On my card
I kept the default Jaunty installation with UXA and false tiling in Xorg. The system is quite good, the only thing I found very bad is flash on web (ie. Youtube), the CPU goes to 100%00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
I've tried the vanilla kernel 2.6.30rc2 and no problem at all for the performances (flash too); just my old notebook do fan spins all the time
As usual I found the kernel here:
http://kernel.ubuntu.com/~kernel-ppa...e/v2.6.30-rc2/
PS. I discovered now also this one:
http://kernel.ubuntu.com/~kernel-ppa...e/v2.6.30-rc3/
Did not tried yet.
------------------------------------------------
yep ”short and long URL„
http://yep.it/
------------------------------------------------
any chance for a lpia build?
I don't have i386 here...
Good news (at least for me)
I've applied a silly trick to xorg.conf and now also flash is working properly
Yes. Putting the forgotten and deprecated option of VideoRam (in my case 64MB) in xorg.conf fixed everything here.Section "Device"
Identifier "Configured Video Device"
Option "AccelMethod" "UXA"
VideoRam 65536
EndSection
Kernel:
VGA:2.6.28-11-generic
Warning in xorg.0.log:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
I did not touch /proc/mtrr(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000202
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): VideoRam configuration found, which is no longer recommended.
(WW) intel(0): xf86AllocateGARTMemory: allocation of 1536 pages failed
(WW) intel(0): Allocation error, framebuffer compression disabled
(WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
(WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
(WW) intel(0): Hardware claims pipe A is on while software believes it is off
Hope this helps
------------------------------------------------
yep ”short and long URL„
http://yep.it/
------------------------------------------------
Mac Pro 5,1 6-Core 3.33GHz, 48GB, Sapphire RX580
Optical -- Apple Super Drive & MCE Internal Blu-ray
512GB SM 970 Pro NVMe/HighPoint 7101A/10.14.5
SonnetAllegro Pro USB 3/ 4TB WD/4TB - Barracuda
Last edited by dentaku65; April 23rd, 2009 at 12:25 AM.
------------------------------------------------
yep ”short and long URL„
http://yep.it/
------------------------------------------------
Great! I've got a lot of testing to do this comming week. I've got my ATI carded lappy working -okay-
Now with all the information in this thread, I hope to get my Intel X3100 working well.
Mods, since this Forum Section will be closed tomorrow. Please make this HOWTO: an active sticky in the appropriate place.
Mac Pro 5,1 6-Core 3.33GHz, 48GB, Sapphire RX580
Optical -- Apple Super Drive & MCE Internal Blu-ray
512GB SM 970 Pro NVMe/HighPoint 7101A/10.14.5
SonnetAllegro Pro USB 3/ 4TB WD/4TB - Barracuda
+1mods, since this forum section will be closed tomorrow. Please make this howto: An active sticky in the appropriate place.
I tested the 2.6.30-rc3 kernel and performance is slightly worse than rc2 - therefore I won't change the original instructions in the guide.
P.S. I'll request this thread to be moved as soon as Jaunty is released and this forum archived.
Here's what happens for me:
I suspect that something else fixed the issue for you, as your output indicates that you filtered only for warnings (WW), whereas the override is mentioned as information (II).Code:(WW) intel(0): VideoRam configuration found, which is no longer recommended. (II) intel(0): Continuing with default 131072kB VideoRam instead of 65536 kB.
Our graphics device is the same:
Code:00:02.0 VGA compatible controller: Intel Corporation 82852/855GM Integrated Graphics Device (rev 02)
Last edited by psyke83; April 23rd, 2009 at 04:05 AM.
Bookmarks