Code:
#
# bash_completion - programmable completion functions for bash 3.2+
#
# Copyright © 2006-2008, Ian Macdonald <ian@caliban.org>
# © 2009-2011, Bash Completion Maintainers
# <bash-completion-devel@lists.alioth.debian.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2, or (at your option)
# any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software Foundation,
# Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
#
# The latest version of this software can be obtained here:
#
# http://bash-completion.alioth.debian.org/
#
# RELEASE: 1.3
if [[ $- == *v* ]]; then
BASH_COMPLETION_ORIGINAL_V_VALUE="-v"
else
BASH_COMPLETION_ORIGINAL_V_VALUE="+v"
fi
if [[ -n $BASH_COMPLETION_DEBUG ]]; then
set -v
else
set +v
fi
# Alter the following to reflect the location of this file.
#
[ -n "$BASH_COMPLETION" ] || BASH_COMPLETION=/etc/bash_completion
[ -n "$BASH_COMPLETION_DIR" ] || BASH_COMPLETION_DIR=/etc/bash_completion.d
[ -n "$BASH_COMPLETION_COMPAT_DIR" ] || BASH_COMPLETION_COMPAT_DIR=/etc/bash_completion.d
readonly BASH_COMPLETION BASH_COMPLETION_DIR BASH_COMPLETION_COMPAT_DIR
# Set a couple of useful vars
#
UNAME=$( uname -s )
# strip OS type and version under Cygwin (e.g. CYGWIN_NT-5.1 => Cygwin)
UNAME=${UNAME/CYGWIN_*/Cygwin}
case ${UNAME} in
Linux|GNU|GNU/*) USERLAND=GNU ;;
*) USERLAND=${UNAME} ;;
esac
# Turn on extended globbing and programmable completion
shopt -s extglob progcomp
# A lot of the following one-liners were taken directly from the
# completion examples provided with the bash 2.04 source distribution
# Make directory commands see only directories
complete -d pushd
# The following section lists completions that are redefined later
# Do NOT break these over multiple lines.
#
# START exclude -- do NOT remove this line
# bzcmp, bzdiff, bz*grep, bzless, bzmore intentionally not here, see Debian: #455510
complete -f -X '!*.?(t)bz?(2)' bunzip2 bzcat pbunzip2 pbzcat
complete -f -X '!*.@(zip|[ejw]ar|exe|pk3|wsz|zargo|xpi|sxw|o[tx]t|od[fgpst]|epub|apk)' unzip zipinfo
complete -f -X '*.Z' compress znew
# zcmp, zdiff, z*grep, zless, zmore intentionally not here, see Debian: #455510
complete -f -X '!*.@(Z|[gGd]z|t[ag]z)' gunzip zcat unpigz
complete -f -X '!*.Z' uncompress
# lzcmp, lzdiff intentionally not here, see Debian: #455510
complete -f -X '!*.@(tlz|lzma)' lzcat lzegrep lzfgrep lzgrep lzless lzmore unlzma
complete -f -X '!*.@(?(t)xz|tlz|lzma)' unxz xzcat
complete -f -X '!*.lrz' lrunzip
complete -f -X '!*.@(gif|jp?(e)g|miff|tif?(f)|pn[gm]|p[bgp]m|bmp|xpm|ico|xwd|tga|pcx)' ee
complete -f -X '!*.@(gif|jp?(e)g|tif?(f)|png|p[bgp]m|bmp|x[bp]m|rle|rgb|pcx|fits|pm)' xv qiv
complete -f -X '!*.@(@(?(e)ps|?(E)PS|pdf|PDF)?(.gz|.GZ|.bz2|.BZ2|.Z))' gv ggv kghostview
complete -f -X '!*.@(dvi|DVI)?(.@(gz|Z|bz2))' xdvi kdvi
complete -f -X '!*.dvi' dvips dviselect dvitype dvipdf advi dvipdfm dvipdfmx
complete -f -X '!*.[pf]df' acroread gpdf xpdf
complete -f -X '!*.@(?(e)ps|pdf)' kpdf
complete -f -X '!*.@(@(?(e)ps|?(E)PS|[pf]df|[PF]DF|dvi|DVI)?(.gz|.GZ|.bz2|.BZ2)|cb[rz]|djv?(u)|gif|jp?(e)g|miff|tif?(f)|pn[gm]|p[bgp]m|bmp|xpm|ico|xwd|tga|pcx|fdf)' evince
complete -f -X '!*.@(okular|@(?(e|x)ps|?(E|X)PS|pdf|PDF|dvi|DVI|cb[rz]|CB[RZ]|djv?(u)|DJV?(U)|dvi|DVI|gif|jp?(e)g|miff|tif?(f)|pn[gm]|p[bgp]m|bmp|xpm|ico|xwd|tga|pcx|GIF|JP?(E)G|MIFF|TIF?(F)|PN[GM]|P[BGP]M|BMP|XPM|ICO|XWD|TGA|PCX|epub|EPUB|odt|ODT|fb?(2)|FB?(2)|mobi|MOBI|g3|G3|chm|CHM|fdf|FDF)?(.?(gz|GZ|bz2|BZ2)))' okular
complete -f -X '!*.@(?(e)ps|pdf)' ps2pdf ps2pdf12 ps2pdf13 ps2pdf14 ps2pdfwr
complete -f -X '!*.texi*' makeinfo texi2html
complete -f -X '!*.@(?(la)tex|texi|dtx|ins|ltx)' tex latex slitex jadetex pdfjadetex pdftex pdflatex texi2dvi
complete -f -X '!*.mp3' mpg123 mpg321 madplay
complete -f -X '!*@(.@(mp?(e)g|MP?(E)G|wma|avi|AVI|asf|vob|VOB|bin|dat|divx|DIVX|vcd|ps|pes|fli|flv|FLV|fxm|FXM|viv|rm|ram|yuv|mov|MOV|qt|QT|wmv|mp[234]|MP[234]|m4[pv]|M4[PV]|mkv|MKV|og[agmvx]|OG[AGMVX]|t[ps]|T[PS]|m2t?(s)|M2T?(S)|wav|WAV|flac|FLAC|asx|ASX|mng|MNG|srt|m[eo]d|M[EO]D|s[3t]m|S[3T]M|it|IT|xm|XM)|+([0-9]).@(vdr|VDR))?(.part)' xine aaxine fbxine
complete -f -X '!*@(.@(mp?(e)g|MP?(E)G|wma|avi|AVI|asf|vob|VOB|bin|dat|divx|DIVX|vcd|ps|pes|fli|flv|FLV|fxm|FXM|viv|rm|ram|yuv|mov|MOV|qt|QT|wmv|mp[234]|MP[234]|m4[pv]|M4[PV]|mkv|MKV|og[agmvx]|OG[AGMVX]|t[ps]|T[PS]|m2t?(s)|M2T?(S)|wav|WAV|flac|FLAC|asx|ASX|mng|MNG|srt|m[eo]d|M[EO]D|s[3t]m|S[3T]M|it|IT|xm|XM|iso|ISO)|+([0-9]).@(vdr|VDR))?(.part)' kaffeine dragon
complete -f -X '!*.@(avi|asf|wmv)' aviplay
complete -f -X '!*.@(rm?(j)|ra?(m)|smi?(l))' realplay
complete -f -X '!*.@(mpg|mpeg|avi|mov|qt)' xanim
complete -f -X '!*.@(og[ag]|m3u|flac|spx)' ogg123
complete -f -X '!*.@(mp3|og[ag]|pls|m3u)' gqmpeg freeamp
complete -f -X '!*.fig' xfig
complete -f -X '!*.@(mid?(i)|cmf)' playmidi
complete -f -X '!*.@(mid?(i)|rmi|rcp|[gr]36|g18|mod|xm|it|x3m|s[3t]m|kar)' timidity
complete -f -X '!*.@(m[eo]d|s[3t]m|xm|it)' modplugplay modplug123
complete -f -X '*.@(o|so|so.!(conf)|a|[rs]pm|gif|jp?(e)g|mp3|mp?(e)g|avi|asf|ogg|class)' vi vim gvim rvim view rview rgvim rgview gview emacs xemacs sxemacs kate kwrite
complete -f -X '!*.@([eE][xX][eE]?(.[sS][oO])|[cC][oO][mM]|[sS][cC][rR])' wine
complete -f -X '!*.@(zip|z|gz|tgz)' bzme
# konqueror not here on purpose, it's more than a web/html browser
complete -f -X '!*.@(?([xX]|[sS])[hH][tT][mM]?([lL]))' netscape mozilla lynx opera galeon dillo elinks amaya firefox mozilla-firefox iceweasel google-chrome chromium-browser epiphany
complete -f -X '!*.@(sxw|stw|sxg|sgl|doc?([mx])|dot?([mx])|rtf|txt|htm|html|odt|ott|odm)' oowriter
complete -f -X '!*.@(sxi|sti|pps?(x)|ppt?([mx])|pot?([mx])|odp|otp)' ooimpress
complete -f -X '!*.@(sxc|stc|xls?([bmx])|xlw|xlt?([mx])|[ct]sv|ods|ots)' oocalc
complete -f -X '!*.@(sxd|std|sda|sdd|odg|otg)' oodraw
complete -f -X '!*.@(sxm|smf|mml|odf)' oomath
complete -f -X '!*.odb' oobase
complete -f -X '!*.[rs]pm' rpm2cpio
complete -f -X '!*.aux' bibtex
complete -f -X '!*.po' poedit gtranslator kbabel lokalize
complete -f -X '!*.@([Pp][Rr][Gg]|[Cc][Ll][Pp])' harbour gharbour hbpp
complete -f -X '!*.[Hh][Rr][Bb]' hbrun
complete -f -X '!*.ly' lilypond ly2dvi
complete -f -X '!*.@(dif?(f)|?(d)patch)?(.@([gx]z|bz2|lzma))' cdiff
complete -f -X '!*.lyx' lyx
complete -f -X '!@(*.@(ks|jks|jceks|p12|pfx|bks|ubr|gkr|cer|crt|cert|p7b|pkipath|pem|p10|csr|crl)|cacerts)' portecle
complete -f -X '!*.@(mp[234c]|og[ag]|@(fl|a)ac|m4[abp]|spx|tta|w?(a)v|wma|aif?(f)|asf|ape)' kid3 kid3-qt
# FINISH exclude -- do not remove this line
# start of section containing compspecs that can be handled within bash
# user commands see only users
complete -u su write chfn groups slay w sux runuser
# bg completes with stopped jobs
complete -A stopped -P '"%' -S '"' bg
# other job commands
complete -j -P '"%' -S '"' fg jobs disown
# readonly and unset complete with shell variables
complete -v readonly unset
# set completes with set options
complete -A setopt set
# shopt completes with shopt options
complete -A shopt shopt
# helptopics
complete -A helptopic help
# unalias completes with aliases
complete -a unalias
# bind completes with readline bindings (make this more intelligent)
complete -A binding bind
# type and which complete on commands
complete -c command type which
# builtin completes on builtins
complete -b builtin
# start of section containing completion functions called by other functions
# This function checks whether we have a given program on the system.
# No need for bulky functions in memory if we don't.
#
have()
{
unset -v have
# Completions for system administrator commands are installed as well in
# case completion is attempted via `sudo command ...'.
PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin type $1 &>/dev/null &&
have="yes"
}
# This function checks whether a given readline variable
# is `on'.
#
_rl_enabled()
{
[[ "$( bind -v )" = *$1+([[:space:]])on* ]]
}
# This function shell-quotes the argument
quote()
{
echo \'${1//\'/\'\\\'\'}\' #'# Help vim syntax highlighting
}
# @see _quote_readline_by_ref()
quote_readline()
{
local quoted
_quote_readline_by_ref "$1" ret
printf %s "$ret"
} # quote_readline()
# This function shell-dequotes the argument
dequote()
{
eval echo "$1" 2> /dev/null
}
# Assign variable one scope above the caller
# Usage: local "$1" && _upvar $1 "value(s)"
# Param: $1 Variable name to assign value to
# Param: $* Value(s) to assign. If multiple values, an array is
# assigned, otherwise a single value is assigned.
# NOTE: For assigning multiple variables, use '_upvars'. Do NOT
# use multiple '_upvar' calls, since one '_upvar' call might
# reassign a variable to be used by another '_upvar' call.
# See: http://fvue.nl/wiki/Bash:_Passing_variables_by_reference
_upvar() {
if unset -v "$1"; then # Unset & validate varname
if (( $# == 2 )); then
eval $1=\"\$2\" # Return single value
else
eval $1=\(\"\${@:2}\"\) # Return array
fi
fi
}
# Assign variables one scope above the caller
# Usage: local varname [varname ...] &&
# _upvars [-v varname value] | [-aN varname [value ...]] ...
# Available OPTIONS:
# -aN Assign next N values to varname as array
# -v Assign single value to varname
# Return: 1 if error occurs
# See: http://fvue.nl/wiki/Bash:_Passing_variables_by_reference
_upvars() {
if ! (( $# )); then
echo "${FUNCNAME[0]}: usage: ${FUNCNAME[0]} [-v varname"\
"value] | [-aN varname [value ...]] ..." 1>&2
return 2
fi
while (( $# )); do
case $1 in
-a*)
# Error checking
[[ ${1#-a} ]] || { echo "bash: ${FUNCNAME[0]}: \`$1': missing"\
"number specifier" 1>&2; return 1; }
printf %d "${1#-a}" &> /dev/null || { echo "bash:"\
"${FUNCNAME[0]}: \`$1': invalid number specifier" 1>&2
return 1; }
# Assign array of -aN elements
[[ "$2" ]] && unset -v "$2" && eval $2=\(\"\${@:3:${1#-a}}\"\) &&
shift $((${1#-a} + 2)) || { echo "bash: ${FUNCNAME[0]}:"\
"\`$1${2+ }$2': missing argument(s)" 1>&2; return 1; }
;;
-v)
# Assign single value
[[ "$2" ]] && unset -v "$2" && eval $2=\"\$3\" &&
shift 3 || { echo "bash: ${FUNCNAME[0]}: $1: missing"\
"argument(s)" 1>&2; return 1; }
;;
*)
echo "bash: ${FUNCNAME[0]}: $1: invalid option" 1>&2
return 1 ;;
esac
done
}
# Reassemble command line words, excluding specified characters from the
# list of word completion separators (COMP_WORDBREAKS).
# @param $1 chars Characters out of $COMP_WORDBREAKS which should
# NOT be considered word breaks. This is useful for things like scp where
# we want to return host:path and not only path, so we would pass the
# colon (:) as $1 here.
# @param $2 words Name of variable to return words to
# @param $3 cword Name of variable to return cword to
#
__reassemble_comp_words_by_ref() {
local exclude i j ref
# Exclude word separator characters?
if [[ $1 ]]; then
# Yes, exclude word separator characters;
# Exclude only those characters, which were really included
exclude="${1//[^$COMP_WORDBREAKS]}"
fi
# Default to cword unchanged
eval $3=$COMP_CWORD
# Are characters excluded which were former included?
if [[ $exclude ]]; then
# Yes, list of word completion separators has shrunk;
# Re-assemble words to complete
for (( i=0, j=0; i < ${#COMP_WORDS[@]}; i++, j++)); do
# Is current word not word 0 (the command itself) and is word not
# empty and is word made up of just word separator characters to be
# excluded?
while [[ $i -gt 0 && ${COMP_WORDS[$i]} &&
${COMP_WORDS[$i]//[^$exclude]} == ${COMP_WORDS[$i]}
]]; do
[ $j -ge 2 ] && ((j--))
# Append word separator to current word
ref="$2[$j]"
eval $2[$j]=\${!ref}\${COMP_WORDS[i]}
# Indicate new cword
[ $i = $COMP_CWORD ] && eval $3=$j
# Indicate next word if available, else end *both* while and for loop
(( $i < ${#COMP_WORDS[@]} - 1)) && ((i++)) || break 2
done
# Append word to current word
ref="$2[$j]"
eval $2[$j]=\${!ref}\${COMP_WORDS[i]}
# Indicate new cword
[[ $i == $COMP_CWORD ]] && eval $3=$j
done
else
# No, list of word completions separators hasn't changed;
eval $2=\( \"\${COMP_WORDS[@]}\" \)
fi
} # __reassemble_comp_words_by_ref()
# @param $1 exclude Characters out of $COMP_WORDBREAKS which should NOT be
# considered word breaks. This is useful for things like scp where
# we want to return host:path and not only path, so we would pass the
# colon (:) as $1 in this case. Bash-3 doesn't do word splitting, so this
# ensures we get the same word on both bash-3 and bash-4.
# @param $2 words Name of variable to return words to
# @param $3 cword Name of variable to return cword to
# @param $4 cur Name of variable to return current word to complete to
# @see ___get_cword_at_cursor_by_ref()
__get_cword_at_cursor_by_ref() {
local cword words=()
__reassemble_comp_words_by_ref "$1" words cword
local i cur2
local cur="$COMP_LINE"
local index="$COMP_POINT"
for (( i = 0; i <= cword; ++i )); do
while [[
# Current word fits in $cur?
"${#cur}" -ge ${#words[i]} &&
# $cur doesn't match cword?
"${cur:0:${#words[i]}}" != "${words[i]}"
]]; do
# Strip first character
cur="${cur:1}"
# Decrease cursor position
((index--))
done
# Does found word matches cword?
if [[ "$i" -lt "$cword" ]]; then
# No, cword lies further;
local old_size="${#cur}"
cur="${cur#${words[i]}}"
local new_size="${#cur}"
index=$(( index - old_size + new_size ))
fi
done
if [[ "${words[cword]:0:${#cur}}" != "$cur" ]]; then
# We messed up. At least return the whole word so things keep working
cur2=${words[cword]}
else
cur2=${cur:0:$index}
fi
local "$2" "$3" "$4" &&
_upvars -a${#words[@]} $2 "${words[@]}" -v $3 "$cword" -v $4 "$cur2"
}
# Get the word to complete and optional previous words.
# This is nicer than ${COMP_WORDS[$COMP_CWORD]}, since it handles cases
# where the user is completing in the middle of a word.
# (For example, if the line is "ls foobar",
# and the cursor is here --------> ^
# Also one is able to cross over possible wordbreak characters.
# Usage: _get_comp_words_by_ref [OPTIONS] [VARNAMES]
# Available VARNAMES:
# cur Return cur via $cur
# prev Return prev via $prev
# words Return words via $words
# cword Return cword via $cword
#
# Available OPTIONS:
# -n EXCLUDE Characters out of $COMP_WORDBREAKS which should NOT be
# considered word breaks. This is useful for things like scp
# where we want to return host:path and not only path, so we
# would pass the colon (:) as -n option in this case. Bash-3
# doesn't do word splitting, so this ensures we get the same
# word on both bash-3 and bash-4.
# -c VARNAME Return cur via $VARNAME
# -p VARNAME Return prev via $VARNAME
# -w VARNAME Return words via $VARNAME
# -i VARNAME Return cword via $VARNAME
#
# Example usage:
#
# $ _get_comp_words_by_ref -n : cur prev
#
_get_comp_words_by_ref()
{
local exclude flag i OPTIND=1
local cur cword words=()
local upargs=() upvars=() vcur vcword vprev vwords
while getopts "c:i:n:p:w:" flag "$@"; do
case $flag in
c) vcur=$OPTARG ;;
i) vcword=$OPTARG ;;
n) exclude=$OPTARG ;;
p) vprev=$OPTARG ;;
w) vwords=$OPTARG ;;
esac
done
while [[ $# -ge $OPTIND ]]; do
case ${!OPTIND} in
cur) vcur=cur ;;
prev) vprev=prev ;;
cword) vcword=cword ;;
words) vwords=words ;;
*) echo "bash: $FUNCNAME(): \`${!OPTIND}': unknown argument" \
1>&2; return 1
esac
let "OPTIND += 1"
done
__get_cword_at_cursor_by_ref "$exclude" words cword cur
[[ $vcur ]] && { upvars+=("$vcur" ); upargs+=(-v $vcur "$cur" ); }
[[ $vcword ]] && { upvars+=("$vcword"); upargs+=(-v $vcword "$cword"); }
[[ $vprev ]] && { upvars+=("$vprev" ); upargs+=(-v $vprev
"${words[cword - 1]}"); }
[[ $vwords ]] && { upvars+=("$vwords"); upargs+=(-a${#words[@]} $vwords
"${words[@]}"); }
(( ${#upvars[@]} )) && local "${upvars[@]}" && _upvars "${upargs[@]}"
}
# Get the word to complete.
# This is nicer than ${COMP_WORDS[$COMP_CWORD]}, since it handles cases
# where the user is completing in the middle of a word.
# (For example, if the line is "ls foobar",
# and the cursor is here --------> ^
# @param $1 string Characters out of $COMP_WORDBREAKS which should NOT be
# considered word breaks. This is useful for things like scp where
# we want to return host:path and not only path, so we would pass the
# colon (:) as $1 in this case. Bash-3 doesn't do word splitting, so this
# ensures we get the same word on both bash-3 and bash-4.
# @param $2 integer Index number of word to return, negatively offset to the
# current word (default is 0, previous is 1), respecting the exclusions
# given at $1. For example, `_get_cword "=:" 1' returns the word left of
# the current word, respecting the exclusions "=:".
# @deprecated Use `_get_comp_words_by_ref cur' instead
# @see _get_comp_words_by_ref()
_get_cword()
{
local LC_CTYPE=C
local cword words
__reassemble_comp_words_by_ref "$1" words cword
# return previous word offset by $2
if [[ ${2//[^0-9]/} ]]; then
printf "%s" "${words[cword-$2]}"
elif [[ "${#words[cword]}" -eq 0 || "$COMP_POINT" == "${#COMP_LINE}" ]]; then
printf "%s" "${words[cword]}"
else
local i
local cur="$COMP_LINE"
local index="$COMP_POINT"
for (( i = 0; i <= cword; ++i )); do
while [[
# Current word fits in $cur?
"${#cur}" -ge ${#words[i]} &&
# $cur doesn't match cword?
"${cur:0:${#words[i]}}" != "${words[i]}"
]]; do
# Strip first character
cur="${cur:1}"
# Decrease cursor position
((index--))
done
# Does found word matches cword?
if [[ "$i" -lt "$cword" ]]; then
# No, cword lies further;
local old_size="${#cur}"
cur="${cur#${words[i]}}"
local new_size="${#cur}"
index=$(( index - old_size + new_size ))
fi
done
if [[ "${words[cword]:0:${#cur}}" != "$cur" ]]; then
# We messed up! At least return the whole word so things
# keep working
printf "%s" "${words[cword]}"
else
printf "%s" "${cur:0:$index}"
fi
fi
} # _get_cword()
# Get word previous to the current word.
# This is a good alternative to `prev=${COMP_WORDS[COMP_CWORD-1]}' because bash4
# will properly return the previous word with respect to any given exclusions to
# COMP_WORDBREAKS.
# @deprecated Use `_get_comp_words_by_ref cur prev' instead
# @see _get_comp_words_by_ref()
#
_get_pword()
{
if [ $COMP_CWORD -ge 1 ]; then
_get_cword "${@:-}" 1;
fi
}
# If the word-to-complete contains a colon (:), left-trim COMPREPLY items with
# word-to-complete.
# On bash-3, and bash-4 with a colon in COMP_WORDBREAKS, words containing
# colons are always completed as entire words if the word to complete contains
# a colon. This function fixes this, by removing the colon-containing-prefix
# from COMPREPLY items.
# The preferred solution is to remove the colon (:) from COMP_WORDBREAKS in
# your .bashrc:
#
# # Remove colon (:) from list of word completion separators
# COMP_WORDBREAKS=${COMP_WORDBREAKS//:}
#
# See also: Bash FAQ - E13) Why does filename completion misbehave if a colon
# appears in the filename? - http://tiswww.case.edu/php/chet/bash/FAQ
# @param $1 current word to complete (cur)
# @modifies global array $COMPREPLY
#
__ltrim_colon_completions() {
# If word-to-complete contains a colon,
# and bash-version < 4,
# or bash-version >= 4 and COMP_WORDBREAKS contains a colon
if [[
"$1" == *:* && (
${BASH_VERSINFO[0]} -lt 4 ||
(${BASH_VERSINFO[0]} -ge 4 && "$COMP_WORDBREAKS" == *:*)
)
]]; then
# Remove colon-word prefix from COMPREPLY items
local colon_word=${1%${1##*:}}
local i=${#COMPREPLY[*]}
while [ $((--i)) -ge 0 ]; do
COMPREPLY[$i]=${COMPREPLY[$i]#"$colon_word"}
done
fi
} # __ltrim_colon_completions()
# This function quotes the argument in a way so that readline dequoting
# results in the original argument. This is necessary for at least
# `compgen' which requires its arguments quoted/escaped:
#
# $ ls "a'b/"
# c
# $ compgen -f "a'b/" # Wrong, doesn't return output
# $ compgen -f "a\'b/" # Good (bash-4)
# a\'b/c
# $ compgen -f "a\\\\\'b/" # Good (bash-3)
# a\'b/c
#
# On bash-3, special characters need to be escaped extra. This is
# unless the first character is a single quote ('). If the single
# quote appears further down the string, bash default completion also
# fails, e.g.:
#
# $ ls 'a&b/'
# f
# $ foo 'a&b/<TAB> # Becomes: foo 'a&b/f'
# $ foo a'&b/<TAB> # Nothing happens
#
# See also:
# - http://lists.gnu.org/archive/html/bug-bash/2009-03/msg00155.html
# - http://www.mail-archive.com/bash-completion-devel@lists.alioth.\
# debian.org/msg01944.html
# @param $1 Argument to quote
# @param $2 Name of variable to return result to
_quote_readline_by_ref()
{
if [[ ${1:0:1} == "'" ]]; then
if [[ ${BASH_VERSINFO[0]} -ge 4 ]]; then
# Leave out first character
printf -v $2 %s "${1:1}"
else
# Quote word, leaving out first character
printf -v $2 %q "${1:1}"
# Double-quote word (bash-3)
printf -v $2 %q ${!2}
fi
elif [[ ${BASH_VERSINFO[0]} -le 3 && ${1:0:1} == '"' ]]; then
printf -v $2 %q "${1:1}"
else
printf -v $2 %q "$1"
fi
# If result becomes quoted like this: $'string', re-evaluate in order to
# drop the additional quoting. See also: http://www.mail-archive.com/
# bash-completion-devel@lists.alioth.debian.org/msg01942.html
[[ ${!2:0:1} == '$' ]] && eval $2=${!2}
} # _quote_readline_by_ref()
# This function turns on "-o filenames" behavior dynamically. It is present
# for bash < 4 reasons. See http://bugs.debian.org/272660#64 for info about
# the bash < 4 compgen hack.
_compopt_o_filenames()
{
# We test for compopt availability first because directly invoking it on
# bash < 4 at this point may cause terminal echo to be turned off for some
# reason, see https://bugzilla.redhat.com/653669 for more info.
type compopt &>/dev/null && compopt -o filenames 2>/dev/null || \
compgen -f /non-existing-dir/ >/dev/null
}
# This function performs file and directory completion. It's better than
# simply using 'compgen -f', because it honours spaces in filenames.
# @param $1 If `-d', complete only on directories. Otherwise filter/pick only
# completions with `.$1' and the uppercase version of it as file
# extension.
#
_filedir()
{
local i IFS=$'\n' xspec
_tilde "$cur" || return 0
local -a toks
local quoted tmp
_quote_readline_by_ref "$cur" quoted
toks=( ${toks[@]-} $(
compgen -d -- "$quoted" | {
while read -r tmp; do
# TODO: I have removed a "[ -n $tmp ] &&" before 'printf ..',
# and everything works again. If this bug suddenly
# appears again (i.e. "cd /b<TAB>" becomes "cd /"),
# remember to check for other similar conditionals (here
# and _filedir_xspec()). --David
printf '%s\n' $tmp
done
}
))
if [[ "$1" != -d ]]; then
# Munge xspec to contain uppercase version too
[[ ${BASH_VERSINFO[0]} -ge 4 ]] && \
xspec=${1:+"!*.@($1|${1^^})"} || \
xspec=${1:+"!*.@($1|$(printf %s $1 | tr '[:lower:]' '[:upper:]'))"}
toks=( ${toks[@]-} $( compgen -f -X "$xspec" -- $quoted) )
fi
[ ${#toks[@]} -ne 0 ] && _compopt_o_filenames
# If the filter failed to produce anything, try w/o it (LP: #533985)
if [[ -n "$1" ]] && [[ "$1" != -d ]] && [[ ${#toks[@]} -lt 1 ]] ; then
toks=( ${toks[@]-} $( compgen -f -X -- $quoted) )
fi
COMPREPLY=( "${COMPREPLY[@]}" "${toks[@]}" )
} # _filedir()
# This function splits $cur=--foo=bar into $prev=--foo, $cur=bar, making it
# easier to support both "--foo bar" and "--foo=bar" style completions.
# Returns 0 if current option was split, 1 otherwise.
#
_split_longopt()
{
if [[ "$cur" == --?*=* ]]; then
# Cut also backslash before '=' in case it ended up there
# for some reason.
prev="${cur%%?(\\)=*}"
cur="${cur#*=}"
return 0
fi
return 1
}
# This function tries to parse the help output of the given command.
# @param $1 command
# @param $2 command options (default: --help)
#
_parse_help() {
$1 ${2:---help} 2>&1 | sed -e '/^[[:space:]]*-/!d' -e 's|[,/]| |g' | \
awk '{ print $1; if ($2 ~ /^-/) { print $2 } }' | sed -e 's|[<=].*||'
}
# This function completes on signal names
#
_signals()
{
local i
# standard signal completion is rather braindead, so we need
# to hack around to get what we want here, which is to
# complete on a dash, followed by the signal name minus
# the SIG prefix
COMPREPLY=( $( compgen -A signal SIG${cur#-} ))
for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
COMPREPLY[i]=-${COMPREPLY[i]#SIG}
done
}
# This function completes on known mac addresses
#
_mac_addresses()
{
local re='\([A-Fa-f0-9]\{2\}:\)\{5\}[A-Fa-f0-9]\{2\}'
local PATH="$PATH:/sbin:/usr/sbin"
# Local interfaces (Linux only?)
COMPREPLY=( "${COMPREPLY[@]}" $( ifconfig -a 2>/dev/null | sed -ne \
"s/.*[[:space:]]HWaddr[[:space:]]\{1,\}\($re\)[[:space:]]*$/\1/p" ) )
# ARP cache
COMPREPLY=( "${COMPREPLY[@]}" $( arp -an 2>/dev/null | sed -ne \
"s/.*[[:space:]]\($re\)[[:space:]].*/\1/p" -ne \
"s/.*[[:space:]]\($re\)[[:space:]]*$/\1/p" ) )
# /etc/ethers
COMPREPLY=( "${COMPREPLY[@]}" $( sed -ne \
"s/^[[:space:]]*\($re\)[[:space:]].*/\1/p" /etc/ethers 2>/dev/null ) )
COMPREPLY=( $( compgen -W '${COMPREPLY[@]}' -- "$cur" ) )
__ltrim_colon_completions "$cur"
}
# This function completes on configured network interfaces
#
_configured_interfaces()
{
if [ -f /etc/debian_version ]; then
# Debian system
COMPREPLY=( $( compgen -W "$( sed -ne 's|^iface \([^ ]\{1,\}\).*$|\1|p'\
/etc/network/interfaces )" -- "$cur" ) )
elif [ -f /etc/SuSE-release ]; then
# SuSE system
COMPREPLY=( $( compgen -W "$( printf '%s\n' \
/etc/sysconfig/network/ifcfg-* | \
sed -ne 's|.*ifcfg-\(.*\)|\1|p' )" -- "$cur" ) )
elif [ -f /etc/pld-release ]; then
# PLD Linux
COMPREPLY=( $( compgen -W "$( command ls -B \
/etc/sysconfig/interfaces | \
sed -ne 's|.*ifcfg-\(.*\)|\1|p' )" -- "$cur" ) )
else
# Assume Red Hat
COMPREPLY=( $( compgen -W "$( printf '%s\n' \
/etc/sysconfig/network-scripts/ifcfg-* | \
sed -ne 's|.*ifcfg-\(.*\)|\1|p' )" -- "$cur" ) )
fi
}
# This function completes on available kernels
#
_kernel_versions()
{
COMPREPLY=( $( compgen -W '$( command ls /lib/modules )' -- "$cur" ) )
}
# This function completes on all available network interfaces
# -a: restrict to active interfaces only
# -w: restrict to wireless interfaces only
#
_available_interfaces()
{
local cmd
if [ "${1:-}" = -w ]; then
cmd="iwconfig"
elif [ "${1:-}" = -a ]; then
cmd="ifconfig"
else
cmd="ifconfig -a"
fi
COMPREPLY=( $( eval PATH="$PATH:/sbin" $cmd 2>/dev/null | \
awk '/^[^ \t]/ { print $1 }' ) )
COMPREPLY=( $( compgen -W '${COMPREPLY[@]/%[[:punct:]]/}' -- "$cur" ) )
}
# Perform tilde (~) completion
# @return True (0) if completion needs further processing,
# False (> 0) if tilde is followed by a valid username, completions
# are put in COMPREPLY and no further processing is necessary.
_tilde() {
local result=0
# Does $1 start with tilde (~) and doesn't contain slash (/)?
if [[ ${1:0:1} == "~" && $1 == ${1//\/} ]]; then
_compopt_o_filenames
# Try generate username completions
COMPREPLY=( $( compgen -P '~' -u "${1#\~}" ) )
result=${#COMPREPLY[@]}
fi
return $result
}
# Expand variable starting with tilde (~)
# We want to expand ~foo/... to /home/foo/... to avoid problems when
# word-to-complete starting with a tilde is fed to commands and ending up
# quoted instead of expanded.
# Only the first portion of the variable from the tilde up to the first slash
# (~../) is expanded. The remainder of the variable, containing for example
# a dollar sign variable ($) or asterisk (*) is not expanded.
# Example usage:
#
# $ v="~"; __expand_tilde_by_ref v; echo "$v"
#
# Example output:
#
# v output
# -------- ----------------
# ~ /home/user
# ~foo/bar /home/foo/bar
# ~foo/$HOME /home/foo/$HOME
# ~foo/a b /home/foo/a b
# ~foo/* /home/foo/*
#
# @param $1 Name of variable (not the value of the variable) to expand
__expand_tilde_by_ref() {
# Does $1 start with tilde (~)?
if [ "${!1:0:1}" = "~" ]; then
# Does $1 contain slash (/)?
if [ "${!1}" != "${!1//\/}" ]; then
# Yes, $1 contains slash;
# 1: Remove * including and after first slash (/), i.e. "~a/b"
# becomes "~a". Double quotes allow eval.
# 2: Remove * before the first slash (/), i.e. "~a/b"
# becomes "b". Single quotes prevent eval.
# +-----1----+ +---2----+
eval $1="${!1/%\/*}"/'${!1#*/}'
else
# No, $1 doesn't contain slash
eval $1="${!1}"
fi
fi
} # __expand_tilde_by_ref()
# This function expands tildes in pathnames
#
_expand()
{
# FIXME: Why was this here?
#[ "$cur" != "${cur%\\}" ] && cur="$cur\\"
# Expand ~username type directory specifications. We want to expand
# ~foo/... to /home/foo/... to avoid problems when $cur starting with
# a tilde is fed to commands and ending up quoted instead of expanded.
if [[ "$cur" == \~*/* ]]; then
eval cur=$cur
elif [[ "$cur" == \~* ]]; then
cur=${cur#\~}
COMPREPLY=( $( compgen -P '~' -u "$cur" ) )
[ ${#COMPREPLY[@]} -eq 1 ] && eval COMPREPLY[0]=${COMPREPLY[0]}
return ${#COMPREPLY[@]}
fi
}
# This function completes on process IDs.
# AIX and Solaris ps prefers X/Open syntax.
[[ $UNAME == SunOS || $UNAME == AIX ]] &&
_pids()
{
COMPREPLY=( $( compgen -W '$( command ps -efo pid | sed 1d )' -- "$cur" ))
} ||
_pids()
{
COMPREPLY=( $( compgen -W '$( command ps axo pid= )' -- "$cur" ) )
}
# This function completes on process group IDs.
# AIX and SunOS prefer X/Open, all else should be BSD.
[[ $UNAME == SunOS || $UNAME == AIX ]] &&
_pgids()
{
COMPREPLY=( $( compgen -W '$( command ps -efo pgid | sed 1d )' -- "$cur" ))
} ||
_pgids()
{
COMPREPLY=( $( compgen -W '$( command ps axo pgid= )' -- "$cur" ))
}
# This function completes on process names.
# AIX and SunOS prefer X/Open, all else should be BSD.
[[ $UNAME == SunOS || $UNAME == AIX ]] &&
_pnames()
{
COMPREPLY=( $( compgen -X '<defunct>' -W '$( command ps -efo comm | \
sed -e 1d -e "s:.*/::" -e "s/^-//" | sort -u )' -- "$cur" ) )
} ||
_pnames()
{
# FIXME: completes "[kblockd/0]" to "0". Previously it was completed
# to "kblockd" which isn't correct either. "kblockd/0" would be
# arguably most correct, but killall from psmisc 22 treats arguments
# containing "/" specially unless -r is given so that wouldn't quite
# work either. Perhaps it'd be best to not complete these to anything
# for now.
# Not using "ps axo comm" because under some Linux kernels, it
# truncates command names (see e.g. http://bugs.debian.org/497540#19)
COMPREPLY=( $( compgen -X '<defunct>' -W '$( command ps axo command= | \
sed -e "s/ .*//" -e "s:.*/::" -e "s/:$//" -e "s/^[[(-]//" \
-e "s/[])]$//" | sort -u )' -- "$cur" ) )
}
# This function completes on user IDs
#
_uids()
{
if type getent &>/dev/null; then
COMPREPLY=( $( compgen -W '$( getent passwd | cut -d: -f3 )' -- "$cur" ) )
elif type perl &>/dev/null; then
COMPREPLY=( $( compgen -W '$( perl -e '"'"'while (($uid) = (getpwent)[2]) { print $uid . "\n" }'"'"' )' -- "$cur" ) )
else
# make do with /etc/passwd
COMPREPLY=( $( compgen -W '$( cut -d: -f3 /etc/passwd )' -- "$cur" ) )
fi
}
# This function completes on group IDs
#
_gids()
{
if type getent &>/dev/null; then
COMPREPLY=( $( compgen -W '$( getent group | cut -d: -f3 )' \
-- "$cur" ) )
elif type perl &>/dev/null; then
COMPREPLY=( $( compgen -W '$( perl -e '"'"'while (($gid) = (getgrent)[2]) { print $gid . "\n" }'"'"' )' -- "$cur" ) )
else
# make do with /etc/group
COMPREPLY=( $( compgen -W '$( cut -d: -f3 /etc/group )' -- "$cur" ) )
fi
}
# This function completes on services
#
_services()
{
local sysvdir famdir
[ -d /etc/rc.d/init.d ] && sysvdir=/etc/rc.d/init.d || sysvdir=/etc/init.d
famdir=/etc/xinetd.d
COMPREPLY=( $( printf '%s\n' \
$sysvdir/!(*.rpm@(orig|new|save)|*~|functions) ) )
if [ -d $famdir ]; then
COMPREPLY=( "${COMPREPLY[@]}" $( printf '%s\n' \
$famdir/!(*.rpm@(orig|new|save)|*~) ) )
fi
COMPREPLY=( $( compgen -W '${COMPREPLY[@]#@($sysvdir|$famdir)/}' -- "$cur" ) )
}
# This function completes on modules
#
_modules()
{
local modpath
modpath=/lib/modules/$1
COMPREPLY=( $( compgen -W "$( command ls -R $modpath | \
sed -ne 's/^\(.*\)\.k\{0,1\}o\(\.gz\)\{0,1\}$/\1/p' )" -- "$cur" ) )
}
# This function completes on installed modules
#
_installed_modules()
{
COMPREPLY=( $( compgen -W "$( PATH="$PATH:/sbin" lsmod | \
awk '{if (NR != 1) print $1}' )" -- "$1" ) )
}
# This function completes on user or user:group format; as for chown and cpio.
#
# The : must be added manually; it will only complete usernames initially.
# The legacy user.group format is not supported.
#
# @param $1 If -u, only return users/groups the user has access to in
# context of current completion.
_usergroup()
{
if [[ $cur = *\\\\* || $cur = *:*:* ]]; then
# Give up early on if something seems horribly wrong.
return
elif [[ $cur = *\\:* ]]; then
# Completing group after 'user\:gr<TAB>'.
# Reply with a list of groups prefixed with 'user:', readline will
# escape to the colon.
local prefix
prefix=${cur%%*([^:])}
prefix=${prefix//\\}
local mycur="${cur#*[:]}"
if [[ $1 == -u ]]; then
_allowed_groups "$mycur"
else
local IFS=$'\n'
COMPREPLY=( $( compgen -g -- "$mycur" ) )
fi
COMPREPLY=( $( compgen -P "$prefix" -W "${COMPREPLY[@]}" ) )
elif [[ $cur = *:* ]]; then
# Completing group after 'user:gr<TAB>'.
# Reply with a list of unprefixed groups since readline with split on :
# and only replace the 'gr' part
local mycur="${cur#*:}"
if [[ $1 == -u ]]; then
_allowed_groups "$mycur"
else
local IFS=$'\n'
COMPREPLY=( $( compgen -g -- "$mycur" ) )
fi
else
# Completing a partial 'usernam<TAB>'.
#
# Don't suffix with a : because readline will escape it and add a
# slash. It's better to complete into 'chown username ' than 'chown
# username\:'.
if [[ $1 == -u ]]; then
_allowed_users "$cur"
else
local IFS=$'\n'
COMPREPLY=( $( compgen -u -- "$cur" ) )
fi
fi
}
_allowed_users()
{
if _complete_as_root; then
local IFS=$'\n'
COMPREPLY=( $( compgen -u -- "${1:-$cur}" ) )
else
local IFS=$'\n '
COMPREPLY=( $( compgen -W \
"$( id -un 2>/dev/null || whoami 2>/dev/null )" -- "${1:-$cur}" ) )
fi
}
_allowed_groups()
{
if _complete_as_root; then
local IFS=$'\n'
COMPREPLY=( $( compgen -g -- "$1" ) )
else
local IFS=$'\n '
COMPREPLY=( $( compgen -W \
"$( id -Gn 2>/dev/null || groups 2>/dev/null )" -- "$1" ) )
fi
}
# This function completes on valid shells
#
_shells()
{
COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W \
'$( command grep "^[[:space:]]*/" /etc/shells 2>/dev/null )' \
-- "$cur" ) )
}
# This function completes on valid filesystem types
#
_fstypes()
{
local fss
if [ -e /proc/filesystems ] ; then
# Linux
fss="$( cut -d$'\t' -f2 /proc/filesystems )
$( awk '! /\*/ { print $NF }' /etc/filesystems 2>/dev/null )"
else
# Generic
fss="$( awk '/^[ \t]*[^#]/ { print $3 }' /etc/fstab 2>/dev/null )
$( awk '/^[ \t]*[^#]/ { print $3 }' /etc/mnttab 2>/dev/null )
$( awk '/^[ \t]*[^#]/ { print $4 }' /etc/vfstab 2>/dev/null )
$( awk '{ print $1 }' /etc/dfs/fstypes 2>/dev/null )
$( [ -d /etc/fs ] && command ls /etc/fs )"
fi
[ -n "$fss" ] && \
COMPREPLY=( "${COMPREPLY[@]}" $( compgen -W "$fss" -- "$cur" ) )
}
# Get real command.
# - arg: $1 Command
# - stdout: Filename of command in PATH with possible symbolic links resolved.
# Empty string if command not found.
# - return: True (0) if command found, False (> 0) if not.
_realcommand()
{
type -P "$1" > /dev/null && {
if type -p realpath > /dev/null; then
realpath "$(type -P "$1")"
elif type -p readlink > /dev/null; then
readlink -f "$(type -P "$1")"
else
type -P "$1"
fi
}
}
# This function returns the first arugment, excluding options
# @param $1 chars Characters out of $COMP_WORDBREAKS which should
# NOT be considered word breaks. See __reassemble_comp_words_by_ref.
_get_first_arg()
{
local i
arg=
for (( i=1; i < COMP_CWORD; i++ )); do
if [[ "${COMP_WORDS[i]}" != -* ]]; then
arg=${COMP_WORDS[i]}
break
fi
done
}
# This function counts the number of args, excluding options
# @param $1 chars Characters out of $COMP_WORDBREAKS which should
# NOT be considered word breaks. See __reassemble_comp_words_by_ref.
_count_args()
{
local i cword words
__reassemble_comp_words_by_ref "$1" words cword
args=1
for i in "${words[@]:1:cword-1}"; do
[[ "$i" != -* ]] && args=$(($args+1))
done
}
# This function completes on PCI IDs
#
_pci_ids()
{
COMPREPLY=( ${COMPREPLY[@]:-} $( compgen -W \
"$( PATH="$PATH:/sbin" lspci -n | awk '{print $3}')" -- "$cur" ) )
}
# This function completes on USB IDs
#
_usb_ids()
{
COMPREPLY=( ${COMPREPLY[@]:-} $( compgen -W \
"$( PATH="$PATH:/sbin" lsusb | awk '{print $6}' )" -- "$cur" ) )
}
# CD device names
_cd_devices()
{
COMPREPLY=( "${COMPREPLY[@]}"
$( compgen -f -d -X "!*/?([amrs])cd*" -- "${cur:-/dev/}" ) )
}
# DVD device names
_dvd_devices()
{
COMPREPLY=( "${COMPREPLY[@]}"
$( compgen -f -d -X "!*/?(r)dvd*" -- "${cur:-/dev/}" ) )
}
# start of section containing completion functions for external programs
# a little help for FreeBSD ports users
[ $UNAME = FreeBSD ] && complete -W 'index search fetch fetch-list extract \
patch configure build install reinstall deinstall clean clean-depends \
kernel buildworld' make
# This function provides simple user@host completion
#
_user_at_host() {
local cur
COMPREPLY=()
_get_comp_words_by_ref -n : cur
if [[ $cur == *@* ]]; then
_known_hosts_real "$cur"
else
COMPREPLY=( $( compgen -u -- "$cur" ) )
fi
return 0
}
shopt -u hostcomplete && complete -F _user_at_host -o nospace talk ytalk finger
# NOTE: Using this function as a helper function is deprecated. Use
# `_known_hosts_real' instead.
_known_hosts()
{
local options
COMPREPLY=()
# NOTE: Using `_known_hosts' as a helper function and passing options
# to `_known_hosts' is deprecated: Use `_known_hosts_real' instead.
[[ "$1" == -a || "$2" == -a ]] && options=-a
[[ "$1" == -c || "$2" == -c ]] && options="$options -c"
_known_hosts_real $options "$(_get_cword :)"
} # _known_hosts()
# Helper function for completing _known_hosts.
# This function performs host completion based on ssh's config and known_hosts
# files, as well as hostnames reported by avahi-browse if
# COMP_KNOWN_HOSTS_WITH_AVAHI is set to a non-empty value. Also hosts from
# HOSTFILE (compgen -A hostname) are added, unless
# COMP_KNOWN_HOSTS_WITH_HOSTFILE is set to an empty value.
# Usage: _known_hosts_real [OPTIONS] CWORD
# Options: -a Use aliases
# -c Use `:' suffix
# -F configfile Use `configfile' for configuration settings
# -p PREFIX Use PREFIX
# Return: Completions, starting with CWORD, are added to COMPREPLY[]
_known_hosts_real()
{
local configfile flag prefix
local cur curd awkcur user suffix aliases i host
local -a kh khd config
local OPTIND=1
while getopts "acF:p:" flag "$@"; do
case $flag in
a) aliases='yes' ;;
c) suffix=':' ;;
F) configfile=$OPTARG ;;
p) prefix=$OPTARG ;;
esac
done
[ $# -lt $OPTIND ] && echo "error: $FUNCNAME: missing mandatory argument CWORD"
cur=${!OPTIND}; let "OPTIND += 1"
[ $# -ge $OPTIND ] && echo "error: $FUNCNAME("$@"): unprocessed arguments:"\
$(while [ $# -ge $OPTIND ]; do printf '%s\n' ${!OPTIND}; shift; done)
[[ $cur == *@* ]] && user=${cur%@*}@ && cur=${cur#*@}
kh=()
# ssh config files
if [ -n "$configfile" ]; then
[ -r "$configfile" ] &&
config=( "${config[@]}" "$configfile" )
else
for i in /etc/ssh/ssh_config "${HOME}/.ssh/config" \
"${HOME}/.ssh2/config"; do
[ -r $i ] && config=( "${config[@]}" "$i" )
done
fi
# Known hosts files from configs
if [ ${#config[@]} -gt 0 ]; then
local OIFS=$IFS IFS=$'\n'
local -a tmpkh
# expand paths (if present) to global and user known hosts files
# TODO(?): try to make known hosts files with more than one consecutive
# spaces in their name work (watch out for ~ expansion
# breakage! Alioth#311595)
tmpkh=( $( awk 'sub("^[ \t]*([Gg][Ll][Oo][Bb][Aa][Ll]|[Uu][Ss][Ee][Rr])[Kk][Nn][Oo][Ww][Nn][Hh][Oo][Ss][Tt][Ss][Ff][Ii][Ll][Ee][ \t]+", "") { print $0 }' "${config[@]}" | sort -u ) )
for i in "${tmpkh[@]}"; do
# Remove possible quotes
i=${i//\"}
# Eval/expand possible `~' or `~user'
__expand_tilde_by_ref i
[ -r "$i" ] && kh=( "${kh[@]}" "$i" )
done
IFS=$OIFS
fi
if [ -z "$configfile" ]; then
# Global and user known_hosts files
for i in /etc/ssh/ssh_known_hosts /etc/ssh/ssh_known_hosts2 \
/etc/known_hosts /etc/known_hosts2 ~/.ssh/known_hosts \
~/.ssh/known_hosts2; do
[ -r $i ] && kh=( "${kh[@]}" $i )
done
for i in /etc/ssh2/knownhosts ~/.ssh2/hostkeys; do
[ -d $i ] && khd=( "${khd[@]}" $i/*pub )
done
fi
# If we have known_hosts files to use
if [[ ${#kh[@]} -gt 0 || ${#khd[@]} -gt 0 ]]; then
# Escape slashes and dots in paths for awk
awkcur=${cur//\//\\\/}
awkcur=${awkcur//\./\\\.}
curd=$awkcur
if [[ "$awkcur" == [0-9]*[.:]* ]]; then
# Digits followed by a dot or a colon - just search for that
awkcur="^$awkcur[.:]*"
elif [[ "$awkcur" == [0-9]* ]]; then
# Digits followed by no dot or colon - search for digits followed
# by a dot or a colon
awkcur="^$awkcur.*[.:]"
elif [ -z "$awkcur" ]; then
# A blank - search for a dot, a colon, or an alpha character
awkcur="[a-z.:]"
else
awkcur="^$awkcur"
fi
if [ ${#kh[@]} -gt 0 ]; then
# FS needs to look for a comma separated list
COMPREPLY=( "${COMPREPLY[@]}" $( awk 'BEGIN {FS=","}
/^\s*[^|\#]/ {for (i=1; i<=2; ++i) { \
sub(" .*$", "", $i); \
sub("^\\[", "", $i); sub("\\](:[0-9]+)?$", "", $i); \
if ($i ~ /'"$awkcur"'/) {print $i} \
}}' "${kh[@]}" 2>/dev/null ) )
fi
if [ ${#khd[@]} -gt 0 ]; then
# Needs to look for files called
# .../.ssh2/key_22_<hostname>.pub
# dont fork any processes, because in a cluster environment,
# there can be hundreds of hostkeys
for i in "${khd[@]}" ; do
if [[ "$i" == *key_22_$curd*.pub && -r "$i" ]]; then
host=${i/#*key_22_/}
host=${host/%.pub/}
COMPREPLY=( "${COMPREPLY[@]}" $host )
fi
done
fi
# apply suffix and prefix
for (( i=0; i < ${#COMPREPLY[@]}; i++ )); do
COMPREPLY[i]=$prefix$user${COMPREPLY[i]}$suffix
done
fi
# append any available aliases from config files
if [[ ${#config[@]} -gt 0 && -n "$aliases" ]]; then
local hosts=$( sed -ne 's/^[ \t]*[Hh][Oo][Ss][Tt]\([Nn][Aa][Mm][Ee]\)\{0,1\}['"$'\t '"']\{1,\}\([^#*?]*\)\(#.*\)\{0,1\}$/\2/p' "${config[@]}" )
COMPREPLY=( "${COMPREPLY[@]}" $( compgen -P "$prefix$user" \
-S "$suffix" -W "$hosts" -- "$cur" ) )
fi
# Add hosts reported by avahi-browse, if desired and it's available.
# This feature is disabled because it does not scale to
# larger networks. See:
# https://bugs.launchpad.net/ubuntu/+source/bash-completion/+bug/510591
#if [[ ${COMP_KNOWN_HOSTS_WITH_AVAHI:-} ]] && \
# type avahi-browse &>/dev/null; then
# The original call to avahi-browse also had "-k", to avoid lookups
# into avahi's services DB. We don't need the name of the service, and
# if it contains ";", it may mistify the result. But on Gentoo (at
# least), -k wasn't available (even if mentioned in the manpage) some
# time ago, so...
# COMPREPLY=( "${COMPREPLY[@]}" $( \
# compgen -P "$prefix$user" -S "$suffix" -W \
# "$( avahi-browse -cpr _workstation._tcp 2>/dev/null | \
# awk -F';' '/^=/ { print $7 }' | sort -u )" -- "$cur" ) )
#fi
# Add results of normal hostname completion, unless
# `COMP_KNOWN_HOSTS_WITH_HOSTFILE' is set to an empty value.
if [ -n "${COMP_KNOWN_HOSTS_WITH_HOSTFILE-1}" ]; then
COMPREPLY=( "${COMPREPLY[@]}"
$( compgen -A hostname -P "$prefix$user" -S "$suffix" -- "$cur" ) )
fi
__ltrim_colon_completions "$prefix$user$cur"
return 0
} # _known_hosts_real()
complete -F _known_hosts traceroute traceroute6 tracepath tracepath6 ping \
ping6 fping fping6 telnet host nslookup rsh rlogin ftp dig mtr \
ssh-installkeys showmount
# This meta-cd function observes the CDPATH variable, so that cd additionally
# completes on directories under those specified in CDPATH.
#
_cd()
{
local cur IFS=$'\n' i j k
_get_comp_words_by_ref cur
# try to allow variable completion
if [[ "$cur" == ?(\\)\$* ]]; then
COMPREPLY=( $( compgen -v -P '$' -- "${cur#?(\\)$}" ) )
return 0
fi
_compopt_o_filenames
# Use standard dir completion if no CDPATH or parameter starts with /,
# ./ or ../
if [[ -z "${CDPATH:-}" || "$cur" == ?(.)?(.)/* ]]; then
_filedir -d
return 0
fi
local -r mark_dirs=$(_rl_enabled mark-directories && echo y)
local -r mark_symdirs=$(_rl_enabled mark-symlinked-directories && echo y)
# we have a CDPATH, so loop on its contents
for i in ${CDPATH//:/$'\n'}; do
# create an array of matched subdirs
k="${#COMPREPLY[@]}"
for j in $( compgen -d $i/$cur ); do
if [[ ( $mark_symdirs && -h $j || $mark_dirs && ! -h $j ) && ! -d ${j#$i/} ]]; then
j="${j}/"
fi
COMPREPLY[k++]=${j#$i/}
done
done
_filedir -d
if [[ ${#COMPREPLY[@]} -eq 1 ]]; then
i=${COMPREPLY[0]}
if [[ "$i" == "$cur" && $i != "*/" ]]; then
COMPREPLY[0]="${i}/"
fi
fi
return 0
}
if shopt -q cdable_vars; then
complete -v -F _cd -o nospace cd
else
complete -F _cd -o nospace cd
fi
# a wrapper method for the next one, when the offset is unknown
_command()
{
local offset i
# find actual offset, as position of the first non-option
offset=1
for (( i=1; i <= COMP_CWORD; i++ )); do
if [[ "${COMP_WORDS[i]}" != -* ]]; then
offset=$i
break
fi
done
_command_offset $offset
}
# A meta-command completion function for commands like sudo(8), which need to
# first complete on a command, then complete according to that command's own
# completion definition - currently not quite foolproof (e.g. mount and umount
# don't work properly), but still quite useful.
#
_command_offset()
{
local cur func cline cspec noglob cmd i char_offset word_offset \
_COMMAND_FUNC _COMMAND_FUNC_ARGS
word_offset=$1
# rewrite current completion context before invoking
# actual command completion
# find new first word position, then
# rewrite COMP_LINE and adjust COMP_POINT
local first_word=${COMP_WORDS[$word_offset]}
for (( i=0; i <= ${#COMP_LINE}; i++ )); do
if [[ "${COMP_LINE:$i:${#first_word}}" == "$first_word" ]]; then
char_offset=$i
break
fi
done
COMP_LINE=${COMP_LINE:$char_offset}
COMP_POINT=$(( COMP_POINT - $char_offset ))
# shift COMP_WORDS elements and adjust COMP_CWORD
for (( i=0; i <= COMP_CWORD - $word_offset; i++ )); do
COMP_WORDS[i]=${COMP_WORDS[i+$word_offset]}
done
for (( i; i <= COMP_CWORD; i++ )); do
unset COMP_WORDS[i];
done
COMP_CWORD=$(( $COMP_CWORD - $word_offset ))
COMPREPLY=()
_get_comp_words_by_ref cur
if [[ $COMP_CWORD -eq 0 ]]; then
_compopt_o_filenames
COMPREPLY=( $( compgen -c -- "$cur" ) )
else
cmd=${COMP_WORDS[0]}
if complete -p ${cmd##*/} &>/dev/null; then
cspec=$( complete -p ${cmd##*/} )
if [ "${cspec#* -F }" != "$cspec" ]; then
# complete -F <function>
# get function name
func=${cspec#*-F }
func=${func%% *}
if [[ ${#COMP_WORDS[@]} -ge 2 ]]; then
$func $cmd "${COMP_WORDS[${#COMP_WORDS[@]}-1]}" "${COMP_WORDS[${#COMP_WORDS[@]}-2]}"
else
$func $cmd "${COMP_WORDS[${#COMP_WORDS[@]}-1]}"
fi
# remove any \: generated by a command that doesn't
# default to filenames or dirnames (e.g. sudo chown)
# FIXME: I'm pretty sure this does not work!
if [ "${cspec#*-o }" != "$cspec" ]; then
cspec=${cspec#*-o }
cspec=${cspec%% *}
if [[ "$cspec" != @(dir|file)names ]]; then
COMPREPLY=("${COMPREPLY[@]//\\\\:/:}")
else
_compopt_o_filenames
fi
fi
elif [ -n "$cspec" ]; then
cspec=${cspec#complete};
cspec=${cspec%%${cmd##*/}};
COMPREPLY=( $( eval compgen "$cspec" -- "$cur" ) );
fi
elif [ ${#COMPREPLY[@]} -eq 0 ]; then
_filedir
fi
fi
}
complete -F _command aoss command do else eval exec ltrace nice nohup padsp \
then time tsocks vsound xargs
_root_command()
{
local PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin
local root_command=$1
_command $1 $2 $3
}
complete -F _root_command fakeroot gksu gksudo kdesudo really sudo
# Return true if the completion should be treated as running as root
_complete_as_root()
{
[[ $EUID -eq 0 || ${root_command:-} ]]
}
_longopt()
{
local cur prev split=false
_get_comp_words_by_ref -n = cur prev
_split_longopt && split=true
case "$prev" in
--*[Dd][Ii][Rr]*)
_filedir -d
return 0
;;
--*[Ff][Ii][Ll][Ee]*|--*[Pp][Aa][Tt][Hh]*)
_filedir
return 0
;;
esac
$split && return 0
if [[ "$cur" == -* ]]; then
COMPREPLY=( $( compgen -W "$( $1 --help 2>&1 | \
sed -ne 's/.*\(--[-A-Za-z0-9]\{1,\}\).*/\1/p' | sort -u )" \
-- "$cur" ) )
elif [[ "$1" == @(mk|rm)dir ]]; then
_filedir -d
else
_filedir
fi
}
# makeinfo and texi2dvi are defined elsewhere.
for i in a2ps awk bash bc bison cat colordiff cp csplit \
curl cut date df diff dir du enscript env expand fmt fold gperf gprof \
grep grub head indent irb ld ldd less ln ls m4 md5sum mkdir mkfifo mknod \
mv netstat nl nm objcopy objdump od paste patch pr ptx readelf rm rmdir \
sed seq sha{,1,224,256,384,512}sum shar sort split strip tac tail tee \
texindex touch tr uname unexpand uniq units vdir wc wget who; do
have $i && complete -F _longopt -o default $i
done
unset i
_filedir_xspec()
{
local IFS cur xspec
IFS=$'\n'
COMPREPLY=()
_get_comp_words_by_ref cur
_expand || return 0
# get first exclusion compspec that matches this command
xspec=$( awk "/^complete[ \t]+.*[ \t]${1##*/}([ \t]|\$)/ { print \$0; exit }" \
"$BASH_COMPLETION" )
# prune to leave nothing but the -X spec
xspec=${xspec#*-X }
xspec=${xspec%% *}
local -a toks
local tmp
toks=( ${toks[@]-} $(
compgen -d -- "$(quote_readline "$cur")" | {
while read -r tmp; do
# see long TODO comment in _filedir() --David
printf '%s\n' $tmp
done
}
))
# Munge xspec to contain uppercase version too
eval xspec="${xspec}"
local matchop=!
if [[ $xspec == !* ]]; then
xspec=${xspec#!}
matchop=@
fi
[[ ${BASH_VERSINFO[0]} -ge 4 ]] && \
xspec="$matchop($xspec|${xspec^^})" || \
xspec="$matchop($xspec|$(printf %s $xspec | tr '[:lower:]' '[:upper:]'))"
toks=( ${toks[@]-} $(
eval compgen -f -X "!$xspec" -- "\$(quote_readline "\$cur")" | {
while read -r tmp; do
[ -n $tmp ] && printf '%s\n' $tmp
done
}
))
[ ${#toks[@]} -ne 0 ] && _compopt_o_filenames
COMPREPLY=( "${toks[@]}" )
}
list=( $( sed -ne '/^# START exclude/,/^# FINISH exclude/p' "$BASH_COMPLETION" | \
# read exclusion compspecs
(
while read line
do
# ignore compspecs that are commented out
if [ "${line#\#}" != "$line" ]; then continue; fi
line=${line%# START exclude*}
line=${line%# FINISH exclude*}
line=${line##*\'}
list=( "${list[@]}" $line )
done
printf '%s ' "${list[@]}"
)
) )
# remove previous compspecs
if [ ${#list[@]} -gt 0 ]; then
eval complete -r ${list[@]}
# install new compspecs
eval complete -F _filedir_xspec "${list[@]}"
fi
unset list
# source completion directory definitions
if [[ -d $BASH_COMPLETION_COMPAT_DIR && -r $BASH_COMPLETION_COMPAT_DIR && \
-x $BASH_COMPLETION_COMPAT_DIR ]]; then
for i in $(LC_ALL=C command ls "$BASH_COMPLETION_COMPAT_DIR"); do
i=$BASH_COMPLETION_COMPAT_DIR/$i
[[ ${i##*/} != @(*~|*.bak|*.swp|\#*\#|*.dpkg*|*.rpm@(orig|new|save)|Makefile*) \
&& -f $i && -r $i ]] && . "$i"
done
fi
if [[ $BASH_COMPLETION_DIR != $BASH_COMPLETION_COMPAT_DIR && \
-d $BASH_COMPLETION_DIR && -r $BASH_COMPLETION_DIR && \
-x $BASH_COMPLETION_DIR ]]; then
for i in $(LC_ALL=C command ls "$BASH_COMPLETION_DIR"); do
i=$BASH_COMPLETION_DIR/$i
[[ ${i##*/} != @(*~|*.bak|*.swp|\#*\#|*.dpkg*|*.rpm@(orig|new|save)|Makefile*) \
&& -f $i && -r $i ]] && . "$i"
done
fi
unset i
# source user completion file
[[ $BASH_COMPLETION != ~/.bash_completion && -r ~/.bash_completion ]] \
&& . ~/.bash_completion
unset -f have
unset UNAME USERLAND have
set $BASH_COMPLETION_ORIGINAL_V_VALUE
unset BASH_COMPLETION_ORIGINAL_V_VALUE
# Local variables:
# mode: shell-script
# sh-basic-offset: 4
# sh-indent-comment: t
# indent-tabs-mode: nil
# End:
# ex: ts=4 sw=4 et filetype=sh
And I don't have a ~/.bash_aliases
Adv Reply
Bookmarks