Page 98 of 124 FirstFirst ... 488896979899100108 ... LastLast
Results 971 to 980 of 1236

Thread: ALSA Upgrade Script

  1. #971
    Join Date
    Jul 2008
    Location
    Budapest
    Beans
    64
    Distro
    Kubuntu 10.04 Lucid Lynx

    Re: ALSA Upgrade Script

    Hi!

    First of all thank you so much for making this script.

    I run into some issues however during the installation phase:

    Code:
    Making all in alsaconf
    make[1]: Entering directory `/usr/src/Alsa-1.0.23/alsa-utils-1.0.23/alsaconf'
    Making all in po
    make[2]: Entering directory `/usr/src/Alsa-1.0.23/alsa-utils-1.0.23/alsaconf/po'
    mv: cannot stat `t-ja.gmo': No such file or directory
    make[2]: *** [ja.gmo] Error 1
    make[2]: Leaving directory `/usr/src/Alsa-1.0.23/alsa-utils-1.0.23/alsaconf/po'
    make[1]: *** [all-recursive] Error 1
    make[1]: Leaving directory `/usr/src/Alsa-1.0.23/alsa-utils-1.0.23/alsaconf'
    make: *** [all-recursive] Error 1
    
    ***************************************************************************
    *  alsa-utils-1.0.23 make failed
    ***************************************************************************
    george@george-laptop:~/Downloads$
    I use Kubuntu 10.04 64 bit on a Dell XPS M1330 machine. Here is the URL to my ALSA information:

    http://www.alsa-project.org/db/?f=b0...4f7378096c2602


    I greatly appreciate any kind of help concerning this issue.
    Thank you.

  2. #972
    Join Date
    Jun 2007
    Beans
    11,490

    Re: ALSA Upgrade Script

    Mayybe this will help:
    Code:
    sudo touch /usr/src/Alsa-1.0.23/alsa-utils-1.0.23/alsaconf/po/t-ja.gmo

  3. #973
    Join Date
    Jul 2008
    Location
    Budapest
    Beans
    64
    Distro
    Kubuntu 10.04 Lucid Lynx

    Re: ALSA Upgrade Script

    Quote Originally Posted by Temüjin View Post
    Mayybe this will help:
    Code:
    sudo touch /usr/src/Alsa-1.0.23/alsa-utils-1.0.23/alsaconf/po/t-ja.gmo
    Hi!

    Thank you very much for your answer. Unfortunately I receive the same error message.

    I am quite puzzled cause to me it seems something with the script could be wrong or am I mistaken?

  4. #974
    Join Date
    Jun 2007
    Beans
    11,490

    Re: ALSA Upgrade Script

    Edit the script. Find this section:
    Code:
    #alsa-utils need to be compiled after lib installation!!#############################################################################
    header "Compiling utils..."
    cd $ALSASRCDIR/$UTILS
    make clean
    ./configure --prefix=/usr || die "$UTILS configure failed"
    make || die "$UTILS make failed"
    header "Installing utils..."
    make install
    Add --disable-nls to configure line:
    Code:
    ./configure --prefix=/usr --disable-nls || die "$UTILS configure failed"
    https://bugtrack.alsa-project.org/al...ew.php?id=1514
    Last edited by Temüjin; July 22nd, 2010 at 10:13 AM.

  5. #975
    Join Date
    Jul 2008
    Location
    Budapest
    Beans
    64
    Distro
    Kubuntu 10.04 Lucid Lynx

    Re: ALSA Upgrade Script

    Quote Originally Posted by Temüjin View Post
    Edit the script. Find this section:
    Code:
    #alsa-utils need to be compiled after lib installation!!#############################################################################
    header "Compiling utils..."
    cd $ALSASRCDIR/$UTILS
    make clean
    ./configure --prefix=/usr || die "$UTILS configure failed"
    make || die "$UTILS make failed"
    header "Installing utils..."
    make install
    Add --disable-nls to configure line:
    Code:
    ./configure --prefix=/usr --disable-nls || die "$UTILS configure failed"
    https://bugtrack.alsa-project.org/al...ew.php?id=1514

    ************************************************** *************************
    * Alsa packages sucessfully installed - reboot your system now
    ************************************************** *************************


    Thank you so so much for your help! I really appreciate it. Now my sound works like charm!

    Take care!

  6. #976
    Join Date
    Mar 2008
    Location
    Birmingham, UK
    Beans
    Hidden!

    Re: ALSA Upgrade Script

    Thanks a lot soundcheck! I now have HDMI audio on my M3N78-VM on an otherwise standard install of Lucid... That's been irritating me for ages.
    Desktop: Phenom 955 BE | GA-MA790XT-UD4P | 8GB TG Elite 1600 | BFG GTX 275
    Conky Screenshots | Last.fm | New to Ubuntu?

  7. #977
    Join Date
    May 2010
    Location
    Australia
    Beans
    28
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: ALSA Upgrade Script

    Im using Lucid on a brand new CompaqCQ42 Latop.
    The six months out of date ALSA does not work.

    I have 2 options :

    1) Butcher my system using this script. (sound does work then)

    or

    2) Install packages via synaptic/apt/dpkg etc.

    Fortunately there are up to date packages available on Launchpad :
    https://launchpad.net/~ricotz/+archive/unstable

    I have tested these packages & they do work.
    At least mere mortals can then downgrade/uninstall if problems occur.

    There is a bug lodged requesting (begging, pleading) back porting of up to date ALSA in Lucid.

    I won't hold my breath waiting for it though...

  8. #978
    Join Date
    Jan 2009
    Beans
    18

    Re: ALSA Upgrade Script

    Here is my ALSA info. http://www.alsa-project.org/db/?f=2d...53b201fd60d68d

    Could someone help me out?

    What am i doing wrong here. I followed the following steps;

    Short Alsa-Upgrade script install instructions:

    1. download the script and save it somewhere
    2. cd <your-download-dir>
    3. tar xvf AlsaUpgrade-1.0.23-2.tar
    4. sudo ./AlsaUpgrade-1.0.23-2.sh -d
    5. sudo ./AlsaUpgrade-1.0.23-2.sh -c -- I get the error below..
    6. sudo ./AlsaUpgrade-1.0.23-2.sh -i
    7. sudo shutdown -r 0


    Code:
    err0r@gr0undzer0:~/Downloads$ sudo ./AlsaUpgrade-1.0.23-2.sh -c
    
    
    **072310-19.10****Alsa-Upgrade-Script-1.0.23-2 *********************
    *
    * You'll be upgraded from Alsa 1.0.21. to 1.0.23
    *
    * Run -h option for further help and to look up the workflows
    *
    * Note1: Alsa won't be upgraded before you run the
    *        installation option -i!! 
    *        The upgrade procedure shouldn't have any effect on Alsa 
    *        until then. However - see Note2
    *
    * Note2: Do not delete the Alsa Source Directory under /usr/src!
    *        When starting the script the 2nd time with -d,
    *        the Alsa source dir will be deleted automatically!
    *        You won't have sound until you're done with that installation
    * 
    * DISCLAIMER: Use this script at your own risk. I do not take any 
    *             responsibility for any problems caused by running 
    *             this script. Before running this script I strongly 
    *             advise you to make a backup of your system.
    *             You might enter problems restoring the system to its
    *             original status when running the restore function 
    *             supplied by the script.  
    *                            
    *  
    ***************************************************************************
    
    
    Continue to configure and compile 1.0.23 [y/n]: y
    
    
    ***************************************************************************
    *  Alsa packages(drivers/lib/util/firmware/oss) will be compiled
    ***************************************************************************
    
    ***************************************************************************
    *  Prepare for compilation and installation...
    ***************************************************************************
    
    ***************************************************************************
    *  Compiling drivers...
    ***************************************************************************
    rm -f .depend *.o snd.map*
    rm -f modules/*.o modules/*.ko
    make: *** include: No such file or directory.  Stop.
    make: *** [clean] Error 1
    checking for gcc... gcc
    checking for C compiler default output file name... a.out
    checking whether the C compiler works... yes
    checking whether we are cross compiling... no
    checking for suffix of executables... 
    checking for suffix of object files... o
    checking whether we are using the GNU C compiler... yes
    checking whether gcc accepts -g... yes
    checking for gcc option to accept ISO C89... none needed
    checking for ranlib... ranlib
    configure: error: cannot find install-sh or install.sh in "." "./.." "./../.."
    
    ***************************************************************************
    *  alsa-driver-1.0.23 configure failed
    ***************************************************************************
    I tried following this guide http://www.alsa-project.org/main/ind...dule-hda-intel

    still i have no luck on making it work. ubuntu 10.04 doesn't have /etc/modules.conf nor /etc/conf.modules

    anyone help
    Last edited by syntax-error; July 23rd, 2010 at 02:51 PM.

  9. #979
    Join Date
    May 2010
    Beans
    6

    Arrow Re: ALSA Upgrade Script

    Hello, I am using the dreaded G210 trying to get HDMI audio out.
    So far I have run the script according to this thread, searched and tried every fix I can find, but still no luck. Most recently I have been trying to install 1.0.23 driver but it does not seem to stick.

    After compiling the snapshot I run the install and after awile I get the message saying that install was complete and i need to reboot. After reboot my driver is still 1.0.22.1 and my .log file is not in the tmp folder. Any advice?
    Code:
    **** List of PLAYBACK Hardware Devices ****
    card 2: CK804 [NVidia CK804], device 0: Intel ICH [NVidia CK804]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 2: CK804 [NVidia CK804], device 2: Intel ICH - IEC958 [NVidia CK804 - IEC958]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    That is the on-board sound. So its not even recognizing the Nvidia GPU as a sound card. (I have disabled the on-board with no positive effect.)

    Code:
    >more /etc/modprobe.d/alsa-base.conf
    # Ubuntu #62691, enable MPU for snd-cmipci
    options snd-cmipci mpu_port=0x330 fm_port=0x388
    # Keep snd-pcsp from being loaded as first soundcard
    options snd-pcsp index=-2
    alias snd-card-0 snd-hda-intel
    alias sound-slot-0 snd-hda-intel
    options snd-hda-intel enable_msi=0 probe_mask=0xffff,0xfff2
    That the last few lines of my alsa-base.conf I also made the file /etc/modprobe.d/sound.conf and added the same lines. I am not sure if that file is not depreciated, but i made it regardless.

    Any help would be much apreciated!

    p.s I have the option of returning this card and getting something like an ati 4350 if that will work easier.

  10. #980
    Join Date
    Jun 2007
    Beans
    11,490

    Re: ALSA Upgrade Script

    @syntax-error: are you sure you ran the script with -d option first? (with synaptic and/or other package managers closed)

    @NWK: it sounds like you have alsa-backports-modules package installed. Remove that and run the script again. Also see: http://wiki.xbmc.org/?title=HOW-TO_s...20%2C_or_GT240

Page 98 of 124 FirstFirst ... 488896979899100108 ... LastLast

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •