Code:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd@rothera) (gcc version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007fef0000 (usable)
[ 0.000000] BIOS-e820: 000000007fef0000 - 000000007fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007fef3000 - 000000007ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] DMI present.
[ 0.000000] Phoenix BIOS detected: BIOS may corrupt low RAM, working it around.
[ 0.000000] last_pfn = 0x7fef0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 3781f000 - 37fefc20
[ 0.000000] ACPI: RSDP 000F7760, 0024 (r2 HPQOEM)
[ 0.000000] ACPI: XSDT 7FEF30C0, 0054 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: FACP 7FEFA3C0, 00F4 (r3 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: DSDT 7FEF3280, 70EB (r1 HPQOEM SLIC-CPC 1000 MSFT 3000000)
[ 0.000000] ACPI: FACS 7FEF0000, 0040
[ 0.000000] ACPI: SLIC 7FEFA5C0, 0176 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: SSDT 7FEFA780, 02CC (r1 HPQOEM SLIC-CPC 1 LTP 1)
[ 0.000000] ACPI: HPET 7FEFAAC0, 0038 (r1 HPQOEM SLIC-CPC 42302E31 AWRD 98)
[ 0.000000] ACPI: MCFG 7FEFAB40, 003C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] ACPI: APIC 7FEFA500, 007C (r1 HPQOEM SLIC-CPC 42302E31 AWRD 0)
[ 0.000000] 1150MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==> [0000100000 - 00005c29e0]
[ 0.000000] #4 [003781f000 - 0037fefc20] RAMDISK ==> [003781f000 - 0037fefc20]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==> [00005c3000 - 00005c6000]
[ 0.000000] #6 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
[ 0.000000] found SMP MP-table at [c00f5b80] 000f5b80
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0007fef0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0007fef0
[ 0.000000] On node 0 totalpages: 523903
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 292050 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfefff000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 2, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519297
[ 0.000000] Kernel command line: root=UUID=e3bb9993-d18b-4125-a107-c930e85311e1 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PIT calibration value
[ 0.000000] Detected 2805.799 MHz processor.
[ 0.004000] spurious 8259A interrupt: IRQ7.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.004000] Memory: 2062368k/2096064k available (2576k kernel code, 32264k reserved, 1165k data, 424k init, 1178560k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.004000] hpet clockevent registered
[ 0.004000] Calibrating delay loop (skipped), value calculated using timer frequency.. 5611.59 BogoMIPS (lpj=11223196)
[ 0.004000] Security Framework initialized
[ 0.004000] SELinux: Disabled at boot.
[ 0.004000] AppArmor: AppArmor initialized
[ 0.004000] Mount-cache hash table entries: 512
[ 0.004000] Initializing cgroup subsys ns
[ 0.004000] Initializing cgroup subsys cpuacct
[ 0.004000] Initializing cgroup subsys memory
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 0(2) -> Core 0
[ 0.004000] using C1E aware idle routine
[ 0.004000] Checking 'hlt' instruction... OK.
[ 0.017169] ACPI: Core revision 20080609
[ 0.019093] ACPI: Checking initramfs for custom DSDT
[ 0.263694] ENABLING IO-APIC IRQs
[ 0.263914] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.303615] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ stepping 03
[ 0.304019] Booting processor 1/1 ip 6000
[ 0.004000] Initializing CPU#1
[ 0.004000] Calibrating delay using timer specific routine.. 5611.73 BogoMIPS (lpj=11223474)
[ 0.004000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.004000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.004000] CPU 1(2) -> Core 1
[ 0.388130] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ stepping 03
[ 0.388151] Brought up 2 CPUs
[ 0.388153] Total of 2 processors activated (11223.33 BogoMIPS).
[ 0.388192] CPU0 attaching sched-domain:
[ 0.388194] domain 0: span 0-1 level CPU
[ 0.388196] groups: 0 1
[ 0.388200] CPU1 attaching sched-domain:
[ 0.388202] domain 0: span 0-1 level CPU
[ 0.388204] groups: 1 0
[ 0.388251] net_namespace: 840 bytes
[ 0.388251] Booting paravirtualized kernel on bare hardware
[ 0.388251] Time: 16:54:39 Date: 02/01/09
[ 0.388251] NET: Registered protocol family 16
[ 0.388251] EISA bus registered
[ 0.388251] ACPI: bus type pci registered
[ 0.388251] PCI: MCFG configuration 0: base f0000000 segment 0 buses 0 - 63
[ 0.388251] PCI: MCFG area at f0000000 reserved in E820
[ 0.388251] PCI: Using MMCONFIG for extended config space
[ 0.388251] PCI: Using configuration type 1 for base access
[ 0.388959] ACPI: EC: Look up EC in DSDT
[ 0.399622] ACPI: Interpreter enabled
[ 0.399624] ACPI: (supports S0 S1 S3 S4 S5)
[ 0.399637] ACPI: Using IOAPIC for interrupt routing
[ 0.408994] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.408994] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408994] pci 0000:00:02.0: PME# disabled
[ 0.408994] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408994] pci 0000:00:04.0: PME# disabled
[ 0.408994] PCI: 0000:00:0a.1 reg 20 io port: [4c00, 4c3f]
[ 0.408994] PCI: 0000:00:0a.1 reg 24 io port: [4c40, 4c7f]
[ 0.408994] pci 0000:00:0a.1: PME# supported from D3hot D3cold
[ 0.408994] pci 0000:00:0a.1: PME# disabled
[ 0.408994] PCI: 0000:00:0b.0 reg 10 32bit mmio: [fe02f000, fe02ffff]
[ 0.408994] pci 0000:00:0b.0: supports D1
[ 0.408994] pci 0000:00:0b.0: supports D2
[ 0.408994] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408994] pci 0000:00:0b.0: PME# disabled
[ 0.408994] PCI: 0000:00:0b.1 reg 10 32bit mmio: [fe02e000, fe02e0ff]
[ 0.408994] pci 0000:00:0b.1: supports D1
[ 0.408994] pci 0000:00:0b.1: supports D2
[ 0.408994] pci 0000:00:0b.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408994] pci 0000:00:0b.1: PME# disabled
[ 0.408994] PCI: 0000:00:0d.0 reg 20 io port: [f400, f40f]
[ 0.408994] PCI: 0000:00:0e.0 reg 10 io port: [9f0, 9f7]
[ 0.408994] PCI: 0000:00:0e.0 reg 14 io port: [bf0, bf3]
[ 0.408994] PCI: 0000:00:0e.0 reg 18 io port: [970, 977]
[ 0.408994] PCI: 0000:00:0e.0 reg 1c io port: [b70, b73]
[ 0.408994] PCI: 0000:00:0e.0 reg 20 io port: [e000, e00f]
[ 0.408994] PCI: 0000:00:0e.0 reg 24 32bit mmio: [fe02d000, fe02dfff]
[ 0.408994] PCI: 0000:00:0f.0 reg 10 io port: [9e0, 9e7]
[ 0.408994] PCI: 0000:00:0f.0 reg 14 io port: [be0, be3]
[ 0.408994] PCI: 0000:00:0f.0 reg 18 io port: [960, 967]
[ 0.408994] PCI: 0000:00:0f.0 reg 1c io port: [b60, b63]
[ 0.408994] PCI: 0000:00:0f.0 reg 20 io port: [cc00, cc0f]
[ 0.408994] PCI: 0000:00:0f.0 reg 24 32bit mmio: [fe02c000, fe02cfff]
[ 0.408994] PCI: 0000:00:10.1 reg 10 32bit mmio: [fe024000, fe027fff]
[ 0.408994] pci 0000:00:10.1: PME# supported from D3hot D3cold
[ 0.408994] pci 0000:00:10.1: PME# disabled
[ 0.408994] PCI: 0000:00:14.0 reg 10 32bit mmio: [fe02b000, fe02bfff]
[ 0.408994] PCI: 0000:00:14.0 reg 14 io port: [c800, c807]
[ 0.408994] pci 0000:00:14.0: supports D1
[ 0.408994] pci 0000:00:14.0: supports D2
[ 0.408994] pci 0000:00:14.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408994] pci 0000:00:14.0: PME# disabled
[ 0.408994] PCI: bridge 0000:00:02.0 io port: [b000, bfff]
[ 0.408994] PCI: bridge 0000:00:02.0 32bit mmio: [fdc00000, fdcfffff]
[ 0.408994] PCI: bridge 0000:00:02.0 64bit mmio pref: [fdd00000, fddfffff]
[ 0.408994] PCI: 0000:02:00.0 reg 10 32bit mmio: [fa000000, faffffff]
[ 0.408994] PCI: 0000:02:00.0 reg 14 64bit mmio: [d0000000, dfffffff]
[ 0.408994] PCI: 0000:02:00.0 reg 1c 64bit mmio: [f8000000, f9ffffff]
[ 0.408994] PCI: 0000:02:00.0 reg 24 io port: [9c00, 9c7f]
[ 0.408994] PCI: 0000:02:00.0 reg 30 32bit mmio: [fbfe0000, fbffffff]
[ 0.408994] PCI: bridge 0000:00:04.0 io port: [9000, 9fff]
[ 0.408994] PCI: bridge 0000:00:04.0 32bit mmio: [f8000000, fbffffff]
[ 0.408994] PCI: bridge 0000:00:04.0 64bit mmio pref: [d0000000, dfffffff]
[ 0.409007] PCI: 0000:03:05.0 reg 10 32bit mmio: [effff000, efffffff]
[ 0.409036] pci 0000:03:05.0: supports D1
[ 0.409037] pci 0000:03:05.0: supports D2
[ 0.409039] pci 0000:03:05.0: PME# supported from D0 D1 D2 D3hot
[ 0.409042] pci 0000:03:05.0: PME# disabled
[ 0.409062] PCI: 0000:03:06.0 reg 10 32bit mmio: [efffe000, efffe7ff]
[ 0.409092] pci 0000:03:06.0: supports D1
[ 0.409093] pci 0000:03:06.0: supports D2
[ 0.409117] PCI: 0000:03:07.0 reg 10 io port: [ac00, ac1f]
[ 0.409125] PCI: 0000:03:07.0 reg 14 64bit mmio: [efc00000, efdfffff]
[ 0.409133] PCI: 0000:03:07.0 reg 1c 64bit mmio: [e8000000, ebffffff]
[ 0.409151] pci 0000:03:07.0: supports D1
[ 0.409152] pci 0000:03:07.0: supports D2
[ 0.409174] PCI: 0000:03:09.0 reg 10 32bit mmio: [effe0000, effeffff]
[ 0.409224] pci 0000:00:10.0: transparent bridge
[ 0.409227] PCI: bridge 0000:00:10.0 io port: [a000, afff]
[ 0.409229] PCI: bridge 0000:00:10.0 32bit mmio: [e8000000, efffffff]
[ 0.409232] PCI: bridge 0000:00:10.0 32bit mmio pref: [fde00000, fdefffff]
[ 0.409239] bus 00 -> node 0
[ 0.409245] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.409580] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 0.512065] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 *10 11 14 15)
[ 0.512272] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 *7 9 10 11 14 15)
[ 0.512478] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.512683] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 *11 14 15)
[ 0.512888] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
[ 0.513093] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.513297] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.513501] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.513707] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 0.513915] ACPI: PCI Interrupt Link [LUBB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.514122] ACPI: PCI Interrupt Link [LMAC] (IRQs *5 7 9 10 11 14 15)
[ 0.514325] ACPI: PCI Interrupt Link [LACI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.514532] ACPI: PCI Interrupt Link [LAZA] (IRQs 5 *7 9 10 11 14 15)
[ 0.514737] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.514943] ACPI: PCI Interrupt Link [LMCI] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.515149] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 0.515355] ACPI: PCI Interrupt Link [LUB2] (IRQs 5 *7 9 10 11 14 15)
[ 0.515560] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
[ 0.515766] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 0.515972] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 0.516230] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[ 0.516466] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 0.516705] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[ 0.516940] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[ 0.517178] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
[ 0.517413] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
[ 0.517653] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 0.517888] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 0.518128] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 0.518364] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[ 0.518605] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 0.518845] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0, disabled.
[ 0.519081] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 0.519322] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 0.519558] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[ 0.519800] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 0.520048] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 0.520288] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 0.520525] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 0.520766] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 0.521002] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 0.521070] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.521070] pnp: PnP ACPI init
[ 0.521070] ACPI: bus type pnp registered
[ 0.524895] pnp: PnP ACPI: found 11 devices
[ 0.524895] ACPI: ACPI bus type pnp unregistered
[ 0.524895] PnPBIOS: Disabled by ACPI PNP
[ 0.524895] PCI: Using ACPI for IRQ routing
[ 0.532039] NET: Registered protocol family 8
[ 0.532040] NET: Registered protocol family 20
[ 0.532060] NetLabel: Initializing
[ 0.532061] NetLabel: domain hash size = 128
[ 0.532062] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.532075] NetLabel: unlabeled traffic allowed by default
[ 0.532083] hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
[ 0.532087] hpet0: 3 32-bit timers, 25000000 Hz
[ 0.533546] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.533548] actual entries 65620
[ 0.533655] AppArmor: AppArmor Filesystem Enabled
[ 0.533682] ACPI: RTC can wake from S4
[ 0.536044] Switched to high resolution mode on CPU 0
[ 0.536171] Switched to high resolution mode on CPU 1
[ 0.540028] system 00:01: ioport range 0x4000-0x407f has been reserved
[ 0.540030] system 00:01: ioport range 0x4080-0x40ff has been reserved
[ 0.540033] system 00:01: ioport range 0x4400-0x447f has been reserved
[ 0.540035] system 00:01: ioport range 0x4480-0x44ff has been reserved
[ 0.540037] system 00:01: ioport range 0x4800-0x487f has been reserved
[ 0.540039] system 00:01: ioport range 0x4880-0x48ff has been reserved
[ 0.540041] system 00:01: ioport range 0x2000-0x207f has been reserved
[ 0.540044] system 00:01: ioport range 0x2080-0x20ff has been reserved
[ 0.540049] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[ 0.540051] system 00:02: ioport range 0x800-0x87f has been reserved
[ 0.540059] system 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
[ 0.540064] system 00:0a: iomem range 0xf0000-0xf3fff could not be reserved
[ 0.540066] system 00:0a: iomem range 0xf4000-0xf7fff could not be reserved
[ 0.540068] system 00:0a: iomem range 0xf8000-0xfbfff could not be reserved
[ 0.540071] system 00:0a: iomem range 0xfc000-0xfffff could not be reserved
[ 0.540073] system 00:0a: iomem range 0xfefff000-0xfefff0ff could not be reserved
[ 0.540076] system 00:0a: iomem range 0x7fef0000-0x7fefffff could not be reserved
[ 0.540078] system 00:0a: iomem range 0xffff0000-0xffffffff could not be reserved
[ 0.540081] system 00:0a: iomem range 0x0-0x9ffff could not be reserved
[ 0.540083] system 00:0a: iomem range 0x100000-0x7feeffff could not be reserved
[ 0.540086] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.540088] system 00:0a: iomem range 0xfee00000-0xfeefffff could not be reserved
[ 0.540090] system 00:0a: iomem range 0xfefff000-0xfeffffff could not be reserved
[ 0.540093] system 00:0a: iomem range 0xfff80000-0xfff80fff could not be reserved
[ 0.540095] system 00:0a: iomem range 0xfff90000-0xfffbffff could not be reserved
[ 0.540098] system 00:0a: iomem range 0xfffed000-0xfffeffff could not be reserved
[ 0.575222] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.575224] pci 0000:00:02.0: IO window: 0xb000-0xbfff
[ 0.575227] pci 0000:00:02.0: MEM window: 0xfdc00000-0xfdcfffff
[ 0.575230] pci 0000:00:02.0: PREFETCH window: 0x000000fdd00000-0x000000fddfffff
[ 0.575233] pci 0000:00:04.0: PCI bridge, secondary bus 0000:02
[ 0.575235] pci 0000:00:04.0: IO window: 0x9000-0x9fff
[ 0.575238] pci 0000:00:04.0: MEM window: 0xf8000000-0xfbffffff
[ 0.575240] pci 0000:00:04.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.575244] pci 0000:00:10.0: PCI bridge, secondary bus 0000:03
[ 0.575246] pci 0000:00:10.0: IO window: 0xa000-0xafff
[ 0.575249] pci 0000:00:10.0: MEM window: 0xe8000000-0xefffffff
[ 0.575252] pci 0000:00:10.0: PREFETCH window: 0x000000fde00000-0x000000fdefffff
[ 0.575261] pci 0000:00:02.0: setting latency timer to 64
[ 0.575265] pci 0000:00:04.0: setting latency timer to 64
[ 0.575269] pci 0000:00:10.0: setting latency timer to 64
[ 0.575271] bus: 00 index 0 io port: [0, ffff]
[ 0.575273] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.575275] bus: 01 index 0 io port: [b000, bfff]
[ 0.575276] bus: 01 index 1 mmio: [fdc00000, fdcfffff]
[ 0.575278] bus: 01 index 2 mmio: [fdd00000, fddfffff]
[ 0.575279] bus: 01 index 3 mmio: [0, 0]
[ 0.575281] bus: 02 index 0 io port: [9000, 9fff]
[ 0.575283] bus: 02 index 1 mmio: [f8000000, fbffffff]
[ 0.575285] bus: 02 index 2 mmio: [d0000000, dfffffff]
[ 0.575286] bus: 02 index 3 mmio: [0, 0]
[ 0.575288] bus: 03 index 0 io port: [a000, afff]
[ 0.575289] bus: 03 index 1 mmio: [e8000000, efffffff]
[ 0.575291] bus: 03 index 2 mmio: [fde00000, fdefffff]
[ 0.575293] bus: 03 index 3 io port: [0, ffff]
[ 0.575294] bus: 03 index 4 mmio: [0, ffffffff]
[ 0.575303] NET: Registered protocol family 2
[ 0.588047] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.588264] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.588728] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.588949] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.588952] TCP reno registered
[ 0.592078] NET: Registered protocol family 1
[ 0.592171] checking if image is initramfs... it is
[ 1.089405] Freeing initrd memory: 8003k freed
[ 1.090205] audit: initializing netlink socket (disabled)
[ 1.090221] type=2000 audit(1233507279.089:1): initialized
[ 1.094582] highmem bounce pool size: 64 pages
[ 1.094587] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.096265] VFS: Disk quotas dquot_6.5.1
[ 1.096344] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.096433] msgmni has been set to 1743
[ 1.096537] io scheduler noop registered
[ 1.096539] io scheduler anticipatory registered
[ 1.096541] io scheduler deadline registered
[ 1.096550] io scheduler cfq registered (default)
[ 1.096564] pci 0000:00:00.0: Enabling HT MSI Mapping
[ 1.096593] pci 0000:00:02.0: Enabling HT MSI Mapping
[ 1.096601] pci 0000:00:04.0: Enabling HT MSI Mapping
[ 1.096622] pci 0000:00:09.0: Enabling HT MSI Mapping
[ 1.128038] pci 0000:00:0e.0: Enabling HT MSI Mapping
[ 1.128049] pci 0000:00:0f.0: Enabling HT MSI Mapping
[ 1.128057] pci 0000:00:10.0: Enabling HT MSI Mapping
[ 1.128068] pci 0000:00:10.1: Enabling HT MSI Mapping
[ 1.128086] pci 0000:02:00.0: Boot video device
[ 1.128192] pcieport-driver 0000:00:02.0: setting latency timer to 64
[ 1.128213] pcieport-driver 0000:00:02.0: found MSI capability
[ 1.128230] pci_express 0000:00:02.0:pcie00: allocate port service
[ 1.128272] pci_express 0000:00:02.0:pcie03: allocate port service
[ 1.128339] pcieport-driver 0000:00:04.0: setting latency timer to 64
[ 1.128357] pcieport-driver 0000:00:04.0: found MSI capability
[ 1.128370] pci_express 0000:00:04.0:pcie00: allocate port service
[ 1.128412] pci_express 0000:00:04.0:pcie03: allocate port service
[ 1.128705] isapnp: Scanning for PnP cards...
[ 1.481482] isapnp: No Plug & Play device found
[ 1.510698] hpet_resources: 0xfefff000 is busy
[ 1.510760] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 1.512679] brd: module loaded
[ 1.512739] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 1.512837] PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
[ 1.512839] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 1.515705] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.515709] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.517120] mice: PS/2 mouse device common for all mice
[ 1.517225] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 1.517256] rtc0: alarms up to one year, y3k, hpet irqs
[ 1.517379] EISA: Probing bus 0 at eisa.0
[ 1.517388] Cannot allocate resource for EISA slot 2
[ 1.517392] Cannot allocate resource for EISA slot 4
[ 1.517403] EISA: Detected 0 cards.
[ 1.517405] cpuidle: using governor ladder
[ 1.517407] cpuidle: using governor menu
[ 1.517793] TCP cubic registered
[ 1.517814] Using IPI No-Shortcut mode
[ 1.517973] registered taskstats version 1
[ 1.518086] Magic number: 13:635:943
[ 1.518150] tty ptyye: hash matches
[ 1.518187] tty tty0: hash matches
[ 1.518188] tty console: hash matches
[ 1.518253] rtc_cmos 00:05: setting system clock to 2009-02-01 16:54:40 UTC (1233507280)
[ 1.518256] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 1.518258] EDD information not available.
[ 1.518478] Freeing unused kernel memory: 424k freed
[ 1.518525] Write protecting the kernel text: 2580k
[ 1.518556] Write protecting the kernel read-only data: 940k
[ 1.679448] fuse init (API version 7.9)
[ 1.836804] fan PNP0C0B:00: registered as cooling_device0
[ 1.836809] ACPI: Fan [FAN] (on)
[ 1.841976] processor ACPI0007:00: registered as cooling_device1
[ 1.842028] processor ACPI0007:01: registered as cooling_device2
[ 1.849043] thermal LNXTHERM:01: registered as thermal_zone0
[ 1.851019] ACPI: Thermal Zone [THRM] (40 C)
[ 2.382494] usbcore: registered new interface driver usbfs
[ 2.382517] usbcore: registered new interface driver hub
[ 2.390018] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[ 2.390047] ohci1394 0000:03:05.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 2.441938] ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[19] MMIO=[effff000-effff7ff] Max Packet=[1024] IR/IT contexts=[8/8]
[ 2.449029] usbcore: registered new device driver usb
[ 2.450438] No dock devices found.
[ 2.453175] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.61.
[ 2.453598] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[ 2.453608] forcedeth 0000:00:14.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[ 2.453612] forcedeth 0000:00:14.0: setting latency timer to 64
[ 2.453635] nv_probe: set workaround bit for reversed mac addr
[ 2.463297] SCSI subsystem initialized
[ 2.480069] libata version 3.00 loaded.
[ 2.481773] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.972457] forcedeth 0000:00:14.0: ifname eth0, PHY OUI 0x5043 @ 1, addr 00:18:f3:6d:ba:02
[ 2.972461] forcedeth 0000:00:14.0: highdma pwrctl timirq lnktim desc-v3
[ 2.973984] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 22
[ 2.973994] ohci_hcd 0000:00:0b.0: PCI INT A -> Link[APCF] -> GSI 22 (level, low) -> IRQ 22
[ 2.974004] ohci_hcd 0000:00:0b.0: setting latency timer to 64
[ 2.974007] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 2.974046] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 2.974069] ohci_hcd 0000:00:0b.0: irq 22, io mem 0xfe02f000
[ 3.030129] usb usb1: configuration #1 chosen from 1 choice
[ 3.030150] hub 1-0:1.0: USB hub found
[ 3.030159] hub 1-0:1.0: 8 ports detected
[ 3.236620] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[ 3.236632] ehci_hcd 0000:00:0b.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[ 3.236644] ehci_hcd 0000:00:0b.1: setting latency timer to 64
[ 3.236647] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 3.236685] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 3.236708] ehci_hcd 0000:00:0b.1: debug port 1
[ 3.236712] ehci_hcd 0000:00:0b.1: cache line size of 64 is not supported
[ 3.236727] ehci_hcd 0000:00:0b.1: irq 21, io mem 0xfe02e000
[ 3.412020] usb 1-1: new low speed USB device using ohci_hcd and address 2
[ 3.424016] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 3.424138] usb usb2: configuration #1 chosen from 1 choice
[ 3.424157] hub 2-0:1.0: USB hub found
[ 3.424164] hub 2-0:1.0: 8 ports detected
[ 3.480027] hub 1-0:1.0: unable to enumerate USB device on port 1
[ 3.632372] pata_amd 0000:00:0d.0: version 0.3.10
[ 3.632414] pata_amd 0000:00:0d.0: setting latency timer to 64
[ 3.632491] scsi0 : pata_amd
[ 3.632723] scsi1 : pata_amd
[ 3.633334] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf400 irq 14
[ 3.633337] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf408 irq 15
[ 3.720418] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000e37701]
[ 3.963421] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 20
[ 3.963450] pata_acpi 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 3.963514] pata_acpi 0000:00:0e.0: setting latency timer to 64
[ 3.963537] pata_acpi 0000:00:0e.0: PCI INT A disabled
[ 3.963950] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 23
[ 3.963953] pata_acpi 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 3.963982] pata_acpi 0000:00:0f.0: setting latency timer to 64
[ 3.963999] pata_acpi 0000:00:0f.0: PCI INT A disabled
[ 3.972796] sata_nv 0000:00:0e.0: version 3.5
[ 3.972812] sata_nv 0000:00:0e.0: PCI INT A -> Link[APSI] -> GSI 20 (level, low) -> IRQ 20
[ 3.972814] sata_nv 0000:00:0e.0: Using SWNCQ mode
[ 3.972853] sata_nv 0000:00:0e.0: setting latency timer to 64
[ 3.972984] scsi2 : sata_nv
[ 3.973058] scsi3 : sata_nv
[ 3.973242] ata3: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xe000 irq 20
[ 3.973244] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xe008 irq 20
[ 4.440041] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.448173] ata3.00: ATA-7: ST3320820AS, 3.AHG, max UDMA/100
[ 4.448176] ata3.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.464173] ata3.00: configured for UDMA/100
[ 4.512020] usb 2-4: new high speed USB device using ehci_hcd and address 5
[ 4.646682] usb 2-4: configuration #1 chosen from 1 choice
[ 4.646916] hub 2-4:1.0: USB hub found
[ 4.655513] hub 2-4:1.0: 4 ports detected
[ 4.932043] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 4.940177] ata4.00: ATA-7: ST3320820AS, 3.AHG, max UDMA/100
[ 4.940179] ata4.00: 625142448 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 4.956176] ata4.00: configured for UDMA/100
[ 4.956267] scsi 2:0:0:0: Direct-Access ATA ST3320820AS 3.AH PQ: 0 ANSI: 5
[ 4.956402] scsi 2:0:0:0: Attached scsi generic sg0 type 0
[ 4.956451] scsi 3:0:0:0: Direct-Access ATA ST3320820AS 3.AH PQ: 0 ANSI: 5
[ 4.956511] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[ 4.956533] sata_nv 0000:00:0f.0: PCI INT A -> Link[APSJ] -> GSI 23 (level, low) -> IRQ 23
[ 4.956536] sata_nv 0000:00:0f.0: Using SWNCQ mode
[ 4.956573] sata_nv 0000:00:0f.0: setting latency timer to 64
[ 4.957317] scsi4 : sata_nv
[ 4.957384] scsi5 : sata_nv
[ 4.957569] ata5: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xcc00 irq 23
[ 4.957572] ata6: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xcc08 irq 23
[ 4.976026] usb 2-6: new high speed USB device using ehci_hcd and address 6
[ 5.112030] usb 2-6: configuration #1 chosen from 1 choice
[ 5.416019] usb 1-1: new low speed USB device using ohci_hcd and address 3
[ 5.424044] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.432181] ata5.00: ATAPI: HL-DT-STDVDRRW GSA-H30L, S655, max UDMA/33
[ 5.448174] ata5.00: configured for UDMA/33
[ 5.646765] usb 1-1: configuration #1 chosen from 1 choice
[ 5.916043] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 310)
[ 5.925275] ata6.00: ATA-6: WDC WD740GD-00FLC0, 33.08F33, max UDMA/133
[ 5.925278] ata6.00: 145226112 sectors, multi 1: LBA48
[ 5.941246] ata6.00: configured for UDMA/133
[ 5.943096] scsi 4:0:0:0: CD-ROM HL-DT-ST DVDRRW GSA-H30L S655 PQ: 0 ANSI: 5
[ 5.943236] scsi 4:0:0:0: Attached scsi generic sg2 type 5
[ 5.943289] scsi 5:0:0:0: Direct-Access ATA WDC WD740GD-00FL 33.0 PQ: 0 ANSI: 5
[ 5.943353] scsi 5:0:0:0: Attached scsi generic sg3 type 0
[ 5.953028] usb 1-2: new full speed USB device using ohci_hcd and address 4
[ 5.967854] Driver 'sd' needs updating - please use bus_type methods
[ 5.967945] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 5.967959] sd 2:0:0:0: [sda] Write Protect is off
[ 5.967961] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.967980] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.968035] sd 2:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB)
[ 5.968044] sd 2:0:0:0: [sda] Write Protect is off
[ 5.968046] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.968063] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.968066] sda:<4>Driver 'sr' needs updating - please use bus_type methods
[ 5.973684] sda1 sda2
[ 5.973797] sd 2:0:0:0: [sda] Attached SCSI disk
[ 5.973863] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 5.973875] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.973877] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.973895] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.973936] sd 3:0:0:0: [sdb] 625142448 512-byte hardware sectors (320073 MB)
[ 5.973945] sd 3:0:0:0: [sdb] Write Protect is off
[ 5.973947] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 5.973964] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.973967] sdb: sdb1
[ 5.993544] sd 3:0:0:0: [sdb] Attached SCSI disk
[ 5.993659] sd 5:0:0:0: [sdc] 145226112 512-byte hardware sectors (74356 MB)
[ 5.993676] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.993678] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.993696] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.993753] sd 5:0:0:0: [sdc] 145226112 512-byte hardware sectors (74356 MB)
[ 5.993763] sd 5:0:0:0: [sdc] Write Protect is off
[ 5.993765] sd 5:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 5.993782] sd 5:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.993784] sdc:sr0: scsi3-mmc drive: 40x/40x writer dvd-ram cd/rw xa/form2 cdda tray
[ 5.999267] Uniform CD-ROM driver Revision: 3.20
[ 5.999346] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.006750] sdc1 sdc2 sdc3
[ 6.019493] sd 5:0:0:0: [sdc] Attached SCSI disk
[ 6.183216] usb 1-2: configuration #1 chosen from 1 choice
[ 6.492019] usb 1-3: new full speed USB device using ohci_hcd and address 5
[ 6.696167] usb 1-3: configuration #1 chosen from 1 choice
[ 6.776257] usb 2-4.3: new full speed USB device using ehci_hcd and address 7
[ 6.914118] usb 2-4.3: configuration #1 chosen from 1 choice
[ 6.922580] usbcore: registered new interface driver libusual
[ 6.924102] usbcore: registered new interface driver hiddev
[ 6.928934] Initializing USB Mass Storage driver...
[ 6.929000] scsi6 : SCSI emulation for USB Mass Storage devices
[ 6.929067] usb-storage: device found at 6
[ 6.929068] usb-storage: waiting for device to settle before scanning
[ 6.935304] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.0/input/input1
[ 6.936117] input,hidraw0: USB HID v1.11 Keyboard [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:0b.0-1
[ 6.966112] input: Chicony Saitek Eclipse II Keyboard as /devices/pci0000:00/0000:00:0b.0/usb1/1-1/1-1:1.1/input/input2
[ 6.969134] input,hiddev96,hidraw1: USB HID v1.11 Device [Chicony Saitek Eclipse II Keyboard] on usb-0000:00:0b.0-1
[ 6.976319] input: Logitech USB Gaming Mouse as /devices/pci0000:00/0000:00:0b.0/usb1/1-2/1-2:1.0/input/input3
[ 6.976564] input,hidraw2: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:0b.0-2
[ 6.989147] hiddev97hidraw3: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:0b.0-2
[ 6.989205] usbcore: registered new interface driver usbhid
[ 6.989208] usbhid: v2.6:USB HID core driver
[ 6.989239] usbcore: registered new interface driver usb-storage
[ 6.989254] USB Mass Storage support registered.
[ 7.025511] PM: Starting manual resume from disk
[ 7.025514] PM: Resume from partition 8:35
[ 7.025516] PM: Checking hibernation image.
[ 7.025654] PM: Resume from disk failed.
[ 7.056881] kjournald starting. Commit interval 5 seconds
[ 7.056898] EXT3-fs: mounted filesystem with ordered data mode.
[ 11.928199] usb-storage: device scan complete
[ 11.930017] scsi 6:0:0:0: Direct-Access Generic USB SD Reader 1.00 PQ: 0 ANSI: 0
[ 11.930641] scsi 6:0:0:1: Direct-Access Generic USB CF Reader 1.01 PQ: 0 ANSI: 0
[ 11.931264] scsi 6:0:0:2: Direct-Access Generic USB SM Reader 1.02 PQ: 0 ANSI: 0
[ 11.931889] scsi 6:0:0:3: Direct-Access Generic USB MS Reader 1.03 PQ: 0 ANSI: 0
[ 11.932819] sd 6:0:0:0: [sdd] Attached SCSI removable disk
[ 11.932912] sd 6:0:0:0: Attached scsi generic sg4 type 0
[ 11.933549] sd 6:0:0:1: [sde] Attached SCSI removable disk
[ 11.933588] sd 6:0:0:1: Attached scsi generic sg5 type 0
[ 11.934299] sd 6:0:0:2: [sdf] Attached SCSI removable disk
[ 11.934335] sd 6:0:0:2: Attached scsi generic sg6 type 0
[ 11.935041] sd 6:0:0:3: [sdg] Attached SCSI removable disk
[ 11.935080] sd 6:0:0:3: Attached scsi generic sg7 type 0
[ 12.039287] udevd version 124 started
[ 12.318530] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 12.364229] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 12.469125] ACPI: I/O resource nForce2_smbus [0x4c00-0x4c3f] conflicts with ACPI region SM00 [0x4c00-0x4c05]
[ 12.469129] ACPI: Device needs an ACPI driver
[ 12.469155] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00
[ 12.469169] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40
[ 12.497238] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 12.529036] ACPI: Power Button (FF) [PWRF]
[ 12.529106] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
[ 12.561032] ACPI: Power Button (CM) [PWRB]
[ 13.182591] Linux agpgart interface v0.103
[ 13.341753] nvidia: module license 'NVIDIA' taints kernel.
[ 13.658621] ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
[ 13.658633] nvidia 0000:02:00.0: PCI INT A -> Link[APC5] -> GSI 16 (level, low) -> IRQ 16
[ 13.658639] nvidia 0000:02:00.0: setting latency timer to 64
[ 13.658859] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.11 Wed Nov 26 10:53:26 PST 2008
[ 13.737118] Bluetooth: Core ver 2.13
[ 13.777115] NET: Registered protocol family 31
[ 13.777118] Bluetooth: HCI device and connection manager initialized
[ 13.777121] Bluetooth: HCI socket layer initialized
[ 13.893216] Linux video capture interface: v2.00
[ 13.958150] Bluetooth: Generic Bluetooth USB driver ver 0.3
[ 13.959350] usbcore: registered new interface driver btusb
[ 13.994782] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 14.072802] gspca: main v2.2.0 registered
[ 14.108487] cfg80211: Using static regulatory domain info
[ 14.108490] cfg80211: Regulatory domain: US
[ 14.108492] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.108494] (2402000 KHz - 2472000 KHz @ 40000 KHz), (600 mBi, 2700 mBm)
[ 14.108496] (5170000 KHz - 5190000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.108498] (5190000 KHz - 5210000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.108500] (5210000 KHz - 5230000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.108502] (5230000 KHz - 5330000 KHz @ 40000 KHz), (600 mBi, 2300 mBm)
[ 14.108504] (5735000 KHz - 5835000 KHz @ 40000 KHz), (600 mBi, 3000 mBm)
[ 14.108506] cfg80211: Calling CRDA for country: US
[ 14.148809] gspca: probing 046d:08da
[ 14.253234] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 14.253246] ath5k 0000:03:09.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[ 14.253284] ath5k 0000:03:09.0: registered as 'phy0'
[ 14.420101] phy0: Selected rate control algorithm 'pid'
[ 14.578079] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 14.682889] ath5k phy0: Atheros AR5414 chip found (MAC: 0xa2, PHY: 0x61)
[ 14.682968] saa7134 0000:03:06.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[ 14.682981] saa7133[0]: found at 0000:03:06.0, rev: 209, irq: 19, latency: 32, mmio: 0xefffe000
[ 14.682995] saa7133[0]: subsystem: 1043:4871, board: ASUS P7131 4871 [card=111,autodetected]
[ 14.683004] saa7133[0]: board init: gpio is 0
[ 14.727940] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
[ 14.738295] wlan: 0.9.4
[ 14.779132] ath_pci: 0.9.4
[ 14.839966] saa7133[0]: i2c eeprom 00: 43 10 71 48 54 20 1c 00 43 43 a9 1c 55 d2 b2 92
[ 14.839974] saa7133[0]: i2c eeprom 10: ff ff ff 0f ff 20 ff ff ff ff ff ff ff ff ff ff
[ 14.839981] saa7133[0]: i2c eeprom 20: 01 40 01 02 03 00 01 03 08 ff 00 cf ff ff ff ff
[ 14.839987] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.839993] saa7133[0]: i2c eeprom 40: ff 21 00 c2 96 10 03 22 15 50 ff ff ff ff ff ff
[ 14.839999] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840005] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840011] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840017] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840023] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840029] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840035] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840041] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840047] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840053] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.840059] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
[ 14.985088] tuner' 2-004b: chip found @ 0x96 (saa7133[0])
[ 15.065022] tda829x 2-004b: setting tuner address to 61
[ 15.145145] tda829x 2-004b: type set to tda8290+75a
[ 16.271051] zc3xx: probe 2wr ov vga 0x0000
[ 16.340052] zc3xx: probe sensor -> 11
[ 16.340054] zc3xx: Find Sensor HV7131R(c)
[ 16.355179] gspca: probe ok
[ 16.355193] gspca: probing 046d:08da
[ 16.415442] usbcore: registered new interface driver zc3xx
[ 16.415446] zc3xx: registered
[ 16.415572] usbcore: registered new interface driver snd-usb-audio
[ 19.008493] saa7133[0]: registered device video1 [v4l2]
[ 19.008626] saa7133[0]: registered device vbi0
[ 19.072437] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 22
[ 19.072442] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 22 (level, low) -> IRQ 22
[ 19.072461] HDA Intel 0000:00:10.1: setting latency timer to 64
[ 19.090737] saa7134 ALSA driver for DMA sound loaded
[ 19.090763] saa7133[0]/alsa: saa7133[0] at 0xefffe000 irq 19 registered as card -2
[ 19.107877] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[ 19.189102] DVB: registering new adapter (saa7133[0])
[ 19.189107] DVB: registering frontend 0 (Philips TDA10046H DVB-T)...
[ 19.260015] tda1004x: setting up plls for 48MHz sampling clock
[ 20.008349] lp: driver loaded but no devices found
[ 20.101156] Adding 2144668k swap on /dev/sdc3. Priority:-1 extents:1 across:2144668k
[ 20.638775] EXT3 FS on sdc1, internal journal
[ 21.365070] kjournald starting. Commit interval 5 seconds
[ 21.365412] EXT3 FS on sdc2, internal journal
[ 21.365418] EXT3-fs: mounted filesystem with writeback data mode.
[ 21.404884] ReiserFS: sdb1: found reiserfs format "3.6" with standard journal
[ 21.404901] ReiserFS: sdb1: using ordered data mode
[ 21.411238] ReiserFS: sdb1: journal params: device sdb1, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 21.411617] ReiserFS: sdb1: checking transaction log (sdb1)
[ 21.470359] ReiserFS: sdb1: Using r5 hash to sort names
[ 21.504012] tda1004x: timeout waiting for DSP ready
[ 21.544015] tda1004x: found firmware revision 8d -- invalid
[ 21.544018] tda1004x: trying to boot from eeprom
[ 21.666548] type=1505 audit(1233503700.760:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4594
[ 21.817070] type=1505 audit(1233503700.912:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4599
[ 21.817259] type=1505 audit(1233503700.912:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4599
[ 21.882359] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 22.361229] ACPI: WMI: Mapper loaded
[ 22.407477] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 5400+ processors (2 cpu cores) (version 2.20.00)
[ 22.407530] powernow-k8: 0 : fid 0x14 (2800 MHz), vid 0x8
[ 22.407533] powernow-k8: 1 : fid 0x12 (2600 MHz), vid 0xa
[ 22.407535] powernow-k8: 2 : fid 0x10 (2400 MHz), vid 0xc
[ 22.407537] powernow-k8: 3 : fid 0xe (2200 MHz), vid 0xe
[ 22.407539] powernow-k8: 4 : fid 0xc (2000 MHz), vid 0x10
[ 22.407541] powernow-k8: 5 : fid 0xa (1800 MHz), vid 0x10
[ 22.407542] powernow-k8: 6 : fid 0x2 (1000 MHz), vid 0x12
[ 22.618904] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.670982] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 22.670986] apm: disabled - APM is not SMP safe.
[ 22.856400] ppdev: user-space parallel port driver
[ 23.500023] Clocksource tsc unstable (delta = -182705077 ns)
[ 23.876023] tda1004x: timeout waiting for DSP ready
[ 23.920017] tda1004x: found firmware revision 1c -- invalid
[ 23.920023] tda1004x: waiting for firmware upload...
[ 23.920029] firmware: requesting dvb-fe-tda10046.fw
[ 25.807355] vboxdrv: Trying to deactivate the NMI watchdog permanently...
[ 25.807363] vboxdrv: Successfully done.
[ 25.807368] vboxdrv: Found 2 processor cores.
[ 25.807587] vboxdrv: fAsync=1 offMin=0xd9f48 offMax=0xd9f48
[ 25.807684] vboxdrv: TSC mode is 'asynchronous', kernel timer mode is 'normal'.
[ 25.807689] vboxdrv: Successfully loaded version 2.1.2 (interface 0x000a0009).
[ 26.727939] NET: Registered protocol family 10
[ 26.729125] lo: Disabled Privacy Extensions
[ 37.232030] tda1004x: found firmware revision 20 -- ok
(The madness occurs somewhere around here)
[ 40.313799] Bluetooth: L2CAP ver 2.11
[ 40.313807] Bluetooth: L2CAP socket layer initialized
[ 40.337206] Bluetooth: SCO (Voice Link) ver 0.6
[ 40.337213] Bluetooth: SCO socket layer initialized
[ 40.347871] Bluetooth: RFCOMM socket layer initialized
[ 40.347893] Bluetooth: RFCOMM TTY layer initialized
[ 40.347897] Bluetooth: RFCOMM ver 1.10
[ 40.376369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.376377] Bluetooth: BNEP filters: protocol multicast
[ 40.450669] Bridge firewalling registered
[ 44.532621] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 44.667229] NET: Registered protocol family 17
[ 46.913633] wlan0: direct probe to AP 00:1b:2f:e4:ed:d0 try 1
[ 47.112032] wlan0: direct probe to AP 00:1b:2f:e4:ed:d0 try 2
[ 47.312038] wlan0: direct probe to AP 00:1b:2f:e4:ed:d0 try 3
[ 47.512029] wlan0: direct probe to AP 00:1b:2f:e4:ed:d0 timed out
[ 54.960027] eth0: no IPv6 routers present
[ 943.068442] ath5k phy0: noise floor calibration timeout (2437MHz)
[ 943.070739] ath5k phy0: noise floor calibration timeout (2462MHz)
[ 944.181594] wlan0: authenticate with AP 00:18:f8:67:8d:e8
[ 944.184213] wlan0: authenticated
[ 944.184225] wlan0: associate with AP 00:18:f8:67:8d:e8
[ 944.186225] wlan0: RX AssocResp from 00:18:f8:67:8d:e8 (capab=0x411 status=0 aid=1)
[ 944.186233] wlan0: associated
[ 944.187124] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 955.140033] wlan0: no IPv6 routers present
[ 1006.208291] wlan0 direct probe responded
[ 1006.208304] wlan0: authenticate with AP 00:18:f8:67:8d:e8
[ 1006.216143] wlan0: authenticated
[ 1006.216155] wlan0: associate with AP 00:18:f8:67:8d:e8
[ 1006.218741] wlan0: RX ReassocResp from 00:18:f8:67:8d:e8 (capab=0x411 status=0 aid=1)
[ 1006.218750] wlan0: associated
[ 1010.222818] wlan0: deauthenticated (Reason: 15)
[ 1010.233106] wlan0: direct probe to AP 00:18:f8:67:8d:e8 try 1
[ 1010.240131] wlan0 direct probe responded
[ 1010.240143] wlan0: authenticate with AP 00:18:f8:67:8d:e8
[ 1010.241949] wlan0: authenticated
[ 1010.241956] wlan0: associate with AP 00:18:f8:67:8d:e8
[ 1010.244307] wlan0: RX ReassocResp from 00:18:f8:67:8d:e8 (capab=0x411 status=0 aid=1)
[ 1010.244314] wlan0: associated
[ 1046.609294] wlan0: disassociating by local choice (reason=3)
[ 1046.649059] wlan0: deauthenticating by local choice (reason=3)
Adv Reply
, sad day becuse it was a scrap machine that worked, now its dead. I will have to build a new machine at a later stage to run ubunutu, still dependant on windows..... thanks for all the comments
Bookmarks