This guide will help you fix your DSDT file to fix common ACPI problems on any Debian based OS. With Mint 6/Ubuntu 8.10, I started having a lot of problems with my laptop thermal temps, and not wanting to boot without holding down a keyboard key. This was in my case because of a buggy DSDT file. To read more about ACPI/DSDT go here: http://forums.opensuse.org/how-faq-r...uggy-dsdt.html It is the catalyst behind this how to. The process is a little different for Debian based operating systems. This how to will show you how to do it with Mint/Ubuntu.
WARNING: This might mess up your operating system. Even if you have zero errors after fixing the DSDT, it may still cause you to not be able to boot your OS. It will not harm your PC or hardware.
Before trying this tutorial, try updating your BIOS to fix bugs first. This is a last resort to try and manually fix DSDT related bugs.
The first thing we need to do is install the Intel DSDT compiler. Open a terminal and runThen we need to get a copy of your current DSDT and save it in your home folder with this commandCode:sudo apt-get install iaslThen we will disassemble it with iasl with this commandCode:sudo cat /proc/acpi/dsdt > dsdt.datYou should now have a file called dsdt.dsl in your home folder. This is the file you will be editing. Once you are done making changes, we will use it to make a new DSDT file. The next step is to use iasl to recompile the dsdt.dsl file to see any errors/warnings/optimizations with this command. Replace <yourusername> with your username.Code:iasl -d dsdt.dat
This will show you the output of the recompiling process. At this point, you can use the output to find errors in the DSDT and attempt to fix them by editing the dsdt.dsl file with your favorite text editor. Go into the preferences for your text editor and turn on "line numbering". Then open dsdt.dsl with your text editor. You can use the output of the last command to find the errors by their line number. The following is an example of a common error. "dsdt.dsl 349" means the error is on line 349 of the dsdt.dsl file. Go to that line in your dsdt.dsl file with the text editor to fix it and save.Code:iasl -tc /home/<yourusername>/dsdt.dsl
Each time you make a change in the dsdt.dsl file, be sure to save it, and then recompile to see the new output withCode:dsdt.dsl 349: Method (\_WAK, 1, NotSerialized) Warning 1079 - ^ Reserved method must return a value (_WAK)This will recompile it with the new changes and give you a new output to see if things look better Below are several links with common DSDT errors and their fixes.Code:iasl -tc /home/<yourusername>/dsdt.dsl
You might get lucky and find one already fixed for your make/model here: http://acpi.sourceforge.net/dsdt/view.php If so then you can skip to the last two commands.
Once you have successfully edited the dsdt.dsl file, we should have a dsdt.aml in your home folder. This was the goal of the how to.
WARNING: The commands up till this point have not made any changes to your system. You can simply delete the files that have been created. After the last two commands, you will be using a custom DSDT at boot. This is the point of no return.
These commands will rename the dsdt.aml file and copy it to your /etc/initramfs-tools folder. Then we will update the initrd image to include the DSDT override at boot. The very last command will update the initrd image. You need to replace "kernel version" with your kernel version. You can see it by runningin a terminal.Code:uname -r
Code:sudo cp dsdt.aml /etc/initramfs-tools/DSDT.amlNow cross your fingers and reboot To see if it stuck, you can look in your dmesg output. Open a terminal and runCode:sudo update-initramfs -u -k kernel-versionThis will put your dmesg output into a text file on your desktop. You should see a line similar to this:Code:dmesg > /home/yourusername/Desktop/dmesg
Places to check before and after are: dmesg output and /proc/acpi. I would especially check /proc/acpi/fan and /proc/acpi/thermal_zone to see if they are populated after this tutorial if they weren't before. Another trick I've learned during this process is to specify the operating system at boot. More about this is explained in the links I provided. I found that by addingCode:[ 0.020495] ACPI: Checking initramfs for custom DSDT [ 0.353464] ACPI: Found DSDT in DSDT.aml. [ 0.353470] ACPI: Override [DSDT- MCP67], this is unsafe: tainting kernel [ 0.353478] ACPI: Table DSDT replaced by host OS [ 0.353482] ACPI: DSDT 00000000, 7CB3 (r1 NVIDIA MCP67 6040000 INTL 20061109) [ 0.353487] ACPI: DSDT override uses original SSDTs unless "acpi_no_auto_ssdt"to the boot options, the operating system even saw my hardware differently at boot. This seems to be very affective on HP laptops with Vista preinstalled. I outlined these steps here: http://www.linuxmint.com/forum/viewt...p?f=60&t=18222 The DSDT code is very hard to read, and I myself don't understand all of it. I left my HP desktop with 0 errors, and 4 warnings. Everything works, so I left the warnings. My laptop DSDT is perfect. It is a HP dv6815nr if someone with the same model wants to use my custom DSDT file. DSDT files are PC specific. Do not try using a DSDT from another PC unless it has the same hardware as yours.Code:acpi_osi="Linux"
EDIT: To remove a custom DSDT, delete the DSDT.aml file withand reupdate the init image withCode:sudo rm /etc/initramfs-tools/DSDT.amlThis will revert your system back to the original state after a reboot.Code:sudo update-initramfs -u -k kernel-version
EDIT: This will not work with kernels that are still in development. The patches that allow the custom DSDT are not included until the kernel is released as "stable".
UPDATE: The kernel dev's will no longer use the patch to enable custom DSDT files for Karmic 9.10 and beyond. Jaunty 9.04 is the last version this will work on. You are urged to file a bug report for DSDT errors.