Wacom Intuos 2 tablet stops working after unplugged and replugged
Hi, I recently got an old Wacom Intuos 2 tablet and am using it with a laptop (Lenovo W520, i7 processor) with Ubuntu 12.04 (64b). My xorg version is 1.11.3.
My tablet works fine when first plugged in, but if I unplug it and replug it, then it stops working and the only way to get it to start working again is by rebooting. More specifically, the lights on the tablet come on when I move the pen, but it isn't recognized as input--nothing changes on the screen.
I looked around online and saw a lot of cases where this wasn't solved or solved via hotplugging, but is that only applicable to earlier versions of xorg?
Sorry if there's an obvious fix here--I'm an ubuntu newbie and am pretty stuck.
Here's what I've tried:
--I've updated all the drivers--nothing's changed.
--modprobe does nothing.
--lsmod does show wacom:
Module Size Used by
pci_stub 12622 1
vboxpci 23237 0
joydev 17693 0
wacom 53300 0
arc4 12529 2
--lsusb shows wacom:
lsusb | grep Wacom
Bus 001 Device 007: ID 056a:0042 Wacom Co., Ltd Intuos2 6x8
--xinput shows wacom:
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ stylus id=6 [slave pointer (2)]
⎜ ↳ eraser id=7 [slave pointer (2)]
⎜ ↳ cursor id=8 [slave pointer (2)]
⎜ ↳ SynPS/2 Synaptics TouchPad id=14 [slave pointer (2)]
⎜ ↳ TPPS/2 IBM TrackPoint id=16 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=9 [slave keyboard (3)]
↳ Video Bus id=10 [slave keyboard (3)]
↳ Sleep Button id=11 [slave keyboard (3)]
↳ Integrated Camera id=12 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=13 [slave keyboard (3)]
↳ ThinkPad Extra Buttons id=15 [slave keyboard (3)]
--results from xsetwacom:
stylus id: 6 type: STYLUS
eraser id: 7 type: ERASER
cursor id: 8 type: CURSOR
I'm just stuck...do you have any suggestions?
Thanks so much!
Tags for this Thread