Results 1 to 10 of 10

Thread: BSNL WLL phone

Threaded View

  1. #1
    Join Date
    May 2009
    Location
    Bangalore, India
    Beans
    39
    Distro
    Ubuntu 13.04 Raring Ringtail

    Unhappy BSNL WLL phone

    I am using BSNL WLL phone. On the phone cover the company name is printed as HTC Clarity-IIA. But i installed VIA CBP USB driver. When i installed OpenSolaris,it detected my modem as CDS4. I am using USB to USB cable to connect phone and PC.I cant configure this modem in Ubuntu. please help me with step by step process of configuring.I am new to ubuntu. So please help me. "If possible" mail the steps to ttsdinesh@gmail.com.

    -->I tried the following steps:
    Code:
    lsusb
    the output is:
    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

    -->Again when i pluged-in my modem, i got:

    Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
    Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 002 Device 003: ID 15eb:0001
    Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
    Bus 001 Device 003: ID 046d:c019 Logitech, Inc. Optical Tilt Wheel Mouse
    Bus 001 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub


    Code:
    dmesg |grep usb
    the output is:
    [ 2.815386] usbcore: registered new interface driver usbfs
    [ 2.815427] usbcore: registered new interface driver hub
    [ 2.815502] usbcore: registered new device driver usb
    [ 2.861066] usb usb1: configuration #1 chosen from 1 choice
    [ 3.069279] usb usb2: configuration #1 chosen from 1 choice
    [ 3.180648] usb 1-1: new low speed USB device using uhci_hcd and address 2
    [ 3.277349] usb usb3: configuration #1 chosen from 1 choice
    [ 3.356053] usb 1-1: configuration #1 chosen from 1 choice
    [ 3.468031] usb 2-2: new full speed USB device using uhci_hcd and address 2
    [ 3.484631] usb usb4: configuration #1 chosen from 1 choice
    [ 3.625368] usb 2-2: configuration #1 chosen from 1 choice
    [ 3.704373] usb usb5: configuration #1 chosen from 1 choice
    [ 3.758141] usbcore: registered new interface driver hiddev
    [ 3.777791] usbcore: registered new interface driver usbhid
    [ 3.777796] usbhid: v2.6:USB HID core driver
    [ 3.872080] usb 2-2: USB disconnect, address 2
    [ 4.000066] usb 1-1: USB disconnect, address 2
    [ 4.608036] usb 2-2: new full speed USB device using uhci_hcd and address 3
    [ 4.755442] sdb:<6>usb 2-2: configuration #1 chosen from 1 choice
    [ 5.016031] usb 1-1: new low speed USB device using uhci_hcd and address 3
    [ 5.192047] usb 1-1: configuration #1 chosen from 1 choice
    [ 5.208349] input: Logitech USB Optical Mouse as /devices/pci0000:00/0000:00:10.0/usb1/1-1/1-1:1.0/input/input2
    [ 5.236460] input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-0000:00:10.0-1
    [ 18.008088] usb 2-2: USB disconnect, address 3
    [ 186.692027] usb 2-2: new full speed USB device using uhci_hcd and address 4
    [ 186.854331] usb 2-2: configuration #1 chosen from 1 choice

    Code:
    sudo gedit /etc/udev/rules.d/026_ti_usb_3410.rules
    -->I typed the following codes in a text file

    #TI USB 15eb
    SUBSYSTEM==?usb_device? ACTION==?add? \
    SYSFS{idVendor}==?0001?,SYSFS{idProduct}==?15eb? \
    SYSFS{bNumConfigurations}==?5? \
    SYSFS{bConfigurationValue}==?1? \
    RUN+=?/bin/sh -c ?echo 2 > /sys%p/device/bConfigurationValue??

    -->When i saved & closed the text file,following error appears in terminal:

    I/O error : No such file or directory
    I/O error : No such file or directory

    ** (gedit:5743): WARNING **: Could not write gedit state file: Failed to create file '/root/.gnome2/gedit-2.80IDWU': No such file or directory

    I ignored the error and continued.

    Code:
    sudo gedit /etc/wvdial.conf
    -->I typed the following codes in a text file

    [Dialer bsnl]
    Modem = /dev/ttyUSB0
    Baud = 230400
    Phone = #777
    Init1 = ATZ
    Stupid Mode = 1
    Dial Command = ATDT
    Username = username
    Password = password
    PPPD Options = lock noauth refuse-eap refuse-chap refuse-mschap
    nobsdcomp nodeflate

    -->When i saved & closed the text file,following error appears in terminal:

    ** (gedit:5759): WARNING **: Could not write gedit state file: Failed to create file '/root/.gnome2/gedit-2.K7RIWU': No such file or directory

    I/O error : No such file or directory
    I/O error : No such file or directory

    -->Again ignored the error and continued.

    Code:
    sudo wvdial bsnl
    the output is:

    --> Ignoring malformed input line: "nobsdcomp nodeflate"
    --> WvDial: Internet dialer version 1.60
    --> Cannot open /dev/ttyUSB0: No such file or directory
    --> Cannot open /dev/ttyUSB0: No such file or directory
    --> Cannot open /dev/ttyUSB0: No such file or directory

    Please help me..
    Last edited by ttsdinesh; June 26th, 2009 at 01:43 AM. Reason: Earlier post has insufficient data

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •