[ubuntu] msp430 usb jtag programmer on 8.04

[jcoffland]

Ok, I solved my problem. After following the above procedure the attached file made it work automatically.

Download the attachment and then:

cp 026_ti_usb_3410.rules.txt /etc/udev/rules.d/026_ti_usb_3410.rules

For some reason the path to bConfigurationValue for this device is different on my system (Hardy).

[Waq]

strange, whenever I punch in
$sudo /bin/bash -c 'echo 2 >/sys/bus/usb/devices/2-2/bConfigurationValue'
I get : /bin/bash: line 0: echo: write error: Invalid argument

I am using 2.6.24-19-generic, ubuntu hardy.

I also tried recompiling the module as jcoffland earlier mentioned but to no avail.
[edit#1: oops, it worked on a second try. I guess I was not doing sth right.]

As a solution, I recompiled latest stable (2.6.26) vanilla kernel and Jtag sarted working, though everything else (nvidia display, sound, hibernation etc..) broke down.

I would still like to use my original 2.6.24-19-generic kernel. Any suggestions on making this Jtag device run on this kernel ...
[edit#1: Now it works.]
JTAG Device I am using : MSP-FET430UIF, usb model