dev/input/mouse2"
    (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
    (II) UnloadModule: "evdev"
    (EE) PreInit returned NULL for ""N-Trig Touchscreen""
    (II) config/udev: Adding input device "N-Trig Pen" (/dev/input/event8)
    (**) Option "Device" "/dev/input/event8"
    (II) "N-Trig Pen": type not specified, assuming 'stylus'.
    (II) "N-Trig Pen": other types will be automatically added.
    (**) "N-Trig Pen": always reports core events
    (II) "N-Trig Pen": hotplugging dependent devices.
    (**) Option "Device" "/dev/input/event8"
    (**) "N-Trig Pen" eraser: always reports core events
    (II) XINPUT: Adding extended input device ""N-Trig Pen" eraser" (type: ERASER)
    (--) "N-Trig Pen" eraser: using pressure threshold of 15 for button 1
    (--) "N-Trig Pen" eraser: Wacom USB TabletPC tablet speed=38400 maxX=9600 maxY=7200 maxZ=256 resX=934 resY=1122  tilt=disabled
    (--) "N-Trig Pen" eraser: top X=0 top Y=0 bottom X=9600 bottom Y=7200 resol X=934 resol Y=1122
    (II) "N-Trig Pen": hotplugging completed.
    (II) XINPUT: Adding extended input device ""N-Trig Pen"" (type: STYLUS)
    (--) "N-Trig Pen": top X=0 top Y=0 bottom X=9600 bottom Y=7200 resol X=934 resol Y=1122
    (II) config/udev: Adding input device "N-Trig Touchscreen" (/dev/input/event9)
    (**) "N-Trig Touchscreen": always reports core events
    (**) "N-Trig Touchscreen": Device: "/dev/input/event9"
    (II) "N-Trig Touchscreen": Found 1 mouse buttons
    (II) "N-Trig Touchscreen": Found absolute axes
    (II) "N-Trig Touchscreen": Found x and y absolute axes
    (II) "N-Trig Touchscreen": Found absolute touchpad.
    (II) "N-Trig Touchscreen": Configuring as touchpad
    (**) "N-Trig Touchscreen": YAxisMapping: buttons 4 and 5
    (**) "N-Trig Touchscreen": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device ""N-Trig Touchscreen"" (type: TOUCHPAD)
    (**) "N-Trig Touchscreen": (accel) keeping acceleration scheme 1
    (**) "N-Trig Touchscreen": (accel) acceleration profile 0
    (II) "N-Trig Touchscreen": initialized for absolute axes.
    (II) config/udev: Adding input device "N-Trig Touchscreen" (/dev/input/mouse4)
    (**) "N-Trig Touchscreen": always reports core events
    (**) "N-Trig Touchscreen": Device: "/dev/input/mouse4"
    (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
    (II) UnloadModule: "evdev"
    (EE) PreInit returned NULL for ""N-Trig Touchscreen""
    (II) config/udev: Adding input device "AT Translated Set 2 keyboard" (/dev/input/event4)
    (**) "AT Translated Set 2 keyboard": always reports core events
    (**) "AT Translated Set 2 keyboard": Device: "/dev/input/event4"
    (II) "AT Translated Set 2 keyboard": Found keys
    (II) "AT Translated Set 2 keyboard": Configuring as keyboard
    (II) XINPUT: Adding extended input device ""AT Translated Set 2 keyboard"" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "us"
    (II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/event14)
    (**) "PS/2 Generic Mouse": always reports core events
    (**) "PS/2 Generic Mouse": Device: "/dev/input/event14"
    (II) "PS/2 Generic Mouse": Found 3 mouse buttons
    (II) "PS/2 Generic Mouse": Found relative axes
    (II) "PS/2 Generic Mouse": Found x and y relative axes
    (II) "PS/2 Generic Mouse": Configuring as mouse
    (**) "PS/2 Generic Mouse": YAxisMapping: buttons 4 and 5
    (**) "PS/2 Generic Mouse": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device ""PS/2 Generic Mouse"" (type: MOUSE)
    (**) "PS/2 Generic Mouse": (accel) keeping acceleration scheme 1
    (**) "PS/2 Generic Mouse": (accel) acceleration profile 0
    (II) "PS/2 Generic Mouse": initialized for relative axes.
    (II) config/udev: Adding input device "PS/2 Generic Mouse" (/dev/input/mouse5)
    (**) "PS/2 Generic Mouse": always reports core events
    (**) "PS/2 Generic Mouse": Device: "/dev/input/mouse5"
    (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
    (II) UnloadModule: "evdev"
    (EE) PreInit returned NULL for ""PS/2 Generic Mouse""
    (II) config/udev: Adding input device "Dell WMI hotkeys" (/dev/input/event10)
    (**) "Dell WMI hotkeys": always reports core events
    (**) "Dell WMI hotkeys": Device: "/dev/input/event10"
    (II) "Dell WMI hotkeys": Found keys
    (II) "Dell WMI hotkeys": Configuring as keyboard
    (II) XINPUT: Adding extended input device ""Dell WMI hotkeys"" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Option "xkb_layout" "us"
    (II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/event3)
    (**) "Macintosh mouse button emulation": always reports core events
    (**) "Macintosh mouse button emulation": Device: "/dev/input/event3"
    (II) "Macintosh mouse button emulation": Found 3 mouse buttons
    (II) "Macintosh mouse button emulation": Found relative axes
    (II) "Macintosh mouse button emulation": Found x and y relative axes
    (II) "Macintosh mouse button emulation": Configuring as mouse
    (**) "Macintosh mouse button emulation": YAxisMapping: buttons 4 and 5
    (**) "Macintosh mouse button emulation": EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) XINPUT: Adding extended input device ""Macintosh mouse button emulation"" (type: MOUSE)
    (**) "Macintosh mouse button emulation": (accel) keeping acceleration scheme 1
    (**) "Macintosh mouse button emulation": (accel) acceleration profile 0
    (II) "Macintosh mouse button emulation": initialized for relative axes.
    (II) config/udev: Adding input device "Macintosh mouse button emulation" (/dev/input/mouse0)
    (**) "Macintosh mouse button emulation": always reports core events
    (**) "Macintosh mouse button emulation": Device: "/dev/input/mouse0"
    (EE) ioctl EVIOCGNAME failed: Inappropriate ioctl for device
    (II) UnloadModule: "evdev"
    (EE) PreInit returned NULL for ""Macintosh mouse button emulation""
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x800"x0.0   71.45  1280 1328 1360 1448  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) RADEON(0): Modeline "1280x800"x0.0   70.30  1280 1328 1360 1424  800 803 809 822 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x800"x0.0   71.45  1280 1328 1360 1448  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) RADEON(0): Modeline "1280x800"x0.0   70.30  1280 1328 1360 1424  800 803 809 822 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    Dac detection success
    (II) RADEON(0): Output: VGA-0, Detected Monitor Type: 0
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Printing DDC gathered Modelines:
    (II) RADEON(0): Modeline "1280x800"x0.0   71.45  1280 1328 1360 1448  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) RADEON(0): Modeline "1280x800"x0.0   70.30  1280 1328 1360 1424  800 803 809 822 -hsync -vsync (49.4 kHz)
    (II) RADEON(0): Output: LVDS, Detected Monitor Type: 2
    (II) RADEON(0): EDID data from the display on output: LVDS ----------------------
    (II) RADEON(0): Manufacturer: AUO  Model: 4214  Serial#: 0
    (II) RADEON(0): Year: 2007  Week: 1
    (II) RADEON(0): EDID Version: 1.3
    (II) RADEON(0): Digital Display Input
    (II) RADEON(0): Max Image Size [cm]: horiz.: 26  vert.: 16
    (II) RADEON(0): Gamma: 2.20
    (II) RADEON(0): No DPMS capabilities specified
    (II) RADEON(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4 
    (II) RADEON(0): First detailed timing is preferred mode
    (II) RADEON(0): redX: 0.580 redY: 0.340   greenX: 0.330 greenY: 0.575
    (II) RADEON(0): blueX: 0.155 blueY: 0.135   whiteX: 0.313 whiteY: 0.329
    (II) RADEON(0): Manufacturer's mask: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 71.5 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1448 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0): Supported detailed timing:
    (II) RADEON(0): clock: 70.3 MHz   Image Size:  261 x 163 mm
    (II) RADEON(0): h_active: 1280  h_sync: 1328  h_sync_end 1360 h_blank_end 1424 h_border: 0
    (II) RADEON(0): v_active: 800  v_sync: 803  v_sync_end 809 v_blanking: 822 v_border: 0
    (II) RADEON(0):  KX774B121EW4
    (II) RADEON(0):  	4`��
    (II) RADEON(0): EDID (in hex):
    (II) RADEON(0): 	00ffffffffffff0006af144200000000
    (II) RADEON(0): 	01110103801a10780a89e59457549327
    (II) RADEON(0): 	22505400000001010101010101010101
    (II) RADEON(0): 	010101010101e91b00a8502016303020
    (II) RADEON(0): 	360005a310000019761b009050201630
    (II) RADEON(0): 	3020360005a310000000000000fe004b
    (II) RADEON(0): 	583737340242313231455734000000fe
    (II) RADEON(0): 	00090f151a346084ff01010a2020001b
    (II) RADEON(0): EDID vendor "AUO", prod id 16916
    (II) RADEON(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
    (II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
    (WW) "N-Trig Touchscreen": unable to handle keycode 333
    Man, I would *love* to see multi-touch for painting / navigating in Krita. That would be mindblowing.
    The 333 message has always been there at least with the newer firmware. I forgot what it was for (I looked it up once). I would recommend starting with xorg.conf instead of .fdi because hal is deprecated and has been mostly removed in Ubuntu (but Kubuntu still has it because of KDE apps).

    As for building xf86-input-wacom, I did :
    Code:
    sudo apt-get build-deb xf86-input-wacom
    instead of using the steps in post 1. It should cover everything you need before compiling the source. You can then either download the source from the repository or build it from git. I used the repository version and patched it.

    I have not been able to get the multi-touch working properly in KDE yet. I can get the multiple pointers, but they do not run any of the widget apps properly (no pinching, rotation, or multiple fingers in blackboard). I am current rewriting my driver that I have been using in Gentoo and have been able to get the single finger right-click and two-finger scrolling to work now. I need to update the configuration app so that you can turn things on and off and work on multi-touch. I also have to make some changes to the driver so that it will sort the multi-touch data correctly from the kernel module since the firmware does not report the ID's properly. I also needed to make some changes to the kernel module so that the multi-touch data is reported correctly based on the information in the kernel docs.

    I am hoping to get this all working before Lucid comes out. I also want to test this against the four-finger touch firmware to see if I can get them working also. I am not for sure if I need to incorporate Carlos Garnacho's changes or not to activate the multi-touch in 2.59.

  2. #632
    Join Date
    Oct 2009
    Beans
    2

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    finally some success kernel 2.6.31-20-generic with win7 firmware

    using 1)a precompiled hid-ntrig.ko (2-16-10)

    used symlinks versus bypaths
    originally used the incorrect xorg.conf therefore tried the fdi mentioned in post 621 reread n realized i used the first not the second (multitouch xorg) using the second xorg i now have touch which also clicks where i touch however the pen does not work well it goes to where i point (it does not click) however it also doesn't follow the pen on the screen nor does the button on the pen work. multitouch does not appear to work as well considering if i touch one point on the desktop then click another it attempts to drag and create a box and jumps around like mad as if its cycling between the two.

    what work:
    single touch with click upon touch
    what doesn't:
    anything else

    any more help would be greatly appreciated:
    furthermore i thought i should add, there is noting that with win7 beta drivers multitouch was expanded beyond two points, and re limited upon final release, is anything being done with this?

    any help for further progression i can do to test possible ideas would be wonderful. But seriously THANK YOU on finally getting at least single touch to work, its my primary concern.

  3. #633
    Join Date
    Jan 2007
    Location
    Here.
    Beans
    418
    Distro
    Kubuntu Development Release

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Quote Originally Posted by Ayuthia View Post
    I am current rewriting my driver that I have been using in Gentoo and have been able to get the single finger right-click and two-finger scrolling to work now. I need to update the configuration app so that you can turn things on and off and work on multi-touch. I also have to make some changes to the driver so that it will sort the multi-touch data correctly from the kernel module since the firmware does not report the ID's properly. I also needed to make some changes to the kernel module so that the multi-touch data is reported correctly based on the information in the kernel docs.

    I am hoping to get this all working before Lucid comes out. I also want to test this against the four-finger touch firmware to see if I can get them working also.
    Dude, did I mention that you're my personal open-source hero?

    By the way I ran through setup 3 in post 1 (which I missed before). For xorg.conf I just used the attached one without the usb-by paths.

    Works:
    Touch now seems properly calibrated
    Touch-click works. Awesome! It's amazing how much better things work when you follow the instructions.
    Stylus click and right click
    Stylus pressure (in GTK apps only)

    Doesn't work / not sure how to test:
    Multitouch (how to test?)
    Top (middle mouse button? eraser?) button on stylus freezes cursor until released

    By the way, would it be of any use to post the hid-ntrig.ko I compiled (2.6.32 AMD64)?
    Last edited by Ubuntiac; February 25th, 2010 at 10:31 AM. Reason: World peace.
    Facebook, Apple, Google, corrupt governments, the ISP's and Telco's
    can be beaten at their own game by free and open source software.
    Here's how. (Extra credit)

  4. #634
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Hi Ubuntiac,

    I was wondering about that, but figured you'd get to it.

    Great, working!

    For "eraser"(?) remove the comments from the eraser section in the xorg.conf and the eraser line in "ServerLayout" and reboot and see if it works.

    To answer your other question, right now xf86-input-wacom doesn't have wacomcpl. So you'll have to set up a script of xsetwacom commands to run when the system starts if you need to configure things, like touch relative or absolute, or on and off.

    They also rebuilt xsetwacom commands for xf86-input-wacom. So they may be a little different. See what "man xf86-input-wacom" says, if anything. You could also see if there is a "man xsetwacom". I don't think there is. Experimentation may be needed!

  5. #635
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Hi everyone,

    I'm not for sure how much of the gestures (multi-touch) stuff has made it into the main branch of xf86-input-wacom. I know some of it is still in Chris Bagwell's Bamboo branch. He's been ironing out the kinks and Peter has been importing it into the Master branch when ready. It looks like Chris has it mostly figured out now. That's why I have you cloning the Master git branch, rather than downloading a point release tar (like 0.10.4). You'll get the latest official updates as soon as available. And a lot of other general fixes too. Not to mention manual updates.


    Hi ndan,

    It sounds like you may not have installed the new udev rules in 3 a). Could that be it?

  6. #636
    Join Date
    Feb 2010
    Beans
    4

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Hi everyone,

    I have the patch from Rafi (02-16) for the ntrig driver and the 8.5-10 for the wacom with the patch already in the tree.

    I am running 2.6.31-20 32 bit.

    When the screen is in normal landscape, everything is fine. However, when I rotate, the Pen works fine, but the touch jumps to a mirror location after I release it.

