I can't seem to get my wireless working, the hardware switch is on but I can only get onto the network using ethernet.
Other PCs on the network working OK.
I've tried installing the driver and it's showing as installed, but still no joy.
Here is the lshw output:
Code:
steve@steve-HP-Pavilion-dv6000-GB166EA-ABU:~$ sudo lshw -C network
*-network UNCLAIMED
description: Network controller
product: BCM4311 802.11b/g WLAN
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:02:00.0
version: 01
width: 32 bits
clock: 33MHz
capabilities: pm msi pciexpress bus_master cap_list
configuration: latency=0
resources: memory:d6000000-d6003fff
*-network
description: Ethernet interface
product: PRO/100 VE Network Connection
vendor: Intel Corporation
physical id: 8
bus info: pci@0000:05:08.0
logical name: eth0
version: 02
serial: 00:1b:24:00:57:8b
size: 100Mbit/s
capacity: 100Mbit/s
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=e100 driverversion=3.5.24-k2-NAPI duplex=full ip=192.168.1.127 latency=64 link=yes maxlatency=56 mingnt=8 multicast=yes port=MII speed=100Mbit/s
resources: irq:20 memory:d8000000-d8000fff ioport:4000(size=64)
Bookmarks