rito thanks got wvdial installed and when i first fire the computer i get these results followed by the second when i try to run wvdial again
jonno-dean@jonno-dean-laptop:~$ sudo wvdial
[sudo] password for jonno-dean:
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT&F &D2 &C1
AT&F &D2 &C1
OK
--> Sending: ATS7=60 S30=0 S0=0
ATS7=60 S30=0 S0=0
OK
--> Sending: AT+CGDCONT=1,"IP","TELSTRA.BIGPOND"
AT+CGDCONT=1,"IP","TELSTRA.BIGPOND"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
--> Disconnecting at Sun Dec 6 07:28:29 2009
jonno-dean@jonno-dean-laptop:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot open /dev/ttyUSB1: No such file or directory
--> Cannot open /dev/ttyUSB1: No such file or directory
--> Cannot open /dev/ttyUSB1: No such file or directory
also run lusb and the modem is gone
jonno-dean@jonno-dean-laptop:~$ lsusb
Bus 007 Device 002: ID 045e:0039 Microsoft Corp. IntelliMouse Optical
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 090c:f371 Feiya Technology Corp.
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. Mass Stroage Device
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
dmesg
[ 166.219605] wlan0: associated
[ 166.584037] usb 2-1: device descriptor read/64, error -110
[ 181.812053] usb 2-1: device descriptor read/64, error -110
[ 182.028044] usb 2-1: reset high speed USB device using ehci_hcd and address 3
[ 192.436042] usb 2-1: device not accepting address 3, error -110
[ 192.548055] usb 2-1: reset high speed USB device using ehci_hcd and address 3
[ 202.968047] usb 2-1: device not accepting address 3, error -110
[ 202.968088] usb 2-1: USB disconnect, address 3
[ 203.080044] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 218.192052] usb 2-1: device descriptor read/64, error -110
[ 233.408058] usb 2-1: device descriptor read/64, error -110
[ 233.624047] usb 2-1: new high speed USB device using ehci_hcd and address 5
[ 248.736069] usb 2-1: device descriptor read/64, error -110
[ 263.952073] usb 2-1: device descriptor read/64, error -110
[ 264.168059] usb 2-1: new high speed USB device using ehci_hcd and address 6
[ 274.576032] usb 2-1: device not accepting address 6, error -110
[ 274.688045] usb 2-1: new high speed USB device using ehci_hcd and address 7
[ 285.096055] usb 2-1: device not accepting address 7, error -110
[ 285.096081] hub 2-0:1.0: unable to enumerate USB device on port 1
[ 285.364547] usb 6-1: new full speed USB device using uhci_hcd and address 2
[ 300.484039] usb 6-1: device descriptor read/64, error -110
[ 315.700024] usb 6-1: device descriptor read/64, error -110
[ 315.916732] usb 6-1: new full speed USB device using uhci_hcd and address 3
[ 331.028047] usb 6-1: device descriptor read/64, error -110
[ 346.244063] usb 6-1: device descriptor read/64, error -110
[ 346.460053] usb 6-1: new full speed USB device using uhci_hcd and address 4
[ 356.868043] usb 6-1: device not accepting address 4, error -110
[ 356.980059] usb 6-1: new full speed USB device using uhci_hcd and address 5
[ 367.388040] usb 6-1: device not accepting address 5, error -110
[ 367.388064] hub 6-0:1.0: unable to enumerate USB device on port 1
thanks
also in >places >computer i have generic multi card and zte mmc storage and after the first run of wvdial
one of them drops out sometimes it is generic multi card and others it is zte mmc storage that drops out
i dont now how you guys do this computer programing stuff all the time, you deserve a medal.
Bookmarks