    Here is my xorg; rules;

    xorg.conf
    Code:
     
    # xorg.conf (X.Org X Window System server configuration file)
    Section "InputDevice"
     Identifier "stylus"
     Driver  "wacom"
     Option  "Device" "/dev/input/n-trig"
     Option  "Type"  "stylus"
     Option  "USB"  "on"
     Option  "Button2" "3" # make stylus button R mouse click
     Option  "TopX"  "0"
     Option  "TopY"  "0"
     Option  "BottomX" "9600"
     Option  "BottomY" "7200"
    EndSection
    Section "InputDevice"
     Identifier "touch"
     Driver  "wacom"
     Option  "Device" "/dev/input/n-trig-touch"
     Option  "Type"  "touch"
     Option  "USB"  "on"
     Option  "TopX"  "0"
     Option  "TopY"  "0"
     Option  "BottomX" "9600"
     Option  "BottomY" "7200"
    EndSection
    Section "InputDevice"
     Identifier "mttouch"
     Driver  "wacom"
     Option  "Device" "/dev/input/n-trig-mttouch"
     Option  "Type"  "touch"
     Option  "USB"  "on"
     Option  "TopX"  "0"
     Option  "TopY"  "0"
     Option  "BottomX" "9600"
     Option  "BottomY" "7200"
    EndSection
    Section "Device"
     Identifier "Configured Video Device"
    EndSection
    Section "Monitor"
     Identifier "Configured Monitor"
    EndSection
    Section "Screen"
     Identifier "Default Screen"
     Monitor  "Configured Monitor"
     Device  "Configured Video Device"
    EndSection
    Section "ServerLayout"
     Identifier "X.org Configured"
    # Identifier "Default Layout"
    # Screen  "Default Screen"
     InputDevice "stylus" "SendCoreEvents"
    #   Remove the comment below if you have an eraser.
    # InputDevice "eraser" "SendCoreEvents"
     InputDevice "touch"  "SendCoreEvents"
     InputDevice "mttouch" "SendCoreEvents"
    EndSection
    #   Developed with Ayuthia (using Rafi Rubin's Wacom sections as a starting point).
    rules:
    Code:
    # udev rules for n-trig tablets.
    #
    # These rules were compiled for the Ubuntu/Debian GNU/Linux distribution, but others may,
    # and indeed are encouraged to, use them also.
    #
    # Should you do so, PLEASE CO-ORDINATE ANY CHANGES OR ADDITIONS of new devices with ????
    # so that we can try to present users with a standard set of device nodes which they can
    # rely on across the board.
    KERNEL!="event[0-9]*", GOTO="n-trig_end"
    # The ID_PATH variable is set by the "path_id" script in an earlier rule file.
    ATTRS{name}=="N-Trig Touchscreen", ENV{ID_PATH}=="?*", SYMLINK="input/by-path/$env{ID_PATH}-n-trig-touch"
    ATTRS{name}=="N-Trig MultiTouch", ENV{ID_PATH}=="?*", SYMLINK="input/by-path/$env{ID_PATH}-n-trig-mttouch"
    ATTRS{name}=="N-Trig Pen", ENV{ID_PATH}=="?*", SYMLINK="input/by-path/$env{ID_PATH}-n-trig"
    # To mirror linuxwacom, we keep the input/n-trig link as the generic stylus device.
    ATTRS{name}=="N-Trig Touchscreen", SUBSYSTEM=="input", SYMLINK+="input/n-trig-touch"
    ATTRS{name}=="N-Trig MultiTouch", SUBSYSTEM=="input", SYMLINK+="input/n-trig-mttouch"
    ATTRS{name}=="N-Trig Pen", SUBSYSTEM=="input", SYMLINK+="input/n-trig"
    # Check and repossess the device if a module other than the n-trig/linuxwacom one is
    # already bound to it.
    ATTRS{idVendor}=="1b96", ACTION=="add", RUN+="check_driver ntrig $devpath $env{ID_BUS}"
    LABEL="n-trig_end"
    Any ideas?

  7. #637
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Hi jkstuff1,

    Welcome to Ubuntu forums!

    Nice job. It looks like you have a HP TX2z. Do you know your firmware?

    We can look at your "xinput --list", Xorg.0.log (in /var/log), and lshal (lshal>jkstuff1_lshal.txt).

    That said it sounds like a known bug in linuxwacom that I reported: see Tracker ID: 2938348 - http://sourceforge.net/tracker/?func...96&atid=525124 Especially if the pointer comes back to your finger as soon as you place it back on the screen. We may have to wait for 0.8.5-11, due out in 2-3 weeks, for a fix.

    You could also try the slightly simplified rule in the HOW TO on the front page where Ayuthia explicitly linked the linuxwacom driver to the inputs.

    Actually I'm interested in the fact that that version of the rules seems to be working well for you!

    Hope this helps.

  8. #638
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Hi Ubuntiac,
    Multitouch (how to test?)
    Right now I think there is pinch zoom, two finger scroll (horizontal and vertical), and maybe two finger tap.


    Hi everyone,

    Since the new udev rules seem to be working I'd appreciate if some folks using the original symlink rules for the multiplexed (single stream) hid-ntrig.ko (pre-Rafi's 2-5-10 one), in Jaunty or Karmic, would test the following udev rules. These rules should be the equivalent of the original one (in 3 b)), but hopefully perform better. Avoiding things like the Synaptic touchpad driver grabbing the N-trig digitizer. It would also bring the original multiplex rule more in line with the new rules for the separated streams.

    You'd keep your original symlink xorg.conf and follow the instructions in 3 and 3 a)on the N-trig HOW TO, so that you also install check_driver.
    Code:
    # udev rules for n-trig tablets (hid-ntrig.ko earlier than 2-5-10 i.e. multiplexed).
    #
    # These rules were compiled for the Ubuntu/Debian GNU/Linux distribution, but others may,
    # and indeed are encouraged to, use them also.
    #
    # Should you do so, PLEASE CO-ORDINATE ANY CHANGES OR ADDITIONS of new devices with ????
    # so that we can try to present users with a standard set of device nodes which they can
    # rely on across the board.
    
    # To mirror linuxwacom, we keep the input/n-trig link as the generic stylus device.
    KERNEL=="event*", ATTRS{idVendor}=="1b96", ATTRS{idProduct}=="0001", ENV{x11_driver}="wacom", SYMLINK="input/n-trig"
    
    # Check and repossess the device if a module other than the n-trig one is already bound
    # to it.
    ATTRS{idVendor}=="1b96", ACTION=="add", RUN+="check_driver ntrig $devpath $env{ID_BUS}"
    If it works out we can change the rule in 3 b) to this updated version. And in the process simplify the HOW TO, something we all want!

  9. #639
    Join Date
    Jan 2007
    Location
    Here.
    Beans
    418
    Distro
    Kubuntu Development Release

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    Quote Originally Posted by Favux View Post
    Right now I think there is pinch zoom, two finger scroll (horizontal and vertical), and maybe two finger tap.
    In what application(s)?
    I'm not seeing any different behavior using two fingers in Firefox / Konqueror for scroll. Thus far touch seem to be working just like a 1 button mouse.

    Oddly, when I go to system settings -> Keyboard and mouse -> Touchpad in Kubuntu it says "Touchpad name: device not found" and all the options are greyed out (including 2 finger scroll) despite having both general touch and the touchpad working...
    Facebook, Apple, Google, corrupt governments, the ISP's and Telco's
    can be beaten at their own game by free and open source software.
    Here's how. (Extra credit)

  10. #640
    Join Date
    Nov 2008
    Beans
    9,635
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: HOW TO: Set up the HP TX2z and Dell XT & XT2 (N-trig digitizer) in Ubuntu

    It may be that Kubuntu 10.4 doesn't completely support xf86-input-wacom yet, Ubuntu added it about 3 weeks ago. Or xf86-input-wacom doesn't have as much gesture support in it as I thought. If so that should be coming shortly.

    By the way it would be a big help if you posted a tar of your hid-ntirg.ko!

Page 64 of 169 FirstFirst ... 1454626364656674114164 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •