Results 1 to 7 of 7

Thread: Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

  1. #1
    Join Date
    Jan 2009
    Beans
    3

    Question Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    Greetings:

    I installed Ubuntu 8.10 and MythBuntu on top of it in my media center pc. So far everything works except the remote control. I have a Hauppauge PVR-150, with a Media Center Remote Control (Gray/Silver Ish Color with light gray keys).

    I have tried setting up the Lirc System with the "Mythbuntu Control Center" as well as custom lircd.conf files that i've found searching on the net. So far, no success, I've tried checking if the remote does any effect on MythTV and in XBMC, as well as in the IRW command (which does not return anything at all).

    The only way I have of knowing that the system is actually registering a command is because I get some output when I press a remote key with the following command:
    Code:
    sudo cat /dev/lirc0
    Here's my system info:

    Daemon Log File Grepped with Lirc (http://pastebin.com/f1ef8986a)

    SysLog Grepped with lirc (http://pastebin.com/f45fb9e82)

    dmesg: (http://pastebin.com/f15582222)

    lircd.conf: (http://pastebin.com/f1cf3fb7b)

    hardware.conf: (http://pastebin.com/f64f62dc6)

    lircd.conf.hauppauge_pvr150: (http://pastebin.com/f697c72c0)

    general.conf: (http://pastebin.com/f6a1c65e2)

    Do you guys have any other idea of what can I do to make it work? I'm kinda desperate since i've been trying for a week already.

    Thanks in advance!!!

    -DarkJZ

  2. #2
    Join Date
    Jun 2008
    Location
    Canada
    Beans
    218
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    These instructions are all for the PVR-150 MCE KIT which includes the remote, SMK USB dongle, 1 - emitter and the red, white, yellow rca and one svideo input on the actual pvr-150 card.

    Can you find and post a link to a picture of the remote you are referring. Is it the one, with SMK USB Dongle and the M$ style remote control with the black back and no color keys. If it is then

    sudo modprobe lirc_mceusb2

    You need to set your remote to MCE new version et all for both transmitter and remote. then you can copy this file into your /etc/lirc/lircd.conf make sure and back up your old one first and then edit the hardware.conf file and change the remote lircd location to /etc/lircd.conf and if there is an address in the remote lircd location in the transmitter section remove it so that it just ieft with the quotes like so ""

    The modules you should be loading are

    modeules = "lirc_dev lirc_mceusb2"
    Device = /dev/lirc0

    output from ls -l /dev/lirc* should be

    /dev/lirc0
    /dev/lircd

    output from lsmod | grep lirc should be

    lirc_mceusb2
    lirc/dev
    the third line you should see a bunch of modules and it will include these as well.

    dmesg | grep -i lirc

    should tell you it is loading your usb module as 1st philips ehome transceiver and then a little further down it should say loading SMK and then registering interface and lirc_mceusb2 as well. This is not exact but you get the picure.


    Lircd.conf

    Code:
    # Please make this file available to others
    # by sending it to <lirc@bartelmus.de>
    #
    # this config file was automatically generated
    # using lirc-0.8.4a(default) on Mon Feb 23 23:55:04 2009
    #
    # contributed by 
    #
    # brand:                       /home/xbmc/haumce.conf
    # model no. of remote control: 
    # devices being controlled by this remote:
    #
    
    begin remote
    
      name  mceusb
      bits           13
      flags RC6|CONST_LENGTH
      eps            30
      aeps          100
    
      header       2674   870
      one           455   427
      zero          455   427
      pre_data_bits   24
      pre_data       0x1BFF82
      gap          106288
      min_repeat      1
      toggle_bit_mask 0x8000
      rc6_mask    0x100000000
    
          begin codes
              TV                       0x1BB9
              Music                    0x1BB8
              Pictures                 0x1BB6
              Videos                   0x1BB5
              Power                    0x1BF3
              Stop                     0x1BE6
              Record                   0x1BE8
              Pause                    0x1BE7
              Play                     0x1BE9
              Rewind                   0x1BEA
              Foward                   0x1BEB
              Replay                   0x1BE4
              Skip                     0x1BE5
              Back                     0x1BDC
              More                     0x1BF0
              Up                       0x1BE1
              Left                     0x1BDF
              Right                    0x1BDE
              OK                       0x1BDD
              Down                     0x1BE0
              VolUp                    0x1BEF
              VolDown                  0x1BEE
              Home                     0x1BF2
              ChanDown                 0x1BED
              ChanUp                   0x1BEC
              Mute                     0x1BF1
              RecTV                    0x1BB7
              Guide                    0x1BD9
              LiveTV                   0x1BDA
              DVD                      0x1BDB
              One                      0x1BFE
              Two                      0x1BFD
              Three                    0x1BFC
              Four                     0x1BFB
              Five                     0x1BFA
              Six                      0x1BF9
              Seven                    0x1BF8
              Eight                    0x1BF7
              Nine                     0x1BF6
              Star                     0x1BE2
              Zero                     0x1BFF
              Hash                     0x1BE3
              Clear                    0x1BF5
              Enter                    0x1BF4
          end codes
    
    end remote
    Hope it helps.

    Dave

  3. #3
    Join Date
    Jan 2009
    Beans
    3

    Question Re: Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    Thank you for your response Dave (rodercot). I modified the hardware.conf file to load lirc_mceusb2 (it previously stated lirc_pvr150), and after resbooting I verfied all the outputs you mentioned and they were correct (modules, ls of /dev, etc) also applied your lircd.conf file.

    However, the problem remains the same ... when I type the irw command and press buttons from my remote, it does not do anything at all. I know the remote is sending commands because my Xbox360 is right next to the IR Receiver and the xbox responds to the commands (as well as the IR Receiver turns on a nice little red led when he sees any IR Commands).

    I have have attached an image of the product of this nightmare.

    Any other suggestions? Anything at all will be appreciated.

    Regards,


    Raul (DarkJZ)

    Edit: By the way! I forgot to mention! I'm running Ubuntu 8.10 x64 Bits and installed via Synaptic MythBuntu-Desktop and lirc.
    Attached Images Attached Images
    Last edited by darkjz; February 26th, 2009 at 01:03 PM. Reason: Added additional info.

  4. #4
    Join Date
    Jun 2008
    Location
    Canada
    Beans
    218
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    can you post this for me.

    /etc/lirc/hardware.conf
    lirc --version
    dmesg | grep -i lirc
    lsmod | grep lirc



    I hope that the version you are running is not affected by the way we are setting this up. I looked through my lirc sources and I do not even have a lirc_pvr150, but I am pretty sure that driver may be unique anyhow.

    Once you post those I will have a better idea.

    Here is another lircd files you can try. with this one I have combined the generic mceusb file and dish general conf in one. This is the default that lirc sets up for a mceusb remote. if this does not work then an irrecord is likely the easiest way to get it going. using this lircd then you need to edit the trasmitters section of the hardware.conf file. to read

    name = custom
    modules = lirc_dev lirc_mceusb2
    device = ""
    driver = ""
    lircd = ""

    Code:
    #
    # RC-6 config file
    #
    # source: http://home.hccnet.nl/m.majoor/projects__remote_control.htm
    #         http://home.hccnet.nl/m.majoor/pronto.pdf
    #
    # used by: Philips
    #
    #########
    #
    # Philips Media Center Edition remote control
    # For use with the USB MCE ir receiver
    #
    # Dan Conti  dconti|acm.wwu.edu
    #
    # Updated with codes for MCE 2005 Remote additional buttons
    # *, #, Teletext, Red, Green, Yellow & Blue Buttons
    # Note: TV power button transmits no code until programmed.
    # Updated 12th September 2005
    # Graham Auld - mce|graham.auld.me.uk
    #
    # Radio, Print, RecTV are only available on the HP Media Center remote control
    #
    
    begin remote
    
      name mceusb
      bits           16
      flags RC6|CONST_LENGTH
      eps            30
      aeps          100
    
      header       2667   889
      one           444   444
      zero          444   444
      pre_data_bits 21
      pre_data      0x37FF0
      gap          105000
      toggle_bit     22
      rc6_mask     0x100000000
    
    
          begin codes
    
            Blue    0x00007ba1
            Yellow  0x00007ba2
            Green   0x00007ba3
            Red     0x00007ba4
            Teletext        0x00007ba5
    
    # starts at af
            Radio    0x00007baf
            Print    0x00007bb1
            Videos   0x00007bb5
            Pictures 0x00007bb6
            RecTV    0x00007bb7
            Music    0x00007bb8
            TV       0x00007bb9
    # no ba - d8
    
            Guide    0x00007bd9
            LiveTV   0x00007bda
            DVD      0x00007bdb
            Back     0x00007bdc
            OK       0x00007bdd
            Right    0x00007bde
            Left     0x00007bdf
            Down     0x00007be0
            Up       0x00007be1
    
            Star       0x00007be2
            Hash       0x00007be3
    
            Replay   0x00007be4
            Skip     0x00007be5
            Stop     0x00007be6
            Pause    0x00007be7
            Record   0x00007be8
            Play     0x00007be9
            Rewind   0x00007bea
            Forward  0x00007beb
            ChanDown 0x00007bec
            ChanUp   0x00007bed
            VolDown  0x00007bee
            VolUp    0x00007bef
            More     0x00007bf0
            Mute     0x00007bf1
            Home     0x00007bf2
            Power    0x00007bf3
            Enter    0x00007bf4
            Clear    0x00007bf5
            Nine     0x00007bf6
            Eight    0x00007bf7
            Seven    0x00007bf8
            Six      0x00007bf9
            Five     0x00007bfa
            Four     0x00007bfb
            Three    0x00007bfc
            Two      0x00007bfd
            One      0x00007bfe
            Zero     0x00007bff
          end codes
    
    end remote
    
    # This config file is based on the information posted by Endaf Jones at
    # http://www.gossamer-threads.com/lists/mythtv/users/196566#196566
    #
    # brand:                       JVC/RCA
    # model no. of remote control:
    # supported devices:           Dish Network (Echostar)
    #                                - JVC 2700 receiver
    #                                - JVC 4700 receiver
    #                                - JVC 49xx receiver
    #                                - JVC 50xx receiver
    #                                - RCA 31x receiver
    #                              and several other Dish receivers using the
    #                              "blue button" remotes
    #
    # Unit code selection (1-16) is performed by specifying the appropriate
    # value for post_data
    #  1=0x000             2=0x200             3=0x100             4=0x300
    #  5=0x080             6=0x280             7=0x180             8=0x380
    #  9=0x040            10=0x240            11=0x140            12=0x340
    # 13=0x0C0            14=0x2C0            15=0x1C0            16=0x3C0
    #
    # Each has been implemented in this config file with the remote names "dish#"
    # where the hash/pound/number sign ("#") is a code number from 1 through 16.
    # There is also a remote called "dish" (without a number), for users with only
    # one receiver, that uses remote code 1 (DISH's default).
    #
    # The duty_cycle (the percentage of time during a pulse that infrared light is
    # being sent) is commented because some hardware transmitters don't support its
    # use.
    #
    # The discrete power functions (power_on and power_off) can be used to ensure
    # the power state of the receiver.  However, they probably shouldn't be used in
    # a channel change script as the receiver will require a significant delay
    # after a power_on before it is capable of receiving/responding to additional
    # commands (such as channel numbers).  Instead, assuming most of your recording
    # is during prime-time, you may want to set a cron job to run a "power_on"
    # command for each of your receivers about 5 or 10 minutes before primtetime.
    
    
    ### Remote definition for remotes using remote code 1 (0x000)
    begin remote
      name dish
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x000
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 1 (0x000)
    ### (Duplicated to allow a "dish" and a "dish1" remote name)
    begin remote
      name dish1
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x000
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 2 (0x200)
    begin remote
      name dish2
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x200
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 3 (0x100)
    begin remote
      name dish3
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x100
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 4 (0x300)
    begin remote
      name dish4
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x300
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 5 (0x080)
    begin remote
      name dish5
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x080
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 6 (0x280)
    begin remote
      name dish6
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x280
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 7 (0x180)
    begin remote
      name dish7
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x180
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 8 (0x380)
    begin remote
      name dish8
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x380
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 9 (0x040)
    begin remote
      name dish9
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x040
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 10 (0x240)
    begin remote
      name dish10
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x240
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 11 (0x140)
    begin remote
      name dish11
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x140
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 12 (0x340)
    begin remote
      name dish12
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x340
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 13 (0x0C0)
    begin remote
      name dish13
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x0C0
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 14 (0x2C0)
    begin remote
      name dish14
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x2C0
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 15 (0x1C0)
    begin remote
      name dish15
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x1C0
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    
    ### Remote definition for remotes using remote code 16 (0x3C0)
    begin remote
      name dish16
    
      flags SPACE_ENC|NO_HEAD_REP
      eps 30
      aeps 100
    
      frequency 56000
    #  duty_cycle 32
    
      one 440 1645
      zero 440 2780
    
      header 525 6045
      ptrail 450
      gap 6115
    
      min_repeat 6
    
      bits 6
      post_data_bits 10
    
      post_data 0x3C0
    
      begin codes
        info                               0
        power_on                           1
        power                              2
        1                                  4
        2                                  5
        3                                  6
        4                                  8
        5                                  9
        6                                  10
        7                                  12
        8                                  13
        9                                  14
        0                                  17
        menu                               11
        select                             16
        cancel                             18
        guide                              20
        view                               22
        tv_vcr                             23
        right                              24
        up                                 26
        recall                             27
        left                               28
        down                               30
        record                             31
        pause                              32
        stop                               33
        sys_info                           36
        asterisk                           37
        pound                              38
        power_off                          39
        sat                                41
        dish_home                          52
        sys_info2                          54
        dish_home2                         56
        dvr				       57
        skip_fwd			       55
        skip_back			       54
        fwd				       50
        play			       3
        back			       49
        dish			       52
        page_up			       15
        page_down			       7    
      end codes
    end remote
    Last edited by rodercot; February 26th, 2009 at 02:23 PM.

  5. #5
    Join Date
    Jan 2009
    Beans
    3

    Lightbulb [Solved] Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    Thanks for your help Dave!

    I checked the hardware.conf and there was the problem! Instead of being mostly empty as you said it showed the following:

    Code:
    REMOTE="Hauppauge TV card"
    TRANSMITTER="Hauppauge PVR-150 (pci) : Dish Receiver"
    REMOTE_MODULES="lirc_dev lirc_mceusb2"
    REMOTE_DRIVER=""
    REMOTE_DEVICE="/dev/lirc0"
    #REMOTE_LIRCD_CONF="hauppauge/lircd.conf.hauppauge_mce"
    REMOTE_LIRCD_ARGS=""
    TRANSMITTER_MODULES=""
    TRANSMITTER_DRIVER=""
    TRANSMITTER_DEVICE=""
    #TRANSMITTER_LIRCD_CONF="dish/general.conf"
    TRANSMITTER_LIRCD_ARGS=""
    START_LIRCD="true"
    START_LIRCMD=""
    LOAD_MODULES=""
    LIRCMD_CONF=""
    FORCE_NONINTERACTIVE_RECONFIGURATION="false"
    After commenting the references to /yet another/ lircd.conf and general.conf and applying the lircd.conf you sent in your previous post, it started working perfectly.

    Thanks for all your help!

    Regards,


    DarkJZ (Raul)
    Last edited by darkjz; February 26th, 2009 at 10:42 PM.

  6. #6
    Join Date
    Jun 2008
    Location
    Canada
    Beans
    218
    Distro
    Ubuntu 9.10 Karmic Koala

    Re: Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    Awesome, glad it helped out. Enjoy.

    Regards,

    Dave

  7. #7
    Join Date
    Jan 2006
    Location
    Zebulon
    Beans
    164
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: Lirc: U/Mythbuntu 8.10 + Hauppauge PVR 150 RC6 USB SMK eHOME Transceiver

    Sorry to resurrect this thread, but i'm having a problem with the same remote.

    darkjz.... if you would, please post all necessary *.conf files
    This APT has Super Cow Powers.
    If I'm not back in 5 minutes, just wait longer.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •