9.04 Jaunty Remix on Acer Aspire One, Screen Clone

[sagnaroth]

Hi!, i just installed the new 9.04 Jaunty Remix on Aspire One Notebook.
Everything is working great, but maximum resolution that i can get is 800x600 under clone mode or native screen.
Strangely if i disable clone mode, i can get maximum resolutions on each screen, 1024x600 for AAO screen.

The issue is that normal use of the notebook is not to work with a second screen, so i'm limited to 800x600.

Another point is to say that the new interface in Remix is great for small screens, but i think that is not well solved to work over non-cloned screens, is not easy to use the second one (drag & overlap is not well resoluted ).

I have searched this issue (800x600) but seems that only happens to me?...strange.
Thanks

[wirechief]

I tried this:
xrandr
Screen 0: minimum 320 x 200, current 1024 x 600, maximum 1024 x 1024
VGA disconnected (normal left inverted right x axis y axis)
LVDS connected 1024x600+0+0 (normal left inverted right x axis y axis) 223mm x 125mm
1024x600 60.0*+
800x600 85.1 72.2 75.0 60.3 56.2
640x480 85.0 72.8 75.0 59.9
720x400 85.0
640x400 85.1
640x350 85.1

my kernel: Linux ubuntu 2.6.28-11-generic #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 i686 GNU/Linux

my infobash

infobash -v3 0
Host/Kernel/OS "ubuntu" running Linux 2.6.28-11-generic i686 [ Jaunty 9.04 remix ]
CPU Info (1) Intel Atom N270 @ 512 KB cache flags( sse3 ) clocked at [ 1600.000 MHz ]
(2) Intel Atom N270 @ 512 KB cache flags( sse3 ) clocked at [ 800.000 MHz ]
Videocard Intel Mobile 945GME Express Integrated Graphics Controller X.Org 1.6.0 [ 1024x600@60.0hz ]
Network cards Attansic Corp. L1e Gigabit Ethernet Adapter, at port: 1000
Atheros AR242x 802.11abg Wireless PCI Express Adapter
Processes 140 | Uptime 32min | Memory 207.1/993.1MB | HDD Generic- Multi-Card,ATA TOSHIBA MK1652GS,USB DISK 2.0 Size 166GB (0%used) | Client Shell | Infobash v3.11

not sure what your system specs are but so far this live-usb is working ok.

[wirechief]

for some reason though i had to use usb fdd in my bios boot selection for the usb stick...
does your screen resolution work ok with the live-media that you used to install ? also
I would double check your md5sum to make sure the integrity is ok