GRUB: Ubuntu after Vista = Vista gone!

[Fleuris]

Hello,

I've a problem, I have a new PC with a 750GB SATA disk, with 3 partitions on it:

1st partition: 200GB: Windows Vista Ultimate 32-bit (NTFS)
2nd partition: 150GB: Linux Ubuntu 8.10 (Bèta) 32-bit (EXT3)
3rd partition: 400GB: Storage & Backup (NTFS)

First, I installed Vista, then, when the Bèta was released, I installed Ubuntu 8.10 Bèta (it is great btw). But the GRUB doesn't show Vista in the list (you know, when the pc boots, you get a screen where you can select the OS you want to boot). I already tried modifying the menu.lst, and reïnstall the GRUB, reïnstall the Windows Boot Loader, overwrite the MBR, etc. But I can't get Vista to boot!!

In the 'fresh' menu.lst, there was no Vista at all, and when I do it manually it can't recognize the device. Except when I say the Windows root is (hd0,2). But then 'something' says that bootmngr is missing. Ubuntu 8.10 however is in the list, and boots perfectly.

Both Ubuntu and Vista partitions can be removed (there's no important data on them), but the 3rd partition HAS TO REMAIN WERE IT IS! Only in case of emergency I can back-up the back-ups to another HDD.

I hope you can help me, I use Vista for games, and I game a lot!

Fleuris

[adrian15]

1st partition: 200GB: Windows Vista Ultimate 32-bit (NTFS)
2nd partition: 150GB: Linux Ubuntu 8.10 (Bèta) 32-bit (EXT3)
3rd partition: 400GB: Storage & Backup (NTFS)

But I can't get Vista to boot!!

If you are right about Vista being in the first partition check: http://www.supergrubdisk.org/wiki/Ho...#Grub_solution

If it still does not work activate the Vista partition from the Super Grub Disk's Boot & Tools -> Activate partitions menu.

If it still does not work please post Hard Disks partition layout from Super Grub Disk point of view.


adrian15

[Fleuris]

If you are right about Vista being in the first partition check: http://www.supergrubdisk.org/wiki/Ho...#Grub_solution

If it still does not work activate the Vista partition from the Super Grub Disk's Boot & Tools -> Activate partitions menu.

If it still does not work please post Hard Disks partition layout from Super Grub Disk point of view.


adrian15

I'll try that, thanks!

I've just tried installing Ubuntu 8.04 on another partition, but even that won't work. The GRUB shows both Ubuntu's, but no Windows Vista!

[caljohnsmith]

If it still does not work activate the Vista partition from the Super Grub Disk's Boot & Tools -> Activate partitions menu.

adrian15

Just out of curiosity, I followed that link you give above for "activate partitions", and it doesn't say what is does; does it set the boot flag on the partition, i.e. make it the "active" partition?

[adrian15]

Just out of curiosity, I followed that link you give above for "activate partitions", and it doesn't say what is does; does it set the boot flag on the partition, i.e. make it the "active" partition?

Yes, you are right.

[adrian15]

I'll try that, thanks!

I've just tried installing Ubuntu 8.04 on another partition, but even that won't work. The GRUB shows both Ubuntu's, but no Windows Vista!

Try it and Vista entry will appear. Depending on your setup it might boot or not (multiple hard disk give some headaches sometimes).

adrian15

[Fleuris]

All right, I tried everything you wrote, and nothing has worked!

I made my menu.lst look like this: (this is my menu.lst)

## ## End Default Options ##

title Ubuntu intrepid (development branch), kernel 2.6.27-7-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=2449953c-591f-4d3d-a048-3a216f7755ea ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Ubuntu intrepid (development branch), kernel 2.6.27-7-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=2449953c-591f-4d3d-a048-3a216f7755ea ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu intrepid (development branch), kernel 2.6.27-4-generic
root (hd0,5)
kernel /boot/vmlinuz-2.6.27-4-generic root=UUID=2449953c-591f-4d3d-a048-3a216f7755ea ro quiet splash
initrd /boot/initrd.img-2.6.27-4-generic
quiet

title Ubuntu intrepid (development branch), kernel 2.6.27-4-generic (recovery mode)
root (hd0,5)
kernel /boot/vmlinuz-2.6.27-4-generic root=UUID=2449953c-591f-4d3d-a048-3a216f7755ea ro single
initrd /boot/initrd.img-2.6.27-4-generic

title Ubuntu intrepid (development branch), memtest86+
root (hd0,5)
kernel /boot/memtest86+.bin
quiet

title Windows
rootnoverify (hd0,0)
makeactive
chainloader +1
boot

### END DEBIAN AUTOMAGIC KERNELS LIST

But when I try to boot Windows, it says: "Error 12: Invalid device requested"

The I tried to activate the partition with my Windows (hd0,4), but then it also says: "Error 12: Invalid device requested" this message is in the SGD.

Now, here is my layout, I hope you can help me out:

fdisdklu
6 (hd0,5) ext2fs 141GB Ubuntu inteprid (development branch) \n \l
pause SGD has succeeded!
SGD has succeeded!

And here is my overview of my partitions, from SGD:

N IDE SCSI GRUB HURD TYPE SIZE OS
3 hda3 sda3 (hd0,2) hd0s3 NTFS 356GB Windows
5 hda5 sda5 (hd0,4) hd0s5 NTFS 195GB Windows
6 hda6 sda6 (hd0,5) hd0s6 ext2fs 141GB Ubuntu inteprid
7 hda7 sda7 (hd0,6) hd0s7 Swap 4GB

[caljohnsmith]

It would help if you could post:

sudo fdisk -lu

Which I assume is what the SGD output you posted is, but it shows your Windows is not on sda1; you have two NTFS partitions, sda3 and sda5 according to SGD. Do you know which one is Vista? Try changing your Windows entry in your menu.lst to:

title Windows Vista
rootnoverify (hd0,2)
makeactive
chainloader +1

And let me know what happens when you try it on start up. If it doesn't work, please post the output of:

sudo mount /dev/sda3 /mnt
ls -l /mnt

Note "-l" is a lowercase L, not a one.

[adrian15]

But when I try to boot Windows, it says: "Error 12: Invalid device requested"

Can you please remove the makeactive line and see what it happens?

The I tried to activate the partition with my Windows (hd0,4), but then it also says: "Error 12: Invalid device requested" this message is in the SGD.

Interesting.

Now, here is my layout, I hope you can help me out:

If you use 0.9766 SGD version I definitely need to fix it because it should show you all the lines and not only one line.

And here is my overview of my partitions, from SGD:

From Boot & Tools -> Show Partitions menu, isn't it?

Let's see you can try this on your menu.lst (see that there is not a makeactive command):

title win
rootnoverify (hd0,2)
chainloader +1
boot

adrian15

[Fleuris]

Here is the result of 'sudo fdisk -lu':

Disk /dev/sda: 750.1 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Disk identifier: 0x6570e6d8

Device Boot Start End Blocks Id System
/dev/sda1 16065 716788169 358386052+ f W95 Ext'd (LBA)
/dev/sda3 * 716802048 1465145343 374171648 7 HPFS/NTFS
/dev/sda5 16128 409593239 204788556 7 HPFS/NTFS
/dev/sda6 409593303 707036714 148721706 83 Linux
/dev/sda7 707036778 716788169 4875696 82 Linux swap / Solaris

result of /mnt:

total 28
drwxrwxrwx 1 root root 0 2008-10-13 21:55 Backup
drwxrwxrwx 1 root root 4096 2008-10-11 14:40 Bewaar
drwxrwxrwx 1 root root 0 2008-10-13 23:36 Boot
drwxrwxrwx 1 root root 12288 2008-10-12 18:35 Downloads
drwxrwxrwx 1 root root 4096 2008-10-11 12:41 Games
drwxrwxrwx 1 root root 0 2008-10-11 23:10 Muziek
drwxrwxrwx 1 root root 0 2008-10-12 10:12 $RECYCLE.BIN
drwxrwxrwx 1 root root 0 2008-10-11 16:37 RECYCLER
drwxrwxrwx 1 root root 4096 2008-10-11 14:36 System Volume Information
drwxrwxrwx 1 root root 4096 2008-10-12 18:12 Torrent

sda3 is my backup partition, sda5 is the partition with windows vista on it. I already tried 'rootnoverify (hd0,2)', is says that BOOTMNGR is missing, when I reinstall the Vista bootmanager, it doesn't help. But I will try it without 'makeactive'

I'm using the newest version of SGD (downloaded 2 days ago)

I'm now going to try booting without the 'makeactive' command.