So I've spent a ton of time doing searches and reading forums but I can not get my Radeon 9250 to work properly. Xubuntu will boot up and run but my graphics card will not function properly. It has a fairly good resolution (1280x1024) but the refresh rates and sync rates are off causing my Samsung SyncMaster monitor to reset the display.

I have tried to get all different drivers to work from the open source to the propiertary ATI drivers. I wish I could give up and buy an Nvidia card but I simply do not have the money.

My computer is a Sony RS 410 intel integrated graphics ( 82845G[Brookkdale-G]/GE) and a Radeon 9250 (RV280) installed in an old style pci slot. The set up works get with windows(which doesnt say much for a linux operating system) and I would like to get both working properly but mainly the Radeon 9250. The intel card works perfectly on the second monitor when it is the only one plugged in.

My default xorg.conf file (and after I run dkpg-reconfigure -phigh xserver-xorg) is
Code:
Section "Device"
    Identifier    "Configured Video Device"
    Driver        "vesa"
EndSection

Section "Monitor"
    Identifier    "Configured Monitor"
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Monitor        "Configured Monitor"
    Device        "Configured Video Device"
EndSection
this setup gets me to boot but I have a flickering and reseting screen like I described.

when I run sudo X -configure from the recovery mode terminal it creates this xorg.conf file:
Code:
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    Screen      1  "Screen1" RightOf "Screen0"
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "/usr/share/fonts/X11/misc"
    FontPath     "/usr/share/fonts/X11/cyrillic"
    FontPath     "/usr/share/fonts/X11/100dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/75dpi/:unscaled"
    FontPath     "/usr/share/fonts/X11/Type1"
    FontPath     "/usr/share/fonts/X11/100dpi"
    FontPath     "/usr/share/fonts/X11/75dpi"
    FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection

Section "Module"
    Load  "record"
    Load  "xtrap"
    Load  "extmod"
    Load  "glx"
    Load  "dri"
    Load  "dbe"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    #DisplaySize      520   320    # mm
    Identifier   "Monitor0"
    VendorName   "SAM"
    ModelName    "SyncMaster"
    HorizSync    30.0 - 81.0
    VertRefresh  56.0 - 75.0
    Option        "DPMS"
EndSection

Section "Monitor"
    #DisplaySize      520   320    # mm
    Identifier   "Monitor1"
    VendorName   "SAM"
    ModelName    "SyncMaster"
    HorizSync    30.0 - 81.0
    VertRefresh  56.0 - 75.0
    Option        "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "Dac8Bit"                # [<bool>]
        #Option     "BusType"                # [<str>]
        #Option     "CPPIOMode"              # [<bool>]
        #Option     "CPusecTimeout"          # <i>
        #Option     "AGPMode"                # <i>
        #Option     "AGPFastWrite"           # [<bool>]
        #Option     "AGPSize"                # <i>
        #Option     "GARTSize"               # <i>
        #Option     "RingSize"               # <i>
        #Option     "BufferSize"             # <i>
        #Option     "EnableDepthMoves"       # [<bool>]
        #Option     "EnablePageFlip"         # [<bool>]
        #Option     "NoBackBuffer"           # [<bool>]
        #Option     "DMAForXv"               # [<bool>]
        #Option     "FBTexPercent"           # <i>
        #Option     "DepthBits"              # <i>
        #Option     "PCIAPERSize"            # <i>
        #Option     "AccelDFS"               # [<bool>]
        #Option     "DDCMode"                # [<bool>]
        #Option     "IgnoreEDID"             # [<bool>]
        #Option     "DisplayPriority"        # [<str>]
        #Option     "PanelSize"              # [<str>]
        #Option     "ForceMinDotClock"       # <freq>
        #Option     "ColorTiling"            # [<bool>]
        #Option     "VideoKey"               # <i>
        #Option     "RageTheatreCrystal"     # <i>
        #Option     "RageTheatreTunerPort"     # <i>
        #Option     "RageTheatreCompositePort"     # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"              # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"            # <i>
        #Option     "RenderAccel"            # [<bool>]
        #Option     "SubPixelOrder"          # [<str>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "DynamicClocks"          # [<bool>]
        #Option     "VGAAccess"              # [<bool>]
        #Option     "ReverseDDC"             # [<bool>]
        #Option     "LVDSProbePLL"           # [<bool>]
        #Option     "AccelMethod"            # <str>
        #Option     "DRI"                    # [<bool>]
        #Option     "ConnectorTable"         # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"         # [<bool>]
        #Option     "TVDACLoadDetect"        # [<bool>]
        #Option     "ForceTVOut"             # [<bool>]
        #Option     "TVStandard"             # <str>
        #Option     "IgnoreLidStatus"        # [<bool>]
        #Option     "DefaultTVDACAdj"        # [<bool>]
        #Option     "Int10"                  # [<bool>]
    Identifier  "Card0"
    Driver      "radeon"
    VendorName  "ATI Technologies Inc"
    BoardName   "RV280 [Radeon 9200 PRO]"
    BusID       "PCI:1:10:0"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card1"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection

Section "Screen"
    Identifier "Screen1"
    Device     "Card1"
    Monitor    "Monitor1"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection
It seems like my graphics are properly detected and should be running from what I've learn but when I boot (if I'm) I get a message like "Your graphics, mouse, and keyboard are not properly configured. You must configure them manually" then I have to run in low graphics mode which gets me right back where I started. OR if I'm not lucky when I boot at some point in the boot(it always seems like a different time) xubuntu seems to stop booting and I get a blank screen with the words Radeon 9250 P/N (a number) BIOS and my computer just sits there.

I've had this card somewhat working with other monitors but I can't use those anymore and I would like to get all of the 3d and stuff working propely(I am not at all concerned about the TV out feature by the way)

Also I've run Knoppix from a live cd and it correctly detects and runs very well. The xorg files look very similar.

Im very grateful for any help and I no this question has been asked like a hundred times but I just can't get it to work. Sorry i'ts so long.