Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: quines ordres hi ha per mesurar temperatures?

  1. #11
    Join Date
    Aug 2005
    Location
    Països Catalans
    Beans
    1,530
    Distro
    Ubuntu 10.04 Lucid Lynx

    Re: quines ordres hi ha per mesurar temperatures?

    o amb comandes simples:

    cat /proc/acpi/thermal_zone/THRM/temperature
    Carles Oriol i Margarit

  2. #12
    Join Date
    Oct 2008
    Location
    Noguera i Garraf
    Beans
    335
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: quines ordres hi ha per mesurar temperatures?

    Quote Originally Posted by Tomàs M. View Post
    A veure si et serveix http://ubuntuguide.org/wiki/Ubuntu:F...8lm-sensors.29 i després "afegir al quadre - hardware sensors monitor"; jo hi tinc temperatures i velocitats de ventiladors i també s'hi poden afegir voltatges i no sé si més coses.

    Sembla ser que no tinc tots els sensors que cal segons el que ve a continuació. Avui he d'anar a la botiga on vaig comprar-lo per dir-los els problemes que he trobat. He de reclamar alguna cosa sobre sensors?

    joan@joan-laptop:/media/disk/ubuntu$ sudo sensors-detect
    # sensors-detect revision 5249 (2008-05-11 22:56:25 +0200)

    This program will help you determine which kernel modules you need
    to load to use lm_sensors most effectively. It is generally safe
    and recommended to accept the default answers to all questions,
    unless you know what you're doing.

    We can start with probing for (PCI) I2C or SMBus adapters.
    Do you want to probe now? (YES/no): YES
    Probing for PCI bus adapters...
    Use driver `i2c-i801' for device 0000:00:1f.3: Intel ICH9

    We will now try to load each adapter module in turn.
    Module `i2c-i801' already loaded.
    If you have undetectable or unsupported I2C/SMBus adapters, you can have
    them scanned by manually loading the modules before running this script.

    We are now going to do the I2C/SMBus adapter probings. Some chips may
    be double detected; we choose the one with the highest confidence
    value in that case.
    If you found that the adapter hung after probing a certain address,
    you can specify that address to remain unprobed.

    Next adapter: SMBus I801 adapter at 1c00 (i2c-0)
    Do you want to scan it? (YES/no/selectively): YES
    Client found at address 0x50
    Probing for `Analog Devices ADM1033'... No
    Probing for `Analog Devices ADM1034'... No
    Probing for `SPD EEPROM'... Yes
    (confidence 8, not a hardware monitoring chip)
    Probing for `EDID EEPROM'... No
    Client found at address 0x52
    Probing for `Analog Devices ADM1033'... No
    Probing for `Analog Devices ADM1034'... No
    Probing for `SPD EEPROM'... Yes
    (confidence 8, not a hardware monitoring chip)
    Probing for `EDID EEPROM'... No

    Some chips are also accessible through the ISA I/O ports. We have to
    write to arbitrary I/O ports to probe them. This is usually safe though.
    Yes, you do have ISA I/O ports even if you do not have any ISA slots!
    Do you want to scan the ISA I/O ports? (YES/no): YES
    Probing for `National Semiconductor LM78' at 0x290... No
    Probing for `National Semiconductor LM78-J' at 0x290... No
    Probing for `National Semiconductor LM79' at 0x290... No
    Probing for `Winbond W83781D' at 0x290... No
    Probing for `Winbond W83782D' at 0x290... No
    Probing for `IPMI BMC KCS' at 0xca0... No
    Probing for `IPMI BMC SMIC' at 0xca8... No

    Some Super I/O chips may also contain sensors. We have to write to
    standard I/O ports to probe them. This is usually safe.
    Do you want to scan for Super I/O sensors? (YES/no): YES
    Probing for Super-I/O at 0x2e/0x2f
    Trying family `National Semiconductor'... No
    Trying family `SMSC'... No
    Trying family `VIA/Winbond/Fintek'... No
    Trying family `ITE'... No
    Probing for Super-I/O at 0x4e/0x4f
    Trying family `National Semiconductor'... No
    Trying family `SMSC'... No
    Trying family `VIA/Winbond/Fintek'... No
    Trying family `ITE'... No

    Some south bridges, CPUs or memory controllers may also contain
    embedded sensors. Do you want to scan for them? (YES/no): YES
    Silicon Integrated Systems SIS5595... No
    VIA VT82C686 Integrated Sensors... No
    VIA VT8231 Integrated Sensors... No
    AMD K8 thermal sensors... No
    AMD K10 thermal sensors... No
    Intel Core family thermal sensor... Success!
    (driver `coretemp')
    Intel AMB FB-DIMM thermal sensor... No

    Now follows a summary of the probes I have just done.
    Just press ENTER to continue:

    Driver `coretemp' (should be inserted):
    Detects correctly:
    * Chip `Intel Core family thermal sensor' (confidence: 9)

    I will now generate the commands needed to load the required modules.
    Just press ENTER to continue:

    To load everything that is needed, add this to /etc/modules:

    #----cut here----
    # Chip drivers
    coretemp
    #----cut here----

    Do you want to add these lines automatically? (yes/NO)YES
    joan@joan-laptop:/media/disk/ubuntu$ sudo /etc/init.d/module-init-tools
    * Loading kernel modules... * Loading manual drivers... [ OK ]
    joan@joan-laptop:/media/disk/ubuntu$ sudo sensors -s
    joan@joan-laptop:/media/disk/ubuntu$ sudo sensors
    coretemp-isa-0000
    Adapter: ISA adapter
    Core 0: +31.0°C (high = +100.0°C, crit = +100.0°C)

    coretemp-isa-0001
    Adapter: ISA adapter
    Core 1: +31.0°C (high = +100.0°C, crit = +100.0°C)

    joan@joan-laptop:/media/disk/ubuntu$

    ------------------------------------------
    He seguit fins al final i he instal·lat el GKrellM i tinc molta informació, sense sensor del ventilador i no sé si hi manquen més coses.

  3. #13
    Join Date
    Oct 2008
    Location
    Noguera i Garraf
    Beans
    335
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: quines ordres hi ha per mesurar temperatures?

    Quote Originally Posted by CarlesOriol View Post
    o amb comandes simples:

    cat /proc/acpi/thermal_zone/THRM/temperature
    Tinc el directori però no tinc el fitxer:

    joan@joan-laptop:/media/disk/ubuntu$ cat /proc/acpi/thermal_zone/THRM/temperature
    cat: /proc/acpi/thermal_zone/THRM/temperature: No such file or directory
    joan@joan-laptop:/media/disk/ubuntu$

    joan@joan-laptop:/proc/acpi/thermal_zone$ ls -l
    total 0
    joan@joan-laptop:/proc/acpi/thermal_zone$

Page 2 of 2 FirstFirst 12

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •