Results 1 to 7 of 7

Thread: Slow or none 3D Performance on Compaq(HP) 6510b

  1. #1
    Join Date
    Oct 2008
    Location
    Malmö, Sweden
    Beans
    16
    Distro
    Ubuntu Development Release

    Question Slow or none 3D Performance on Compaq(HP) 6510b

    Hi,

    I have some problems with running Ubuntu 8.10 (2.6.27-11 kernel) on my Compaq 6510b laptops (HP)

    Problem is that well, compiz works great but 3D acceleration works like crap. When i start Chess with 3d view every time i move a peace the window goes black. When i try to play Frets On Fire i get verry slow performance. Even wine dont work.

    When i tried EVE cedega and did a system test both 3D Acceleration test failed.

    Tried to reconfigure X but dint help a bit.

    Here is some info, also my xorg.conf if you need it.

    Best Regards
    Commander...

    Code:
    glxinfo | grep direct
    direct rendering: Yes
    
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
    00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
    00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 03)
    00:1c.2 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 3 (rev 03)
    00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 03)
    00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f3)
    00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 03)
    00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 03)
    02:04.0 CardBus bridge: Ricoh Co Ltd RL5c476 II (rev b6)
    02:04.1 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 02)
    10:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG [Golan] Network Connection (rev 02)
    18:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02)
    
    glxinfo
    name of display: :0.0
    display: :0  screen: 0
    direct rendering: Yes
    server glx vendor string: SGI
    server glx version string: 1.2
    server glx extensions:
        GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap, 
        GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer, 
        GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample, 
        GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
    client glx vendor string: SGI
    client glx version string: 1.4
    client glx extensions:
        GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
        GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory, 
        GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control, 
        GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control, 
        GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync, 
        GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer, 
        GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
    GLX version: 1.2
    GLX extensions:
        GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context, 
        GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control, 
        GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_swap_control, 
        GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig, 
        GLX_SGIX_visual_select_group
    OpenGL vendor string: Tungsten Graphics, Inc
    OpenGL renderer string: Mesa DRI Intel(R) 965GM 20061102
    OpenGL version string: 1.4 Mesa 7.2
    OpenGL extensions:
        GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program, 
        GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader, 
        GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters, 
        GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100, 
        GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_texture_border_clamp, 
        GL_ARB_texture_compression, GL_ARB_texture_cube_map, 
        GL_ARB_texture_env_add, GL_ARB_texture_env_combine, 
        GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3, 
        GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two, 
        GL_ARB_texture_rectangle, GL_ARB_transpose_matrix, 
        GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader, 
        GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color, 
        GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate, 
        GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract, 
        GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array, 
        GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord, 
        GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil, 
        GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset, 
        GL_EXT_rescale_normal, GL_EXT_secondary_color, 
        GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap, 
        GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D, 
        GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add, 
        GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3, 
        GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias, 
        GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB, 
        GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1, 
        GL_APPLE_client_storage, GL_APPLE_packed_pixels, 
        GL_ATI_blend_equation_separate, GL_ATI_separate_stencil, 
        GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, 
        GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture, 
        GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent, 
        GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection, 
        GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format, 
        GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp, 
        GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture, 
        GL_SUN_multi_draw_arrays
    
    3 GLX Visuals
       visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
     id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
    ----------------------------------------------------------------------
    0x21 24 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x22 24 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x55 32 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    
    36 GLXFBConfigs:
       visual  x  bf lv rg d st colorbuffer ax dp st accumbuffer  ms  cav
     id dep cl sp sz l  ci b ro  r  g  b  a bf th cl  r  g  b  a ns b eat
    ----------------------------------------------------------------------
    0x56  0 tc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    0x57  0 tc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
    0x58  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    0x59  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
    0x5a  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    0x5b  0 tc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
    0x5c  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x5d  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x5e  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x5f  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x60  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x61  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x62  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x63  0 tc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x64  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x65  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x66  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x67  0 tc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x68  0 dc  0 32  0 r  .  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    0x69  0 dc  0 32  0 r  .  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
    0x6a  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    0x6b  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
    0x6c  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0  0  0  0  0  0 0 None
    0x6d  0 dc  0 32  0 r  y  .  8  8  8  8  0  0  0 16 16 16 16  0 0 Slow
    0x6e  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x6f  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x70  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x71  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x72  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x73  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x74  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x75  0 dc  0 32  0 r  .  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x76  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x77  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    0x78  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8  0  0  0  0  0 0 None
    0x79  0 dc  0 32  0 r  y  .  8  8  8  8  0 24  8 16 16 16 16  0 0 Slow
    Code:
    # xorg.conf (X.Org X Window System server configuration file)
    #
    # This file was generated by dexconf, the Debian X Configuration tool, using
    # values from the debconf database.
    #
    # Edit this file with caution, and see the xorg.conf manual page.
    # (Type "man xorg.conf" at the shell prompt.)
    #
    # This file is automatically updated on xserver-xorg package upgrades *only*
    # if it has not been modified since the last upgrade of the xserver-xorg
    # package.
    #
    # Note that some configuration settings that could be done previously
    # in this file, now are automatically configured by the server and settings
    # here are ignored.
    #
    # If you have edited this file but would like it to be automatically updated
    # again, run the following command:
    #   sudo dpkg-reconfigure -phigh xserver-xorg
    
    Section "Device"
    	Identifier	"Configured Video Device"
    EndSection
    
    Section "Monitor"
    	Identifier	"Configured Monitor"
    EndSection
    
    Section "Screen"
    	Identifier	"Default Screen"
    	Monitor		"Configured Monitor"
    	Device		"Configured Video Device"
    EndSection

  2. #2
    Join Date
    Jun 2007
    Beans
    14,793

    Re: Slow or none 3D Performance on Compaq(HP) 6510b

    Can you post /var/log/Xorg.0.log ?

  3. #3
    Join Date
    Oct 2008
    Location
    Malmö, Sweden
    Beans
    16
    Distro
    Ubuntu Development Release

    Re: Slow or none 3D Performance on Compaq(HP) 6510b

    Quote Originally Posted by Temüjin View Post
    Can you post /var/log/Xorg.0.log ?
    Hi, thanx for you're reply. Found 4 loggs so i give you them all more info the better

    My friend got the same pc aswell and he got the same problems but i remember that in the Ubuntu 8.04 i had no problems with 3D execpt pc freezing when closing the lid other than that it worked better than in 8.10

    Best Regards
    Commander

    log 0
    Code:
    X.Org X Server 1.5.2
    Release Date: 10 October 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu
    Current Operating System: Linux ubuntu 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64
    Build Date: 24 October 2008  09:06:49AM
    xorg-server 2:1.5.2-2ubuntu3 (buildd@crested.buildd) 
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Fri Mar 13 01:08:21 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section.  Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) |   |-->Monitor "Configured Monitor"
    (**) |   |-->Device "Configured Video Device"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified.  Using compiled-in default.
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/100dpi/:unscaled,
    	/usr/share/fonts/X11/75dpi/:unscaled,
    	/usr/share/fonts/X11/Type1,
    	/usr/share/fonts/X11/100dpi,
    	/usr/share/fonts/X11/75dpi,
    	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x7b7320
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 4.1
    	X.Org XInput driver : 2.1
    	X.Org Server Extension : 1.1
    	X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4600000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4700000/1048576
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) LoadModule: "extmod"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    
    (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.5.2, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
    (II) Matched intel from file name intel.ids
    (==) Matched intel for the autoconfigured driver
    (==) Assigned the driver to the xf86ConfigLayout
    (II) LoadModule: "intel"
    
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    	965GM, 965GME/GLE, G33, Q35, Q33,
    	Mobile Intel® GM45 Express Chipset,
    	Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): Creating default Display subsection in Screen section
    	"Default Screen" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (==) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xE4600000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Configured Monitor
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000203 to 0x00000000
    (WW) intel(0): PIPEASTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
    (WW) intel(0): PIPEASTAT after: status:
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000206 to 0x80000206
    (WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x100000c0 to 0x000c0000
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) intel(0): Kernel reported 489216 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1956860 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: open result is -1, (No such device or address)
    drmOpenDevice: Open failed
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] loaded kernel module for "i915" driver.
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xe4600000
    (II) intel(0): [drm] ring buffer = 0xd0000000
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
    (II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
    (II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
    (II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000:            end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 303 x 190
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.0.99
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.15.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.15.2
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (**) Option "Device" "/dev/input/event7"
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) AT Translated Set 2 keyboard: xkb_layout: "se"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Video Bus: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) Video Bus: xkb_layout: "se"
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (EE) intel(0): underrun on pipe B!
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    log 1
    Code:
    X.Org X Server 1.5.2
    Release Date: 10 October 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu
    Current Operating System: Linux ubuntu 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64
    Build Date: 24 October 2008  09:06:49AM
    xorg-server 2:1.5.2-2ubuntu3 (buildd@crested.buildd) 
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.1.log", Time: Wed Feb 11 10:30:46 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section.  Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) |   |-->Monitor "Configured Monitor"
    (**) |   |-->Device "Configured Video Device"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified.  Using compiled-in default.
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/100dpi/:unscaled,
    	/usr/share/fonts/X11/75dpi/:unscaled,
    	/usr/share/fonts/X11/Type1,
    	/usr/share/fonts/X11/100dpi,
    	/usr/share/fonts/X11/75dpi,
    	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x7b7320
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 4.1
    	X.Org XInput driver : 2.1
    	X.Org Server Extension : 1.1
    	X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 9
    
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4600000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4700000/1048576
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) LoadModule: "extmod"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    
    (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.5.2, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
    (II) Matched intel from file name intel.ids
    (==) Matched intel for the autoconfigured driver
    (==) Assigned the driver to the xf86ConfigLayout
    (II) LoadModule: "intel"
    
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    	965GM, 965GME/GLE, G33, Q35, Q33,
    	Mobile Intel® GM45 Express Chipset,
    	Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): Creating default Display subsection in Screen section
    	"Default Screen" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (==) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xE4600000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Configured Monitor
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing on
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) intel(0): Kernel reported 489216 total, 16130 used
    (II) intel(0): I830CheckAvailableMemory: 1892344 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.0
    (EE) [drm] Could not set DRM device bus ID.
    (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Failed
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 304 x 190
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.0.99
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.15.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.15.2
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (**) Option "Device" "/dev/input/event7"
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) AT Translated Set 2 keyboard: xkb_layout: "se"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Video Bus: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) Video Bus: xkb_layout: "se"
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (EE) intel(0): underrun on pipe B!
    AUDIT: Wed Feb 11 10:30:52 2009: 1521 X: client 4 rejected from local host ( uid=0 gid=0 pid=1621 )
    AUDIT: Wed Feb 11 10:31:03 2009: 1521 X: client 4 rejected from local host ( uid=0 gid=0 pid=1719 )
    AUDIT: Wed Feb 11 10:31:06 2009: 1521 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=1745 )
    AUDIT: Wed Feb 11 10:31:06 2009: 1521 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=1746 )
    AUDIT: Wed Feb 11 10:31:06 2009: 1521 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=1747 )
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) Macintosh mouse button emulation: Device reopened after 10 attempts.
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) AT Translated Set 2 keyboard: Device reopened after 10 attempts.
    (II) Video Bus: Device reopened after 10 attempts.
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "synaptics"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    Log 2
    Code:
    X.Org X Server 1.5.2
    Release Date: 10 October 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu
    Current Operating System: Linux ubuntu 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64
    Build Date: 24 October 2008  09:06:49AM
    xorg-server 2:1.5.2-2ubuntu3 (buildd@crested.buildd) 
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.1.log", Time: Wed Feb 11 10:30:46 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section.  Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) |   |-->Monitor "Configured Monitor"
    (**) |   |-->Device "Configured Video Device"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified.  Using compiled-in default.
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/100dpi/:unscaled,
    	/usr/share/fonts/X11/75dpi/:unscaled,
    	/usr/share/fonts/X11/Type1,
    	/usr/share/fonts/X11/100dpi,
    	/usr/share/fonts/X11/75dpi,
    	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x7b7320
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 4.1
    	X.Org XInput driver : 2.1
    	X.Org Server Extension : 1.1
    	X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 9
    
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4600000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4700000/1048576
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) LoadModule: "extmod"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    
    (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.5.2, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
    (II) Matched intel from file name intel.ids
    (==) Matched intel for the autoconfigured driver
    (==) Assigned the driver to the xf86ConfigLayout
    (II) LoadModule: "intel"
    
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    	965GM, 965GME/GLE, G33, Q35, Q33,
    	Mobile Intel® GM45 Express Chipset,
    	Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): Creating default Display subsection in Screen section
    	"Default Screen" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (==) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xE4600000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Configured Monitor
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xd0000009 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing on
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00012d2d to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00009696 to 0x00014141
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) intel(0): Kernel reported 489216 total, 16130 used
    (II) intel(0): I830CheckAvailableMemory: 1892344 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.0
    (EE) [drm] Could not set DRM device bus ID.
    (EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Failed
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    (II) AIGLX: Screen 0 is not DRI capable
    (II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
    (II) GLX: Initialized DRISWRAST GL provider for screen 0
    (II) intel(0): Setting screen physical size to 304 x 190
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.0.99
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.15.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.15.2
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (**) Option "Device" "/dev/input/event7"
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) AT Translated Set 2 keyboard: xkb_layout: "se"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Video Bus: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) Video Bus: xkb_layout: "se"
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (EE) intel(0): underrun on pipe B!
    AUDIT: Wed Feb 11 10:30:52 2009: 1521 X: client 4 rejected from local host ( uid=0 gid=0 pid=1621 )
    AUDIT: Wed Feb 11 10:31:03 2009: 1521 X: client 4 rejected from local host ( uid=0 gid=0 pid=1719 )
    AUDIT: Wed Feb 11 10:31:06 2009: 1521 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=1745 )
    AUDIT: Wed Feb 11 10:31:06 2009: 1521 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=1746 )
    AUDIT: Wed Feb 11 10:31:06 2009: 1521 X: client 4 rejected from local host ( uid=1000 gid=1000 pid=1747 )
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.30  1280 1328 1360 1405  800 803 809 822 -hsync -vsync (49.3 kHz)
    (II) intel(0): EDID vendor "LPL", prod id 36096
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) Macintosh mouse button emulation: Device reopened after 10 attempts.
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) AT Translated Set 2 keyboard: Device reopened after 10 attempts.
    (II) Video Bus: Device reopened after 10 attempts.
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) intel(0): xf86UnbindGARTMemory: unbind key 4
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "synaptics"
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    Log 0 old
    Code:
    X.Org X Server 1.5.2
    Release Date: 10 October 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.24-16-server x86_64 Ubuntu
    Current Operating System: Linux ubuntu 2.6.27-11-generic #1 SMP Thu Jan 29 19:28:32 UTC 2009 x86_64
    Build Date: 24 October 2008  09:06:49AM
    xorg-server 2:1.5.2-2ubuntu3 (buildd@crested.buildd) 
    	Before reporting problems, check http://wiki.x.org
    	to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    	(++) from command line, (!!) notice, (II) informational,
    	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Thu Mar 12 15:22:17 2009
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) No Layout section.  Using the first Screen section.
    (**) |-->Screen "Default Screen" (0)
    (**) |   |-->Monitor "Configured Monitor"
    (**) |   |-->Device "Configured Video Device"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) No FontPath specified.  Using compiled-in default.
    (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
    	Entry deleted from font path.
    (==) FontPath set to:
    	/usr/share/fonts/X11/misc,
    	/usr/share/fonts/X11/100dpi/:unscaled,
    	/usr/share/fonts/X11/75dpi/:unscaled,
    	/usr/share/fonts/X11/Type1,
    	/usr/share/fonts/X11/100dpi,
    	/usr/share/fonts/X11/75dpi,
    	/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (II) Cannot locate a core pointer device.
    (II) Cannot locate a core keyboard device.
    (II) The server relies on HAL to provide the list of input devices.
    	If no devices become available, reconfigure HAL or disable AllowEmptyInput.
    (II) Open ACPI successful (/var/run/acpid.socket)
    (II) Loader magic: 0x7b7320
    (II) Module ABI versions:
    	X.Org ANSI C Emulation: 0.4
    	X.Org Video Driver: 4.1
    	X.Org XInput driver : 2.1
    	X.Org Server Extension : 1.1
    	X.Org Font Renderer : 0.6
    (II) Loader running on linux
    (++) using VT number 7
    
    (--) PCI:*(0@0:2:0) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4600000/1048576, 0xd0000000/268435456, I/O @ 0x00004000/8
    (--) PCI: (0@0:2:1) Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller rev 12, Mem @ 0xe4700000/1048576
    (II) System resource ranges:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) LoadModule: "extmod"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension XFree86-DGA
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "dbe"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "glx"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (==) AIGLX enabled
    (==) Exporting typical set of GLX visuals
    (II) Loading extension GLX
    (II) LoadModule: "freetype"
    
    (II) Loading /usr/lib/xorg/modules//fonts/libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    	compiled for 1.5.2, module version = 2.1.0
    	Module class: X.Org Font Renderer
    	ABI class: X.Org Font Renderer, version 0.6
    (II) Loading font FreeType
    (II) LoadModule: "record"
    
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.13.0
    	Module class: X.Org Server Extension
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Server Extension, version 1.1
    (II) Loading extension XFree86-DRI
    (II) Scanning /usr/share/xserver-xorg/pci directory for additional PCI ID's supported by the drivers
    (II) Matched intel from file name intel.ids
    (==) Matched intel for the autoconfigured driver
    (==) Assigned the driver to the xf86ConfigLayout
    (II) LoadModule: "intel"
    
    (II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
    (II) Module intel: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.1
    	Module class: X.Org Video Driver
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    	i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
    	E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
    	965GM, 965GME/GLE, G33, Q35, Q33,
    	Mobile Intel® GM45 Express Chipset,
    	Intel Integrated Graphics Device, G45/G43, Q45/Q43
    (II) Primary Device is: PCI 00@00:02:0
    (II) resource ranges after xf86ClaimFixedResources() call:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[5] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    (II) resource ranges after probing:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Loading /usr/lib/xorg/modules//libint10.so
    (II) Module int10: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vbe"
    (II) LoadModule: "vbe"
    
    (II) Loading /usr/lib/xorg/modules//libvbe.so
    (II) Module vbe: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "vgahw"
    (II) LoadModule: "vgahw"
    
    (II) Loading /usr/lib/xorg/modules//libvgahw.so
    (II) Module vgahw: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.1.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) intel(0): Creating default Display subsection in Screen section
    	"Default Screen" for depth/fbbpp 24/32
    (==) intel(0): Depth 24, (==) framebuffer bpp 32
    (==) intel(0): RGB weight 888
    (==) intel(0): Default visual is TrueColor
    (II) intel(0): Integrated Graphics Chipset: Intel(R) 965GM
    (--) intel(0): Chipset: "965GM"
    (--) intel(0): Linear framebuffer at 0xD0000000
    (--) intel(0): IO registers at addr 0xE4600000
    (II) intel(0): 2 display pipes available.
    (==) intel(0): Using EXA for acceleration
    (II) Loading sub module "int10"
    (II) LoadModule: "int10"
    
    (II) Reloading /usr/lib/xorg/modules//libint10.so
    (II) intel(0): initializing int10
    (WW) intel(0): Bad V_BIOS checksum
    (II) intel(0): Primary V_BIOS segment is: 0xc000
    (II) intel(0): VESA BIOS detected
    (II) intel(0): VESA VBE Version 3.0
    (II) intel(0): VESA VBE Total Mem: 7616 kB
    (II) intel(0): VESA VBE OEM: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
    (II) intel(0): VESA VBE OEM Software Rev: 1.0
    (II) intel(0): VESA VBE OEM Vendor: Intel Corporation
    (II) intel(0): VESA VBE OEM Product: Intel(r)GM965/PM965/GL960 Graphics Controller
    (II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
    (II) Loading sub module "ddc"
    (II) LoadModule: "ddc"
    (II) Module "ddc" already built-in
    (II) Loading sub module "i2c"
    (II) LoadModule: "i2c"
    (II) Module "i2c" already built-in
    (II) intel(0): Output VGA using monitor section Configured Monitor
    (II) intel(0): I2C bus "CRTDDC_A" initialized.
    (II) intel(0): Output LVDS has no monitor section
    (II) intel(0): I2C bus "LVDSDDC_C" initialized.
    (II) intel(0): Attempting to determine panel fixed mode.
    (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
    (II) intel(0): Output TV has no monitor section
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Output VGA disconnected
    (II) intel(0): Output LVDS connected
    (II) intel(0): Output TV disconnected
    (II) intel(0): Using exact sizes for initial modes
    (II) intel(0): Output LVDS using initial mode 1280x800
    (II) intel(0): Monitoring connected displays enabled
    (II) intel(0): detected 512 kB GTT.
    (II) intel(0): detected 7676 kB stolen memory.
    (==) intel(0): video overlay key set to 0x101fe
    (==) intel(0): Will not try to enable page flipping
    (==) intel(0): Triple buffering disabled
    (==) intel(0): Intel XvMC decoder disabled
    (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
    (==) intel(0): DPI set to (96, 96)
    (II) Loading sub module "fb"
    (II) LoadModule: "fb"
    
    (II) Loading /usr/lib/xorg/modules//libfb.so
    (II) Module fb: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 1.0.0
    	ABI class: X.Org ANSI C Emulation, version 0.4
    (II) Loading sub module "exa"
    (II) LoadModule: "exa"
    
    (II) Loading /usr/lib/xorg/modules//libexa.so
    (II) Module exa: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.4.0
    	ABI class: X.Org Video Driver, version 4.1
    (II) Loading sub module "ramdac"
    (II) LoadModule: "ramdac"
    (II) Module "ramdac" already built-in
    (II) intel(0): Comparing regs from server start up to After PreInit
    (WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
    (WW) intel(0): PP_STATUS before: on, ready, sequencing idle
    (WW) intel(0): PP_STATUS after: on, ready, sequencing on
    (WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x00000400
    (WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00020206 to 0x80020206
    (WW) intel(0): PIPEBSTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VBLANK_INT_ENABLE VSYNC_INT_STATUS SVBLANK_INT_STATUS VBLANK_INT_STATUS
    (WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x00000000 to 0x000c0000
    (WW) intel(0): Register 0x68004 (TV_DAC) changed from 0x00000000 to 0x70000000
    (WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
    (WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
    (WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
    (WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
    (WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
    (WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
    (WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
    (WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
    (WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
    (WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
    (WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
    (WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
    (WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
    (WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
    (WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
    (WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
    (WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
    (WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
    (WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
    (WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
    (WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
    (WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
    (WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
    (WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
    (WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
    (WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
    (==) Depth 24 pixmap format is 32 bpp
    (II) do I need RAC?  No, I don't.
    (II) resource ranges after preInit:
    	[0] -1	0	0xffffffff - 0xffffffff (0x1) MX[B]
    	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
    	[2] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
    	[3] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
    	[4] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
    	[5] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
    	[6] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
    	[7] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
    	[8] -1	0	0x00000000 - 0x00000000 (0x1) IX[B]
    	[9] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
    	[10] 0	0	0x000003c0 - 0x000003df (0x20) IS[B](OprU)
    (II) intel(0): Kernel reported 489216 total, 1 used
    (II) intel(0): I830CheckAvailableMemory: 1956860 kB available
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 11, (OK)
    drmOpenByBusid: drmOpenMinor returns 11
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) [drm] DRM interface version 1.3
    (II) [drm] DRM open master succeeded.
    (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
    (II) intel(0): [drm] framebuffer mapped by ddx driver
    (II) intel(0): [drm] added 1 reserved context for kernel
    (II) intel(0): X context handle = 0x1
    (II) intel(0): [drm] installed DRM signal handler
    (**) intel(0): Framebuffer compression disabled
    (**) intel(0): Tiling enabled
    (==) intel(0): VideoRam: 262144 KB
    (II) intel(0): Attempting memory allocation with tiled buffers.
    (II) intel(0): Tiled allocation successful.
    (II) intel(0): [drm] Registers = 0xe4600000
    (II) intel(0): [drm] ring buffer = 0xd0000000
    (II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
    (II) intel(0): [drm] mapped back buffer at 0xd1a00000, handle = 0xd1a00000
    (II) intel(0): [drm] mapped depth buffer at 0xd2040000, handle = 0xd2040000
    (II) intel(0): [drm] mapped classic textures at 0xd2680000, handle = 0xd2680000
    (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
    (II) intel(0): [dri] visual configs initialized
    (II) intel(0): Page Flipping disabled
    (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
    (II) EXA(0): Offscreen pixmap area of 19660800 bytes
    (II) EXA(0): Driver registered support for the following operations:
    (II)         Solid
    (II)         Copy
    (II)         Composite (RENDER acceleration)
    (==) intel(0): Backing store disabled
    (==) intel(0): Silken mouse enabled
    (II) intel(0): Initializing HW Cursor
    (II) intel(0): [DRI] installation complete
    (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x0077f000 (pgoffset 1919)
    (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x01a00000 (pgoffset 6656)
    (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x02040000 (pgoffset 8256)
    (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02680000 (pgoffset 9856)
    (II) intel(0): Fixed memory allocation layout:
    (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
    (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
    (II) intel(0): 0x0002a000-0x00031fff: logical 3D context (32 kB)
    (II) intel(0): 0x00032000-0x00043fff: exa G965 state buffer (72 kB)
    (II) intel(0): 0x00044000-0x00044fff: overlay registers (4 kB)
    (II) intel(0): 0x00045000-0x00045fff: power context (4 kB)
    (II) intel(0): 0x00100000-0x0073ffff: front buffer (6400 kB) X tiled
    (II) intel(0): 0x00740000-0x019fffff: exa offscreen (19200 kB)
    (II) intel(0): 0x0077f000:            end of stolen memory
    (II) intel(0): 0x01a00000-0x0203ffff: back buffer (6400 kB) X tiled
    (II) intel(0): 0x02040000-0x0267ffff: depth buffer (6400 kB) Y tiled
    (II) intel(0): 0x02680000-0x0467ffff: classic textures (32768 kB)
    (II) intel(0): 0x10000000:            end of aperture
    (WW) intel(0): ESR is 0x00000001
    (WW) intel(0): Existing errors found in hardware state.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): Output configuration:
    (II) intel(0):   Pipe A is off
    (II) intel(0):   Display plane A is now disabled and connected to pipe A.
    (II) intel(0):   Pipe B is on
    (II) intel(0):   Display plane B is now enabled and connected to pipe B.
    (II) intel(0):   Output VGA is connected to pipe none
    (II) intel(0):   Output LVDS is connected to pipe B
    (II) intel(0):   Output TV is connected to pipe none
    (II) intel(0): [drm] dma control initialized, using IRQ 16
    (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    (II) intel(0): using SSC reference clock of 100 MHz
    (II) intel(0): Selecting standard 18 bit TMDS pixel format.
    (II) intel(0): DPMS enabled
    (II) intel(0): Set up textured video
    (II) intel(0): Set up overlay video
    (II) intel(0): direct rendering: Enabled
    (--) RandR disabled
    (II) Initializing built-in extension MIT-SHM
    (II) Initializing built-in extension XInputExtension
    (II) Initializing built-in extension XTEST
    (II) Initializing built-in extension XKEYBOARD
    (II) Initializing built-in extension XC-APPGROUP
    (II) Initializing built-in extension SECURITY
    (II) Initializing built-in extension XINERAMA
    (II) Initializing built-in extension XFIXES
    (II) Initializing built-in extension RENDER
    (II) Initializing built-in extension RANDR
    (II) Initializing built-in extension COMPOSITE
    (II) Initializing built-in extension DAMAGE
    (II) Initializing built-in extension XEVIE
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    drmOpenDevice: node name is /dev/dri/card0
    drmOpenDevice: open result is 12, (OK)
    drmOpenByBusid: drmOpenMinor returns 12
    drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
    (II) AIGLX: Loaded and initialized /usr/lib/dri/i965_dri.so
    (II) GLX: Initialized DRI GL provider for screen 0
    (II) intel(0): Setting screen physical size to 303 x 190
    (II) config/hal: Adding input device Macintosh mouse button emulation
    (II) LoadModule: "evdev"
    
    (II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
    (II) Module evdev: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 2.0.99
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (**) Macintosh mouse button emulation: always reports core events
    (**) Macintosh mouse button emulation: Device: "/dev/input/event0"
    (II) Macintosh mouse button emulation: Found x and y relative axes
    (II) Macintosh mouse button emulation: Found 3 mouse buttons
    (II) Macintosh mouse button emulation: Configuring as mouse
    (II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
    (**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
    (**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
    (II) LoadModule: "synaptics"
    
    (II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
    (II) Module synaptics: vendor="X.Org Foundation"
    	compiled for 1.5.2, module version = 0.15.2
    	Module class: X.Org XInput Driver
    	ABI class: X.Org XInput driver, version 2.1
    (II) Synaptics touchpad driver version 0.15.2
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (**) Option "Device" "/dev/input/event7"
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (**) SynPS/2 Synaptics TouchPad: always reports core events
    (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    (--) SynPS/2 Synaptics TouchPad touchpad found
    (II) config/hal: Adding input device AT Translated Set 2 keyboard
    (**) AT Translated Set 2 keyboard: always reports core events
    (**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
    (II) AT Translated Set 2 keyboard: Found keys
    (II) AT Translated Set 2 keyboard: Configuring as keyboard
    (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) AT Translated Set 2 keyboard: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) AT Translated Set 2 keyboard: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) AT Translated Set 2 keyboard: xkb_layout: "se"
    (II) config/hal: Adding input device Video Bus
    (**) Video Bus: always reports core events
    (**) Video Bus: Device: "/dev/input/event5"
    (II) Video Bus: Found keys
    (II) Video Bus: Configuring as keyboard
    (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    (**) Option "xkb_rules" "evdev"
    (**) Video Bus: xkb_rules: "evdev"
    (**) Option "xkb_model" "pc105"
    (**) Video Bus: xkb_model: "pc105"
    (**) Option "xkb_layout" "se"
    (**) Video Bus: xkb_layout: "se"
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (II) intel(0): Printing DDC gathered Modelines:
    (II) intel(0): Modeline "1280x800"x0.0   69.29  1280 1319 1345 1410  800 802 806 819 -hsync -vsync (49.1 kHz)
    (II) intel(0): EDID vendor "CMO", prod id 5156
    (EE) intel(0): underrun on pipe B!
    AUDIT: Thu Mar 12 15:22:23 2009: 29625 X: client 4 rejected from local host ( uid=0 gid=0 pid=29652 )
    (II) Macintosh mouse button emulation: Close
    (II) UnloadModule: "evdev"
    (II) UnloadModule: "synaptics"
    (II) AT Translated Set 2 keyboard: Close
    (II) UnloadModule: "evdev"
    (II) Video Bus: Close
    (II) UnloadModule: "evdev"
    (II) intel(0): xf86UnbindGARTMemory: unbind key 0
    (II) intel(0): xf86UnbindGARTMemory: unbind key 1
    (II) intel(0): xf86UnbindGARTMemory: unbind key 2
    (II) intel(0): xf86UnbindGARTMemory: unbind key 3
    (II) intel(0): [drm] removed 1 reserved context for kernel
    (II) intel(0): [drm] unmapping 8192 bytes of SAREA 0x1efff000 at 0x7ffd18588000
    (II) intel(0): [drm] Closed DRM master.

  4. #4
    Join Date
    Oct 2008
    Location
    Malmö, Sweden
    Beans
    16
    Distro
    Ubuntu Development Release

    Re: Slow or none 3D Performance on Compaq(HP) 6510b

    Anyone ?

  5. #5
    Join Date
    Jul 2008
    Beans
    66

    Re: Slow or none 3D Performance on Compaq(HP) 6510b

    1. What are your computer specs? Did you answer that in your post, crap I forgot, if you did, ignore this question

    2. It could be you have an old version of compiz

    3. are you using an open-source or restricted driver? sometimes you just have to suck it up, and go for proprietary

    4. what's the output of this terminal command?


    glxinfo | grep rendering

    try in this order:
    4
    1
    3
    2

  6. #6
    Join Date
    Oct 2008
    Location
    Malmö, Sweden
    Beans
    16
    Distro
    Ubuntu Development Release

    Re: Slow or none 3D Performance on Compaq(HP) 6510b

    Intel Core 2 Centrino 1.8Ghz
    2x 2gb 677mhz
    Intel 965GM

  7. #7
    Join Date
    Jul 2008
    Beans
    66

    Re: Slow or none 3D Performance on Compaq(HP) 6510b

    exact same stats as me, same graphics card too, but my graphics just work out of the box. the again if you have the same computer I do, Toshiba? , you don't really have a graphics card, just a media accelerator, but that still should wobble the windows, and spin the cube.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •