Page 11 of 29 FirstFirst ... 91011121321 ... LastLast
Results 101 to 110 of 282

Thread: Wireless issues with WUSB54GC v3

  1. #101
    Join Date
    Jul 2009
    Beans
    4

    Re: Wireless issues with WUSB54GC v3

    hello
    I buy a USB stick ZIONCOM WL0162 with RT3070L chipset and RT3070 drivers
    I test the drivers to install Ralink 2009_0525_RT3070_Linux_STA_v2.1.1.0.bz2

    Code:
     wget http://www.ralinktech.com.tw/data/drivers/2009_0525_RT3070_Linux_STA_v2.1.1.0.bz2
    Code:
     tar xjf 2009_0525_RT3070_Linux_STA_v2.1.1.0.bz2
    Code:
     cd 2009_0525_RT3070_Linux_STA_v2.1.1.0.bz2
    Code:
     gedit os / linux / config.mk
    I change in Config.mk by = n = y
    Code:
     # ifdef WPA_SUPPLICANT_SUPPORT 
     # Support wpa_supplicant 
     HAS_WPA_SUPPLICANT = y 
     # endif / / WPA_SUPPLICANT_SUPPORT / / 
    
     # ifdef NATIVE_WPA_SUPPLICANT_SUPPORT 
     # Support Native WpaSupplicant for Network Maganga 
     HAS_NATIVE_WPA_SUPPLICANT_SUPPORT = y 
     # endif / / NATIVE_WPA_SUPPLICANT_SUPPORT / /
    Code:
      gedit / etc / modules
    I add in modules:
    "Alias ra0 rt3070sta"
    Close and save
    after I install and compile

    Code:
     sudo make & & sudo make install
    after I go to the folder:
    etc/wireless/RT3070sta/RT2870sta.dat
    here it is necessary to change the file RT3070STA by RT2870STA
    I use sudo nautilus to change
    Code:
     etc/Wireless/RT2870STA/RT2870STA.dat
    after I finished with:
    Code:
      
    sudo modprobe RT3070STA
    Code:
      
    sudo ifconfig ra0 up
    especially for me I use Aircrack-ng and airodump-ng and
    but arrive in airodump-ng it just scans the channel 11, not the other channel
    you had can be a solution to my problem?
    I must know I am not using network-manager
    I just want it to work on airodump-ng and aircrack-ng
    I really need help
    sorry for my English, which is not good
    Please help me thank you

  2. #102
    Join Date
    Aug 2008
    Beans
    302
    Distro
    Kubuntu 11.10 Oneiric Ocelot

    Re: Wireless issues with WUSB54GC v3

    YES!!!!! finally got it working ! thank you so much !

    (fireworks in the sky accompanied by beautiful music in the background)

  3. #103
    Join Date
    Jul 2009
    Beans
    4

    Re: Wireless issues with WUSB54GC v3

    hello
    I really need help this time
    I have it install the RT3070 drivers but there is always the drivers install RT2870
    impossible to install!
    how can I do?
    how to clear the RT2870 drivers for the RT3070 finally put in place?

  4. #104
    Join Date
    Jun 2009
    Beans
    3

    Re: Wireless issues with WUSB54GC v3

    Ubuntu 9.04 Jaunty 64 bit

    I had the issue with the version 3 device and consequently returned it after I couldn't sift through the guide process (I'm a noob =P)

    Incidentally, if anyone is looking for a way to get non version 3 WUSB54GC devices, try some non computer stores. I got mine in the computer section at Target. It was, seeing as how they do not stock up to date parts, version 1.3 with the rt73usb chipset. It worked right out of the box without even needing the CD.

    In short, check general stores since they rarely keep stock and it seems like a popular model.

    Also, to those seeking non v3 devices, I found that the USB card pictured on the version 1.3 box is White for version and black on the version 3.

  5. #105
    Join Date
    Jun 2005
    Location
    Indian Harbour Beach, FL,
    Beans
    965
    Distro
    Ubuntu 10.10 Maverick Meerkat

    Re: Wireless issues with WUSB54GC v3

    I wonder if there will come a day that the v3 version driver for the rt3070 chip will be included as part of the Ubuntu distribution.

    Sure would be nice but I guess that's the "fun" of Linux, right?
    Registered Linux User #400396
    ... "Let me summarize the early days of software in one sentence: In the beginning, there was software, and it was free."

