Page 104 of 107 FirstFirst ... 45494102103104105106 ... LastLast
Results 1,031 to 1,040 of 1069

Thread: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

  1. #1031
    Join Date
    Jul 2012
    Beans
    1

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    Quote Originally Posted by andriod2388 View Post
    I'm having problems with sixad. i go to pair my ps3 controller and it rumbles and the LEDs light up but then fails and i get this in the terminal.


    andy@andy-Presario-CQ56-Notebook-PC:~$ sixad --start
    sixad-bin[15782]: started
    sixad-bin[15782]: sixad started, press the PS button now
    sixad-bin[15782]: Server mode active, will start search now
    sixad-bin[15782]: One event received
    sixad-bin[15782]: Will initiate Sixaxis now
    sixad-bin[15782]: One event proccessed
    sixad-sixaxis[15784]: started
    sixad-sixaxis[15784]: Connected 'PLAYSTATION(R)3 Controller (60:38:0E:C4:A0:15)' [Battery 00]
    sixad-sixaxis[15784]: Bad Sixaxis buffer (out of battery?), disconneting now...
    sixad-sixaxis[15784]: Read loop was broken on the Sixaxis process
    sixad-sixaxis[15784]: Closing uinput...
    sixad-sixaxis[15784]: uinput_close()::ioctl(UI_DEV_DESTROY) - success!
    sixad-sixaxis[15784]: uinput_close()::close(fd) - success!
    sixad-sixaxis[15784]: Done

    I have no idea what to do or what the problem is. thank you for any help

    I'm having the same problem. The LEDs on the sixaxis flash in succession and it rumbles but then i get the same error as andriod2388. The batteries are fully charged and the sixaxis works fine on the ps3.

    Any ideas?

    Thanks
    Last edited by tarff; July 17th, 2012 at 07:30 AM.

  2. #1032
    Join Date
    Jan 2011
    Location
    Illinois, U.S.
    Beans
    49
    Distro
    Ubuntu Development Release

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    I have been using qtsixa for a while now with much success but there are a couple things bugging me that I can't seem to figure out-

    1.) When using the mouse emulation on the right analog stick the mouse is always slow and choppy and changing the axis multiplier speed has no effect whatsoever.(haven't tested on left stick yet but wouldn't use that anyway) This used to work perfectly for me but at some point something happened and now its unusable because its just too slow

    2.) When using qtsixa with wine the right joystick isn't recognized properly. i.e. with San Andreas I use the "Joystick" option in qtsixa, no mouse+keys checked, and everything works perfect except I can't look up or down on the right joystick. This happens in other games as well. I don't know if this a bug in wine or if there is something else that could be tweaked in qtsixa to fix this. I was using the right joystick as mouse at one time to work around the problem but that isn't working right due to the problem I mentioned above.

    Any help on these would be much appreciated!
    btw I am using qtsixa 1.5.1 from the kxstudio ppa on Ubuntu 12.04

  3. #1033
    Join Date
    Aug 2012
    Beans
    7

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    I was just wondering if the project was dead or not. Because I noticed decline in numbers of Dualshock 3 in the stores, with some of them just saying that it has been discontinued.

  4. #1034
    Join Date
    Nov 2007
    Location
    Portugal
    Beans
    1,155

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    Quote Originally Posted by BlackDynamite View Post
    I was just wondering if the project was dead or not. Because I noticed decline in numbers of Dualshock 3 in the stores, with some of them just saying that it has been discontinued.
    the project is not exactly dead, but it's true I've lost interest on it.
    I'll do some update at a later time, very likely before the ubuntu-12.10 release.

  5. #1035
    Join Date
    Sep 2012
    Beans
    1

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    Hello, i have problem with BT connection ubuntu-DS3.
    What's the problem? Let me show You.

    I have Ubuntu 12.04 LTS with Linux Kernel 3.2.0-31-generic. Version of QtSixA is 1.5.1.
    That is my lsusb and lspci:
    http://wklej.org/id/829261/
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_105025.png

    QtSixA found DualShock3 (via USB)
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_105324.png

    And PCSX found DS3 (via USB) as "Gasia Co., Ltd PS(R) Gamepad" ?
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_110253.png
    (but I can't set buttons configuration, buttons from DS3 are not working via USB in PCSX)

    Sixpair (working)
    http://wklej.org/id/829267/

    Led status when connect via USB (blinking all leds [slow])

    And now I'm unplug DS3 from USB and try to connect via BlueTooth.

    Starting SixAD
    http://wklej.org/id/829276/
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_112004.png
    I'm pressing PSButton (all leds blinking [faster]) but a few seconds later DS3 is turning off. I'm pressing PSButton 3 times, no response from SixAD. Forse quit and stopping SixAD.

    QtSixA found DS3 via BlueTooth when I'm pressed PSButton but only for time when leds are blinking. When DS3 stopped trying to connect DS3 from QtSixA gone.
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_112606.png

    Ubuntu found new Bluetooth device and asking for access permission. (when DS3 try to connect with QtSixA)
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_112625.png
    I'm pressing PSButton again and Ubuntu found DS3 (leds blinking).
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_112657.png
    Connecting...
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_112707.png
    And failed.
    http://wstaw.org/m/2012/09/15/Zrzut_...-15_112741.png

    So I can't connect with my DualShock3 via USB and via BlueTooth. None emulator or QJoyPad can't find and configure device or keys via USB and BlueTooth. DS3 can't synchronize with Ubuntu via BlueTooth. Someone have good solve for my problem?

  6. #1036
    Join Date
    Nov 2007
    Location
    Portugal
    Beans
    1,155

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    well, you just need this:

    1 - sixpair
    2 - run sixad, like this:
    Code:
    sixad --stop
    sixad -s
    While you press the PS button to connect, run this on a different terminal:
    Code:
    sudo killalll -KILL bluetoothd
    run it several times until the sixaxis connect.
    (That command prevents normal bluetooth from catching events needed in sixad).

  7. #1037
    Join Date
    Oct 2012
    Beans
    1

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    Hi falkTX
    Just a note to say please do update qtsixa!! I love my sixaxis pad but have not been able to use it since switching to kubuntu from windows7. I love kubuntu and dont want to switch back just to be able to use my gamepad, especially since the games I use run so well in linux (via wine of course)
    If the few bugs in your driver were ironed out so it worked properly in kubuntu it would be an amazing utility! If you are willing to fix it then im willing to make a donation

    The trouble im having is as follows: To begin with it worked ok (connecting by command line only, but worked) but recently it wont connect at all. Ive tried a different bluetooth manager, different bluetoth dongle and even a different controller (cost me £35 for nothing DX) I tried purging all bluetooth and sixaxis software and reinstalling too, but still no joy. I know (from youtube vids) that in ubuntu (and I assume kubuntu) 10.10 this driver worked flawlessly, even connecting/auto-connecting via gui. I'm guessing updates to the linux kernel or bluetooth stack must have broken it? Either way an updated and fixed version of qtsixa/sixad would be a lifesaver for me
    Please please please please please fix it!!

  8. #1038
    Join Date
    Oct 2012
    Beans
    3

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    Quote Originally Posted by nzsmartie View Post
    Hey Guys,

    This may be relevant to the development of QtSixA.
    I've modified a bluetooth stack to support Playstation 3 Controllers on a 16bit MCU (PIC24FJ256DA210) using a usb bluetooth module. The controller I was testing with is in fact a Gasia GamePad, it frustrated me for a while as to why It wouldn't work. That was until a user in this thread had posted a different HID Report that enables the fake controller. I've modified my code to support this and it works.
    I went on to see If I could detect the difference between a real and a fake controller. Not too sure how well this works but when you send "0xf4, 0x42, 0x03, 0x00, 0x00" over the HID Control, A single byte will be sent back (0x00) over the HID Control. This doesn't happen when I send the rather long (0xA2,0x01,0x00, 0x00, ...) to enable the Fake controller. So I've decided that when I read a single 0x00 byte on the HID Control, I'll then send the enable gasia report, and well, it works.
    I don't have a real controller on me atm to test if it works with that but I hope this might help in detecting a real to a fake controller.

    Cheers
    Roman
    Hi all! I have a fake ps3 controller (CHECHZ2U) and have common problem with blinking led's and unable wireless data transfer.
    I tryed vanilla qtsixa 1.5.1-6 and patched for sdp version, but no luck.
    my controller info:

    Bus 002 Device 004: ID 054c:0268 Sony Corp. Batoh Device / PlayStation 3 Controller
    [ 7030.886834] sony 0003:054C:0268.0005: Fixing up Sony Sixaxis report descriptor
    [ 7030.892867] input: Gasia Co.,Ltd PS(R) Gamepad as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input13
    [ 7030.893261] sony 0003:054C:0268.0005: input,hiddev0,hidraw3: USB HID v1.11 Joystick [Gasia Co.,Ltd PS(R) Gamepad] on usb-0000:00:1d.0-1/input0
    sixad log:
    sixad -s
    sixad-bin[1241]: started
    sixad-bin[1241]: sixad started, press the PS button now
    sixad-bin[1241]: Server mode active, will start search now
    sixad-bin[1241]: One event received
    sixad-bin[1241]: unable to connect to sdp session
    sixad-bin[1241]: Creating new device using the default driver...
    sixad-bin[1241]: unable to connect to sdp session
    sixad-bin[1241]: HID create error 110 (Connection timed out)
    Also i can post any "usb-magick" dump for devs.
    Any one can help me plz?

  9. #1039
    Join Date
    Oct 2012
    Beans
    3

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    yeah. paired it successfully with sixad!
    default 1.5.1 version dont work with fake gasia gamepads, so i used latest git version
    thanks for all devs!

  10. #1040
    Join Date
    Oct 2012
    Beans
    2

    Re: HOW-TO: Connect Sixaxis to Ubuntu trough bluetooth mode

    Quote Originally Posted by macau View Post
    yeah. paired it successfully with sixad!
    default 1.5.1 version dont work with fake gasia gamepads, so i used latest git version
    thanks for all devs!
    Hi macau, could you show me where to get the latest git version?

    I have the same controller with you and after connecting it vibrate non stop. Do you have this issue?

Page 104 of 107 FirstFirst ... 45494102103104105106 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •