Canon MF4370dn Driver

[seajayf]

Hello,
Did you ever get network printing to work on this model?

I've tried the 1.90 and 2.00 versions of this driver, and keep getting an error when trying to print via the network.

bertmanphx

I got the 4370 to print on the network with the URF ver. 2. but haven't got scan to work yet (haven't tried real hard)

[bertmanphx]

seajayf,
I have not tried to scan to it. From what I've read, people have been successful when using this printer connected via USB. scanning by network, may be dependent upon the back-end in sane? Not sure.



bertmanphx

[ridgeland]

I didn't see this thread before I started a new one about the MF4350d. I got the printer and scanner working. I never got the printer going with 64 bit 9.04, so I installed 32 bit 9.04 and it was fine. Lots of detail in my thread.
http://ubuntuforums.org/showthread.php?t=1427330
Our MF4350d is connected to my wife's 32 bit laptop. Using our home network I can print to the MF4350d from my Ubuntu 9.04 which is 64 bits, no drivers were installed on my PC.

[your imaginary friend]

I didn't see this thread before I started a new one about the MF4350d. I got the printer and scanner working. I never got the printer going with 64 bit 9.04, so I installed 32 bit 9.04 and it was fine. Lots of detail in my thread.
http://ubuntuforums.org/showthread.php?t=1427330
Our MF4350d is connected to my wife's 32 bit laptop. Using our home network I can print to the MF4350d from my Ubuntu 9.04 which is 64 bits, no drivers were installed on my PC.

Ridgeland, does this work for network scanning?

Using UFRv2 on my 64bit ubuntu 10.04 works for network printing but not scanning. It looks likes ridgeland's solution is for usb scanning only. Can anyone confirm?

[ridgeland]

I have a MF4350d. I think the "dn" models are network ready. The MF4350d only works as a USB printer through the PC that hosts it. We use printer sharing PC to PC, not router to printer. I don't see any way to share the scanner the way the printer is shared. Anyone doing that?

[cyberkost]

your imaginary friend, I'm struggling making my Canon D480 print on 64-bit 10.04. It installs ok, cups sends the file, but I'm getting this in /var/log/cups/error_log:

E [08/Jun/2010:23:30:39 -0400] [Job 17] src = libcanon_pdlwrapper.c, line = 512, err = 0¥nError Response:ReqNo=2, SeqNo=3,opvpErrorNo=-2

.. and nothing ever comes out of the printer. Any words of wisdom?

Ridgeland, does this work for network scanning?

Using UFRv2 on my 64bit ubuntu 10.04 works for network printing but not scanning. It looks likes ridgeland's solution is for usb scanning only. Can anyone confirm?

[cyberkost]

tried USB printing (the above was network printing) -- does not print with the same error message in var/log/cups/error_log

[your imaginary friend]

Hi Cyberkost,

Using v2.00 drivers (had v1.9 in prev post, i think) all i did was alien the 64bit rpm. worked beautifully.

your imaginary friend, I'm struggling making my Canon D480 print on 64-bit 10.04. It installs ok, cups sends the file, but I'm getting this in /var/log/cups/error_log:

E [08/Jun/2010:23:30:39 -0400] [Job 17] src = libcanon_pdlwrapper.c, line = 512, err = 0¥nError Response:ReqNo=2, SeqNo=3,opvpErrorNo=-2

.. and nothing ever comes out of the printer. Any words of wisdom?

[cyberkost]

I got v2.1 drivers when they become available and everything works now (including network printing) ... still need to figure out scanning though

[jbachman]

I'm having the same scanning issue as everyone else. I went through and installed the sane backend and had no luck with getting it to work so far.

If only canon would come to our aid and give us something to make it work.