HOWTO Fix A Buggy DSDT File

[67GTA]

Can I trouble you for a fresh dsdt.dsl without any changes?

[ericw12]

Can I trouble you for a fresh dsdt.dsl without any changes?

Dumb me. Sure thing, here it is!

Thanks a lot!

[ericw12]

Dumb me. Sure thing, here it is!

Thanks a lot!

Any luck?

[67GTA]

Any luck?

edit

[67GTA]

Any luck?

Not yet. I've came up with the same results you did. Most of them seem to be Windows related, and probably not used by Linux anyway. Do you have any errors in your dmesg output? The kernel may still be working around them without any adverse effects.

[ericw12]

Not yet. I've came up with the same results you did. Most of them seem to be Windows related, and probably not used by Linux anyway. Do you have any errors in your dmesg output? The kernel may still be working around them without any adverse effects.

My windows and Linux works just fine. It is the OSX Snow leopard having a lot of problems. I use Chameleon "simulate" a mac book, so I do not have much errors. However, the sleep and speedstep etc do not work properly, and a proper DSDT suppose to fix them.

Anyway, here is the dmesg:

sudo dmesg
Password:
_table_max_displ = 73
[SleepEnabler] Registering PowerManagement dispatch table...
[SleepEnabler] in the event of a kernel panic, please use pmVersion...
[SleepEnabler] Calling pmInitComplete()...
NullCPUPowerManagement::init: properties=0xffffff8009a292c0
NullCPUPowerManagement::start
AppleACPICPU: ProcessorId=0 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=1 LocalApicId=1 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=0 Disabled
AppleACPICPU: ProcessorId=3 LocalApicId=0 Disabled
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.

MAC Framework successfully initialized
using 16384 buffer headers and 4096 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5] (S3)
mbinit: done (64 MB memory set for mbuf pool)
From path: "uuid",
Waiting for boot volume with UUID B1FE2C55-2955-359D-82D9-8790380FD616
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
netkas presents fakesmc, a kext which emulates smc device
com.apple.AppleFSCompressionTypeZlib load succeeded
FireWire runtime power conservation disabled. (2)
FireWire (OHCI) VendorID 1180 ID 832 PCI now active, GUID 5566778811223344; max speed s400.
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0/AppleACPIPCI/SATA@1F,2/AppleAHCI/PRT0@0/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/ST9320421AS Media/IOFDiskPartitionScheme/Untitled 2@2
BSD root: disk0s2, major 14, minor 1
jnl: unknown-dev: replay_journal: from: 2478592 to: 4247040 (joffset 0x97000)
jnl: unknown-dev: journal replay done.
Kernel is LP64
hfs: Removed 3 orphaned / unlinked files and 0 directories
systemShutdown false
Waiting for DSMOS...
NVDANV50HAL loaded and registered.
Apple16X50PCI3: Identified 1 Serial channels at PCI Bus=0 Dev=3 Func=3
Apple16X50UARTSync3: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
Apple16X50ACPI0: Identified Serial Port on ACPI Device=COM1
Apple16X50UARTSync0: Detected 16550AF/C/CF FIFO=16 MaxBaud=115200
Previous Shutdown Cause: 0
venderid: 0x8086 deviceid: 0x10f5.
Intel82566MM: Ethernet address 00:25:b3:4b:a4:7d
ring desc success: size->4096, virtual:5cd74000, phy:1778a000.
ring desc success: size->4096, virtual:5cf79000, phy:1778b000.
configure tx tdlen->4096.
configure rx rdlen->4096.
enable success.
DSMOS has arrived
VoodooBattery 1.3 (C) 2009 Superhai, All Rights Reserved. Jan 7 2010 23:18:58 64 bit
NTFS driver 3.2 [Flags: R/W].
NTFS volume name , version 3.1.
NTFS-fs warning (device /dev/disk0s1, pid 60): ntfs_system_inodes_get(): NTFS volume is dirty. You should unmount it and run chkdsk.
NTFS volume name New Volume, version 3.1.
NTFS-fs warning (device /dev/disk0s3, pid 235): ntfs_system_inodes_get(): NTFS volume is dirty. You should unmount it and run chkdsk.
FakeSMC: key info not found MSDS, length - 6
Intel82566MM info: Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX

kxld[com.google.filesystems.fusefs]: The following symbols are unresolved for this kext:
kxld[com.google.filesystems.fusefs]: _OSRuntimeFinalizeCPP
kxld[com.google.filesystems.fusefs]: _OSRuntimeInitializeCPP
Can't load kext com.google.filesystems.fusefs - link failed.
Failed to load executable for kext com.google.filesystems.fusefs.
Kext com.google.filesystems.fusefs failed to load (0xdc008016).
Failed to load kext com.google.filesystems.fusefs (error 0xdc008016).
ACPI_SMC_PlatformPlugin::start - waitForService(resourceMatching(AppleIntelCPUPower Management) timed out
vboxdrv: fAsync=0 offMin=0x873 offMax=0x5f9c
VBoxDrv: version 3.1.6 r59351; IOCtl version 0x100001; IDC version 0x10000; dev major=18
VBoxFltDrv: version 3.1.6 r59351
VBoxAdpDrv: version 3.1.6 r59351
erics-MacBook-Pro:~

[67GTA]

I don't see anything except for a ntfs partition that needs a file system check. I doubt this is dsdt related. You might give the OSX forums a try.

[Sentello]

Hello Fans of Ubuntu.
I have problem with my Ubuntu. Now I use Ubuntu 9.04 with my own DSDT.
I want update to Ubuntu 10.04, how? How I can apply my DSDT in to Ubntu 10.04.
sorry for my BAD English

[ericwwheeler]

Then we need to get a copy of your current DSDT and save it in your home folder with this command Code:
sudo cat /proc/acpi/dsdt > dsdt.dat
I ran this command and it returned:

sudo cat /proc/acpi/dsdt > dsdt.dat
cat: /proc/acpi/dsdt: No such file or directory

I am working on installing 10.4 on a friend's Toshiba Satellite L505D-S5983. I have to add noacpi and acpi=off just to get it to boot but am unsure how to find this dsdt file. Any help would be appreciated. I am not sure what other information is necessary but I can follow explicit instructions if you would be willing to help.

[macky_reddy]

Attachment 152222

Attachment 152223

Attachment 152224

Attachment 152225

Attachment 152226

Thanks for ur support appreciated mate