Favux,
sorry for long post....
i am using firefox to start in kiosk... just experimenting with touch screen. the procedure i followed uses fluxbox for gui i think it is not x11... it might have come with the mini ISO... i am not expert in it yet.
as for the browser it is firefox...
here is another screen shot for drivers... maybe it might help...
this link http://www.tuxum.org/browser/tuxum/non-free/egalax32
talks about how to create a driver for egalax screen, but i don't know if it applies to my kernel...
xxxxxx@ubuntu:~$ lsusb -v -d 0eef:0001
Bus 002 Device 002: ID 0eef:0001 D-WAV Scientific Co., Ltd eGalax TouchScreen
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.10
bDeviceClass 0 (Defined at Interface level)
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0eef D-WAV Scientific Co., Ltd
idProduct 0x0001 eGalax TouchScreen
bcdDevice 1.00
iManufacturer 1 eGalax Inc.
iProduct 2 USB TouchController
iSerial 0
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 34
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 1 eGalax Inc.
bmAttributes 0xa0
(Bus Powered)
Remote Wakeup
MaxPower 100mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 3 Human Interface Device
bInterfaceSubClass 0 No Subclass
bInterfaceProtocol 0 None
iInterface 0
HID Device Descriptor:
bLength 9
bDescriptorType 33
bcdHID 2.10
bCountryCode 0 Not supported
bNumDescriptors 1
bDescriptorType 34 Report
wDescriptorLength 141
Report Descriptors:
** UNAVAILABLE **
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type None
Usage Type Data
wMaxPacketSize 0x0008 1x 8 bytes
bInterval 3
Device Status: 0x0000
(Bus Powered)
xxxxxxx@ubuntu:~$
i guess these point to drivers?
xxxxxxx@ubuntu:/proc/bus/input$ cat devices
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=PNP0C0C/button/input0
S: Sysfs=/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
U: Uniq=
H: Handlers=kbd event0
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0019 Vendor=0000 Product=0001 Version=0000
N: Name="Power Button"
P: Phys=LNXPWRBN/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
U: Uniq=
H: Handlers=kbd event1
B: PROP=0
B: EV=3
B: KEY=100000 0 0 0
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/devices/platform/i8042/serio0/input/input2
U: Uniq=
H: Handlers=sysrq kbd event2
B: PROP=0
B: EV=120013
B: KEY=4 2000000 3803078 f800d001 feffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=0eef Product=0001 Version=0210
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-0000:00:1d.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input3
U: Uniq=
H: Handlers=mouse0 event3 js0
B: PROP=0
B: EV=1b
B: KEY=30000 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0003 Vendor=0eef Product=0001 Version=0210
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-0000:00:1d.0-1/input0
S: Sysfs=/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input4
U: Uniq=
H: Handlers=mouse1 event4
B: PROP=0
B: EV=1b
B: KEY=401 0 0 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0011 Vendor=0002 Product=0005 Version=0000
N: Name="ImPS/2 Generic Wheel Mouse"
P: Phys=isa0060/serio1/input0
S: Sysfs=/devices/platform/i8042/serio1/input/input5
U: Uniq=
H: Handlers=mouse2 event5
B: PROP=0
B: EV=7
B: KEY=70000 0 0 0 0 0 0 0 0
B: REL=103
xxxxxx@ubuntu:/proc/bus/input$
is there a way to verify if it is the driver that is bad?
In my case i can see the axis being inverted...
and i am trying to understan if i can callibrate the screen with no X, xorg.conf
from what i read, the points and axis are in xorg.conf.... right?
thanks for your feedback
Bookmarks