HUAWEI ets2288 modem setup problem on UBUNTU 9.04

**virginbala** · June 6th, 2009

HI EVERYONE,

I'VE TRYED SO MANY TIMES TO CONFIGURE HUAWEI ETS2288 WIRELESS MODEM, I COULDN'T RESOLVE THIS ONE, ALSO I TRYED 8...VERSION UBUNTU CONGURATION.. DIDN'T WORK
HERE SHOWN FOLLOWING ERROR
PLZ HELP ME

[ 99.104050] usb 4-2: USB disconnect, address 2

[ 99.104865] ti_usb_3410_5052_1 ttyUSB0: TI USB 3410 1 port adapter converter now disconnected from ttyUSB0

[ 99.104889] ti_usb_3410_5052 4-2:2.0: device disconnected

[ 143.720018] usb 4-2: new full speed USB device using uhci_hcd and address 3

[ 143.914421] usb 4-2: configuration #1 chosen from 1 choice

[ 143.918462] ti_usb_3410_5052 4-2:1.0: TI USB 3410 1 port adapter converter detected

[ 143.918470] usb 4-2: firmware: requesting ti_usb-v0451-p3410.fw

[ 143.941453] usb 4-2: firmware: requesting ti_3410.fw

[ 144.532019] usb 4-2: reset full speed USB device using uhci_hcd and address 3

[ 144.675989] usb 4-2: device firmware changed

[ 144.676270] ti_usb_3410_5052: probe of 4-2:1.0 failed with error -5

[ 144.676439] usb 4-2: USB disconnect, address 3

[ 144.788030] usb 4-2: new full speed USB device using uhci_hcd and address 4

[ 145.011081] usb 4-2: configuration #1 chosen from 2 choices

[ 145.014048] ti_usb_3410_5052 4-2:1.0: TI USB 3410 1 port adapter converter detected

[ 145.014063] ti_usb_3410_5052: probe of 4-2:1.0 failed with error -5

[ 145.020649] ti_usb_3410_5052 4-2:2.0: TI USB 3410 1 port adapter converter detected

[ 145.020742] usb 4-2: TI USB 3410 1 port adapter converter now attached to ttyUSB0

[ 340.672048] usb 4-2: USB disconnect, address 4

[ 340.672428] ti_usb_3410_5052_1 ttyUSB0: TI USB 3410 1 port adapter converter now disconnected from ttyUSB0

[ 340.672450] ti_usb_3410_5052 4-2:2.0: device disconnected

[ 348.696018] usb 3-1: new full speed USB device using uhci_hcd and address 2

[ 348.890124] usb 3-1: configuration #1 chosen from 1 choice

[ 348.895320] ti_usb_3410_5052 3-1:1.0: TI USB 3410 1 port adapter converter detected

[ 348.895329] usb 3-1: firmware: requesting ti_usb-v0451-p3410.fw

[ 348.900992] usb 3-1: firmware: requesting ti_3410.fw

[ 349.492025] usb 3-1: reset full speed USB device using uhci_hcd and address 2

[ 349.635987] usb 3-1: device firmware changed

[ 349.636256] ti_usb_3410_5052: probe of 3-1:1.0 failed with error -5

[ 349.636426] usb 3-1: USB disconnect, address 2

[ 349.748020] usb 3-1: new full speed USB device using uhci_hcd and address 3

[ 349.971083] usb 3-1: configuration #1 chosen from 2 choices

[ 349.979830] ti_usb_3410_5052 3-1:1.0: TI USB 3410 1 port adapter converter detected

[ 349.979847] ti_usb_3410_5052: probe of 3-1:1.0 failed with error -5

[ 349.984062] ti_usb_3410_5052 3-1:2.0: TI USB 3410 1 port adapter converter detected

[ 349.984152] usb 3-1: TI USB 3410 1 port adapter converter now attached to ttyUSB0

bala@bala-desktop:~$

PLZ HELP ME STEP BY STEP PROCEDURE