Hey!
I've a problem with moblock: it worked quiet good for a while till i installed it inside a vm. the vm is connected to the network over NAT.
The Problem now is: DNS Resolution is broken, when i activate moblock it stops working, when i stop it it works again...
i tried to reconfigure it with dpkg-reconfigure moblock, but nothing happens?
The moblock-config status:
Code:
alm@defiant:~$ sudo moblock-control status
Current iptables rules (this may take awhile):
Chain INPUT (policy ACCEPT 551K packets, 179M bytes)
pkts bytes target prot opt in out source destination
0 0 moblock_in all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW MARK match !0x14
Chain FORWARD (policy ACCEPT 0 packets, 0 bytes)
pkts bytes target prot opt in out source destination
0 0 moblock_fw all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW MARK match !0x14
Chain OUTPUT (policy ACCEPT 909K packets, 1154M bytes)
pkts bytes target prot opt in out source destination
3 180 moblock_out all -- * * 0.0.0.0/0 0.0.0.0/0 state NEW MARK match !0x14
Chain moblock_fw (1 references)
pkts bytes target prot opt in out source destination
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 MARK match 0xa
0 0 NFQUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 92
Chain moblock_in (1 references)
pkts bytes target prot opt in out source destination
0 0 DROP all -- * * 0.0.0.0/0 0.0.0.0/0 MARK match 0xa
0 0 NFQUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 92
Chain moblock_out (1 references)
pkts bytes target prot opt in out source destination
0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 MARK match 0xa reject-with icmp-port-unreachable
0 0 RETURN tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:443
0 0 RETURN tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:80
3 180 NFQUEUE all -- * * 0.0.0.0/0 0.0.0.0/0 NFQUEUE num 92
i did not whitelist lan traffic, but this wasn't a problem in the previous installation...
I'd really appreciate the help,
semteX
Bookmarks