I used the following steps to enable my Broadcom Wireless BCM4312 (rev 02).
Step 1 (run in terminal)
echo 'blacklist bcm43xx' | sudo tee -a /etc/modprobe.d/blacklist
sudo apt-get install ndiswrapper-utils-1.9
mkdir ~/bcm43xx; cd ~/bcm43xx
For Step 2, You can check your Broadcom wireless version with this command in terminal : "lspci | grep Broadcom\ Corporation",if your wireless device is different from BCM4312 (rev 02), please refer to the following link for this step and you can continue again with step 3 onwards:
https://help.ubuntu.com/community/Wi...f971ca757b2851
Step 2 (run in terminal)
sudo apt-get install cabextract
wget ftp://ftp.compaq.com/pub/softpaq/sp3...00/sp34152.exe
cabextract sp34152.exe
Step 3 (run in terminal)
sudo ndiswrapper -i bcmwl5.inf
ndiswrapper -l
sudo depmod -a
sudo modprobe ndiswrapper
sudo cp /etc/network/interfaces /etc/network/interfaces.orig
echo -e 'auto lo\niface lo inet loopback\n' | sudo tee /etc/network/interfaces
sudo ndiswrapper -m
echo 'ndiswrapper' | sudo tee -a /etc/modules
echo 'ENABLED=0' | sudo tee -a /etc/default/wpasupplicant
Step 4 (run in terminal)
sudo aptitude remove b43-fwcutter
Step 5 (run in terminal)
sudo gedit /etc/init.d/wirelessfix.sh
Step 6
Paste the followings in the opened file(wirelessfix.sh)and make sure you save it before continuing Step 7
#!/bin/bash
modprobe -r b44
modprobe -r b43
modprobe -r b43legacy
modprobe -r ssb
modprobe -r ndiswrapper
modprobe ndiswrapper
modprobe b44
Step 7 (run in terminal)
Run this :
cd /etc/init.d/ && sudo chmod 755 wirelessfix.sh
Step 8 (run in terminal)
finally run this:
sudo update-rc.d wirelessfix.sh defaults
Step 9
Restart your machine and enjoy the freedom from those wires....
Bookmarks