  6. #106
    Join Date
    Aug 2008
    Beans
    2
    Distro
    Ubuntu 8.10 Intrepid Ibex

    Re: Wireless issues with WUSB54GC v3

    I got the wireless adapter to recognize wireless access points (I know because Ubuntu tells me that it has detected the presence of access points, including my router) but unfortunately though, when I try to connect to my router at home (which also displays that it has a strong signal) ubuntu just "attempts" to connect, and keeps showing me a dialog box telling me to enter the password to the router. All it does basically is that it tries to connect, but never gives me any internet connection.

    Anyways, I'm using Ubuntu 9.04, my wireless adapter is a Linksys Compact Wireless-G USB Adapter (Model No. WUSB54GC Ver. 3), and my router is a 2Wire router (given to me for free by telus), and the connection is via WEP and not WPA (I know because that's how I connect on windows), and I'm 100% sure the password I'm entering is correct.

    The thing is though, I skipped step 9 of the tutorial. Does that have anything to do with it?
    Last edited by DaGodFuddah; July 18th, 2009 at 11:36 PM.

  7. #107
    Join Date
    Nov 2008
    Beans
    34

    Re: Wireless issues with WUSB54GC v3

    Hello,

    First, thanks a lot for the instructions.

    I have a similar problem as few others... my Ubuntu sees all the networks now but when it tries to connect to mine it tries and tries and tries but never connect... I tried with WEP, WPA and even with Nothing, but it just cannot get thru...

    I have a Linksys router and a brand new Linksys antenna...

    At least this is a progress to my previous state, where I was trying to use the build in wireless antenna of my laptop, Atheros drivers, and I could not even see the wireless networks.

    So, I guess that I am missing something... maybe basic...?

    All the steps were executed without problems... the channel is properly set... everything seems fine.... but it isn't...


    Any hint? My wife is freaking out with a 10 meter cable through the house


    Thanks!!!!!!!!!!!!

    Kind regards,
    Fran

  8. #108
    Join Date
    Nov 2008
    Beans
    34

    Arrow Re: Wireless issues with WUSB54GC v3

    Hi,

    Here you have some details of my configuration... any idea is welcomed... I have tried everything and It seems I cannot connect.

    Ubuntu 9.04
    Wireless:WUSB54GC v. 3

    I'll try to be short...

    I can see the networks around me:

    Code:
    sudo iwlist scan
    lo        Interface doesn't support scanning.
    
    eth0      Interface doesn't support scanning.
    
    ra0       Scan completed :
              Cell 01 - Address: 00:18:01:F8:9B:B1
                        ESSID:"HE4N4"
                        Mode:Managed
                        Channel:1
                        Quality:5/100  Signal level:-88 dBm  Noise level:-97 dBm
                        Encryption key:on
                        Bit Rates:18 Mb/s
              Cell 02 - Address: 00:1A:70:D5:24:D0
                        ESSID:"EUF"
                        Mode:Managed
                        Channel:6
                        Quality:100/100  Signal level:-48 dBm  Noise level:-97 dBm
                        Encryption key:on
                        Bit Rates:54 Mb/s
                        IE: IEEE 802.11i/WPA2 Version 1
                            Group Cipher : TKIP
                            Pairwise Ciphers (2) : CCMP TKIP
                            Authentication Suites (1) : PSK
              Cell 03 - Address: 00:18:01:F9:17:DE
                        ESSID:"XVVO4"
                        Mode:Managed
                        Channel:11
                        Quality:15/100  Signal level:-84 dBm  Noise level:-97 dBm
                        Encryption key:on
                        Bit Rates:18 Mb/s
    
    pan0      Interface doesn't support scanning.
    EUF is mine.


    When I try to connect I get this:


    Code:
    sudo wpa_supplicant -Dwext -ira0 -c/etc/wpa_supplicant.conf -dd
    Initializing interface 'ra0' conf '/etc/wpa_supplicant.conf' driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
    Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
    Reading configuration file '/etc/wpa_supplicant.conf'
    ctrl_interface='/var/run/wpa_supplicant'
    Line: 4 - start of a new network block
    ssid - hexdump_ascii(len=3):
         45 55 46                                          EUF             
    scan_ssid=0 (0x0)
    proto: 0x2
    key_mgmt: 0x2
    auth_alg: 0x1
    pairwise: 0x18
    group: 0x18
    PSK (ASCII passphrase) - hexdump_ascii(len=8): [REMOVED]
    
    PSK (from passphrase) - hexdump(len=32): [REMOVED]
    Priority group 0
       id=0 ssid='EUF'
    Initializing interface (2) 'ra0'
    Interface ra0 set UP - waiting a second for the driver to complete initialization
    SIOCGIWRANGE: WE(compiled)=22 WE(source)=14 enc_capa=0xf
      capabilities: key_mgmt 0xf enc 0xf flags 0x0
    WEXT: Operstate: linkmode=1, operstate=5
    Own MAC address: 00:23:69:e0:2d:41
    wpa_driver_wext_set_wpa
    wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
    wpa_driver_wext_set_countermeasures
    wpa_driver_wext_set_drop_unencrypted
    RSN: flushing PMKID list in the driver
    Setting scan request: 0 sec 100000 usec
    EAPOL: SUPP_PAE entering state DISCONNECTED
    EAPOL: KEY_RX entering state NO_KEY_RECEIVE
    EAPOL: SUPP_BE entering state INITIALIZE
    EAP: EAP entering state DISABLED
    Using existing control interface directory.
    Added interface ra0
    RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
    RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
    RTM_NEWLINK: operstate=0 ifi_flags=0x11043 ([UP][RUNNING][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
    Wireless event: cmd=0x8b06 len=8
    RTM_NEWLINK: operstate=0 ifi_flags=0x11003 ([UP][LOWER_UP])
    RTM_NEWLINK, IFLA_IFNAME: Interface 'ra0' added
    State: DISCONNECTED -> SCANNING
    Starting AP scan (broadcast SSID)
    Trying to get current scan results first without requesting a new scan to speed up initial association
    ioctl[SIOCGIWSCAN]: Resource temporarily unavailable
    Failed to get scan results
    Failed to get scan results - try scanning again
    Setting scan request: 0 sec 0 usec
    Starting AP scan (broadcast SSID)
    Scan requested (ret=0) - scan timeout 5 seconds
    So, it does not connect.


    My configuration file is:

    Code:
    ctrl_interface=/var/run/wpa_supplicant
    #ap_scan=2
    
    network={
    	ssid="EUF"
    	scan_ssid=0
    	proto=WPA2
    	key_mgmt=WPA-PSK
    	auth_alg=OPEN
    	pairwise=CCMP TKIP
    	group=CCMP TKIP
    	psk=9e59d...
    }

    Check that the driver is there...

    Code:
    lsmod|grep 'rt2870sta'
    rt2870sta             502868  1

    If I have a 0 after the 502868 I can turn it on with:

    Code:
    sudo ifconfig ra0 up


    I followed all the instructions of this post and several other posts... no luck yet but if I see the networks It must be close....

    Thank you very much!!

    Kind regards,
    Hipo

  9. #109
    Join Date
    Jul 2006
    Beans
    3

    Re: Wireless issues with WUSB54GC v3

    Hi guys,
    I had managed to get my EnGenius EUB-9703 running. I got it cheap at Carrefour for less than 20 SGD. It is using RT3070 and I got it running with WPA2 with iwpriv, I couldn't get it to work with WPA Supplicant.

    The commands are actually very simple:

    ifconfig ra0 up
    iwpriv ra0 set NetworkType=Infra
    iwpriv ra0 set AuthMode=WPA2PSK
    iwpriv ra0 set EncrypType=TKIP
    iwpriv ra0 set SSID="your ssid"
    iwpriv ra0 set WPAPSK="your passphrase."
    iwpriv ra0 set SSID="your ssid"
    dhclient ra0
    Last edited by picochu; July 28th, 2009 at 05:12 PM.

  10. #110
    Join Date
    Nov 2008
    Beans
    34

    Re: Wireless issues with WUSB54GC v3

    Hello,

    Finally I killed my Ubuntu and reinstall it from scratch... a couple of years of incremental updates leave your machine with a good amount of crap...

    and.... I can CONNECT!!!!!!!!!!!!!!!!!!!!

    Thank you very much for the help!

    My next step is figuring out why every 2 minutes it prompts for the WPA password... I just have to click Ok, but it is pretty annoying.

    Regards,
    Hipo

Page 11 of 29 FirstFirst ... 91011121321 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •