Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: Ethernet not functioning

  1. #1
    Join Date
    Feb 2006
    Beans
    8

    Ethernet not functioning

    So I installed UNR on my brand new (fully hardware functional) HP Mini 110 1030NR. Everything works fine, including the wireless, but the ethenet doesn't work. Seeing as I have a wired network it would be nice to have ethernet working.

    Any ideas?

  2. #2
    Join Date
    Mar 2006
    Location
    Williams Lake
    Beans
    Hidden!
    Distro
    Ubuntu Development Release

    Re: Ethernet not functioning

    Could you open an Applications-->Accessories-->Terminal and type:

    Code:
    sudo lshw -C network
    and paste the output in your next post.

  3. #3
    Join Date
    Jul 2009
    Beans
    14
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Ethernet not functioning

    The original poster hasn't responded, but I will. I also have an HP Mini 110 with an ethernet port that does not work under UNR 9.04.

    As I mentioned in thread 1201415, the ethernet port does work for HP Mini Mi, HP's flavor of Ubuntu. It uses the atl1e driver (ver. 1.0.0.6, for kernel 2.6.24-22-lpia). However, simply modprobe'ing that module in UNR 9.04 did not work. Nor did adding it to /etc/modules and rebooting. Under UNR 9.04, I'm currently running kernel 2.6.13-28-generic and version 1.0.0.7-NAPI of the atl1e module.

    The output of "lshw -C network" is:

    Code:
      *-network               
           description: Wireless interface
           product: BCM4312 802.11b/g
           vendor: Broadcom Corporation
           physical id: 0
           bus info: pci@0000:01:00.0
           logical name: eth1
           version: 01
           serial: 00:25:56:7b:4e:a0
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
           configuration: broadcast=yes driver=wl0 driverversion=5.10.91.9 ip=172.27.72.43 latency=0 module=wl multicast=yes wireless=IEEE 802.11bg
      *-network UNCLAIMED
           description: Ethernet controller
           product: Attansic Technology Corp.
           vendor: Attansic Technology Corp.
           physical id: 0
           bus info: pci@0000:02:00.0
           version: c0
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress vpd bus_master cap_list
           configuration: latency=0
      *-network DISABLED
           description: Ethernet interface
           physical id: 1
           logical name: pan0
           serial: d2:11:b7:98:df:4a
           capabilities: ethernet physical
           configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
    I can get other information (lspci, modinfo) for both the non-functioning UNR 9.04 or the functioning HP Mini Mi if needed.

  4. #4
    Join Date
    Jul 2009
    Beans
    14
    Distro
    Ubuntu 10.04 Lucid Lynx

    Thumbs down Re: Ethernet not functioning

    One (and only one) bump.

  5. #5
    Join Date
    Feb 2009
    Location
    Brooklyn, NY, USA
    Beans
    3
    Distro
    Ubuntu 9.04 Jaunty Jackalope

    Re: Ethernet not functioning

    I also have a new HP mini 110 1030NR running Ubuntu 9.04 Netbook Remix and all the updates and it also doesn't have functional ethernet. Wifi works fine, sounds just like the previous posters' problem. Here's some requested info:

    Code:
    root@viageirinho:~ > sudo lshw -C network
      *-network               
           description: Wireless interface
           product: BCM4312 802.11b/g
           vendor: Broadcom Corporation
           physical id: 0
           bus info: pci@0000:01:00.0
           logical name: eth0
           version: 01
           serial: 00:25:56:7e:35:3a
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
           configuration: broadcast=yes driver=wl0 driverversion=5.10.91.9 ip=10.4.0.184 latency=0 module=wl multicast=yes wireless=IEEE 802.11bg
      *-network UNCLAIMED
           description: Ethernet controller
           product: Attansic Technology Corp.
           vendor: Attansic Technology Corp.
           physical id: 0
           bus info: pci@0000:02:00.0
           version: c0
           width: 64 bits
           clock: 33MHz
           capabilities: pm msi pciexpress vpd bus_master cap_list
           configuration: latency=0
      *-network DISABLED
           description: Ethernet interface
           physical id: 1
           logical name: pan0
           serial: 06:b1:3c:f8:73:5a
           capabilities: ethernet physical
           configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes

  6. #6
    Join Date
    May 2009
    Beans
    96
    Distro
    Ubuntu Karmic Koala (testing)

    Re: Ethernet not functioning

    My Mini 110 ethernet doesn't work, either, i can't copy/paste, because i don't have wireless connection here and i'm using another PC.

  7. #7
    Join Date
    Oct 2008
    Location
    Chicago
    Beans
    148
    Distro
    Ubuntu UNR

    Re: Ethernet not functioning

    Same as the guys above me, ethernet is not working.

    phil@phil-netbook:~$ sudo lshw -C network
    *-network
    description: Wireless interface
    product: BCM4312 802.11b/g
    vendor: Broadcom Corporation
    physical id: 0
    bus info: pci@0000:01:00.0
    logical name: eth0
    version: 01
    serial: 00:26:5e:18:49:4b
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless
    configuration: broadcast=yes driver=wl0 driverversion=5.10.91.9 ip=192.168.1.100 latency=0 module=wl multicast=yes wireless=IEEE 802.11bg
    *-network UNCLAIMED
    description: Ethernet controller
    product: Attansic Technology Corp.
    vendor: Attansic Technology Corp.
    physical id: 0
    bus info: pci@0000:02:00.0
    version: c0
    width: 64 bits
    clock: 33MHz
    capabilities: pm msi pciexpress vpd bus_master cap_list
    configuration: latency=0
    *-network DISABLED
    description: Ethernet interface
    physical id: 1
    logical name: pan0
    serial: d6:fc:15:ec:d5:db
    capabilities: ethernet physical
    configuration: broadcast=yes driver=bridge driverversion=2.3 firmware=N/A link=yes multicast=yes
    HP Mini 110 - UNR 9.10/Jolicloud Alpha Tester
    Lenovo Y510 - Windows 7/Linux Mint Gloria
    www.pcmuze.com - Blog
    www.Clevermodels.net - High Res Paper Models.

  8. #8
    Join Date
    Jul 2009
    Beans
    14
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: Ethernet not functioning -- The fix is in (sort of)

    A (recent?) lead from the hardware support pages references this solution which seems to work for me. It does require compiling the driver. I'll reproduce those instructions with a few updates/modifications here:

    Retrieve AR81Family-linux-v1.0.0.10.tar.gz from http://partner.atheros.com/Drivers.aspx. You'll find a link to it under the heading "AR81Family Linux Driver". You'll have to accept the Atheros EULA.

    Compile, install, and load the module. From the command line, go to the directory where you saved the package and issue these commands:

    Code:
    tar -xvzf AR81Family-linux-v1.0.0.10.tar.gz
    cd src
    make
    sudo make install
    sudo modprobe atl1e
    Last edited by rtb; August 19th, 2009 at 12:23 AM. Reason: Ought to proofread better.

  9. #9
    Join Date
    Oct 2008
    Location
    Chicago
    Beans
    148
    Distro
    Ubuntu UNR

    Re: Ethernet not functioning -- The fix is in (sort of)

    Quote Originally Posted by rtb View Post
    A (recent?) lead from the hardware support pages references this solution which seems to work for me. It does require compiling the driver. I'll reproduce those instructions with a few updates/modifications here:

    Retrieve AR81Family-linux-v1.0.0.10.tar.gz from http://partner.atheros.com/Drivers.aspx. You'll find a link to it under the heading "AR81Family Linux Driver". You'll have to accept the Atheros EULA.

    Compile, install, and load the module. From the command line, go to the directory where you saved the package and issue these commands:

    Code:
    tar -xvzf AR81Family-linux-v1.0.0.10.tar.gz
    cd src
    make
    sudo make install
    sudo modprobe atl1e



    This fixed it. Awesome!
    HP Mini 110 - UNR 9.10/Jolicloud Alpha Tester
    Lenovo Y510 - Windows 7/Linux Mint Gloria
    www.pcmuze.com - Blog
    www.Clevermodels.net - High Res Paper Models.

  10. #10
    Join Date
    Jul 2009
    Location
    United Kingdom
    Beans
    124
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Ethernet not functioning

    Guys

    Can you help me with this please I have done some research on GOOGLE but could not find any solution for that

    gzip: stdin: decompression OK, trailing garbage ignored
    src/Makefile
    src/Module.symvers
    src/modules.order
    tar: Child returned status 2
    tar: Error exit delayed from previous errors
    Cheers

    pi4r0n

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •