Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: mpd with mcp, ncmcp, ncmpc++

  1. #31
    Join Date
    Jul 2008
    Location
    Éire
    Beans
    88

    Re: mpd with mcp, ncmcp, ncmpc++

    I'm not sure what the problem is man.

    Jun 08 17:37 : can't find alsa mixer_control "PCM"
    If you run "alsamixer" on my comp there is a column called pcm and it's this that the volume in mpd controls. Maybe try turning up all of the columns and making sure none are muted (by pressing m).

    Otherwise maybe try running alsaconf, just be careful that you don't mess up your normal sound settings. Actually now that i think of it, that probably won't help cause your other apps seem to be working fine, so better off not running alsaconf.

    Also try running "xhost + mpd" or "sudo xhost + mpd" to fix the XOpenDisplay() failed error. Got that from this page:

    https://bugs.launchpad.net/ubuntu/+s...35/+viewstatus

    and don't forget to restart mpd after. Not sure if it'd be necessary to restart x or not.
    To be human is to affirm one's humanity by recognizing the humanity of others and, on that basis, establish respectful human relations with them.

    Ubuntu User 24011

  2. #32
    Join Date
    Aug 2007
    Beans
    68

    Re: mpd with mcp, ncmcp, ncmpc++

    Hi, no worries, thanks for your patient help!

    I checked alsamixer, and Front mic was down, but putting it all the way up just increases noise, but doesn't play back music. Mic was down as well, but still doesn't change anything.

    I ran the line 'xhost + mpd' and got 'xhost: bad hostname "mpd"'...

    I'll have to leave soon, so I'll only be able to continue later on this evening or tomorrow, but again thanks very much for your help!!!
    Last edited by bgc; June 8th, 2009 at 06:05 PM.

  3. #33
    Join Date
    Jul 2008
    Location
    Éire
    Beans
    88

    Re: mpd with mcp, ncmcp, ncmpc++

    No bother, sorry I couldn't help more.

    Did you try the "sudo xhost + mpd" command. Maybe do that and post the error log again.
    To be human is to affirm one's humanity by recognizing the humanity of others and, on that basis, establish respectful human relations with them.

    Ubuntu User 24011

  4. #34
    Join Date
    Aug 2007
    Beans
    68

    Re: mpd with mcp, ncmcp, ncmpc++

    Here's the output of mpd.error (that is without an X restart):

    Code:
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 11595] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 11737] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 16:16 : can't find alsa mixer_control "PCM"
    Jun 08 16:16 : using software volume
    Jun 08 16:16 : Error opening ALSA device "hw:0,0": Device or resource busy
    Jun 08 16:16 : problems opening audio device while playing "7/Parsifal1.ape"
    Jun 08 16:16 : problems opening audio device while playing "7/Parsifal1.ape"
    Jun 08 16:16 : Error opening ALSA device "hw:0,0": Device or resource busy
    Jun 08 16:16 : problems opening audio device while playing "7/Parsifal1.ape"
    Jun 08 16:16 : problems opening audio device while playing "7/Parsifal2.ape"
    Jun 08 16:17 : Error opening ALSA device "hw:0,0": Device or resource busy
    Jun 08 16:17 : problems opening audio device while playing "7/Parsifal1.ape"
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 12651] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 17:16 : can't find alsa mixer_control "PCM"
    Jun 08 17:16 : using software volume
    Jun 08 17:17 : Error opening ALSA device "hw:0,0": Device or resource busy
    Jun 08 17:17 : problems opening audio device while playing "7/Parsifal1.ape"
    Jun 08 17:17 : problems opening audio device while playing "7/Parsifal1.ape"
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 12871] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 17:27 : can't find alsa mixer_control "PCM"
    Jun 08 17:27 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 13041] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 17:37 : can't find alsa mixer_control "PCM"
    Jun 08 17:37 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 13344] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 17:56 : can't find alsa mixer_control "PCM"
    Jun 08 17:56 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 13368] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 17:58 : can't find alsa mixer_control "PCM"
    Jun 08 17:58 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 13539] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 18:01 : can't find alsa mixer_control "PCM"
    Jun 08 18:01 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 18:02 : can't find alsa mixer_control "PCM"
    Jun 08 18:02 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    I: caps.c: Dropping root privileges.
    I: caps.c: Limited capabilities successfully to CAP_SYS_NICE.
    [WARN 13578] polkit-session.c:144:polkit_session_set_uid(): session != NULL
     Not built with -rdynamic so unable to print a backtrace
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed
    Jun 08 18:03 : can't find alsa mixer_control "PCM"
    Jun 08 18:03 : using software volume
    No protocol specified
    E: client-conf-x11.c: XOpenDisplay() failed

  5. #35
    Join Date
    Aug 2007
    Beans
    68

    Re: mpd with mcp, ncmcp, ncmpc++

    OK, I have no idea why or what or when, but evidently restarting X eventually did the trick and it now seems to work! Thanks for your help!!!

  6. #36
    Join Date
    Jul 2008
    Location
    Éire
    Beans
    88

    Re: mpd with mcp, ncmcp, ncmpc++

    Hey, nice 1! Glad I could help.
    To be human is to affirm one's humanity by recognizing the humanity of others and, on that basis, establish respectful human relations with them.

    Ubuntu User 24011

Page 4 of 4 FirstFirst ... 234

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •