Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: What is the command that pulls up all of your system information?

  1. #1
    Join Date
    Jun 2012
    Beans
    51

    Question What is the command that pulls up all of your system information?

    Please!

  2. #2
    Join Date
    Jul 2010
    Location
    ozarks, Arkansas, USA
    Beans
    6,094
    Distro
    Lubuntu 14.04 Trusty Tahr

    Re: What is the command that pulls up all of your system information?

    RTIInstaller; Hi !

    I do not know of any one command that "that pulls up all of your system information?"
    A lot depends on the info you are seeking.
    Here is a few for hardware and processes:
    Code:
    sudo dmidecode
    sudo lspci
    lsusb
    lshal
    lshw
    ------------------
    fdisk -lu
    df -h
    du -h <dir>
    top
    uname -a
    lsb_release -a
    And probably a thousand more ....is there something specific you have in mind ?
    warm regards <==BDQ

  3. #3
    Join Date
    Jun 2012
    Beans
    51

    Smile Re: What is the command that pulls up all of your system information?

    Quote Originally Posted by Bashing-om View Post
    RTIInstaller; Hi !

    I do not know of any one command that "that pulls up all of your system information?"
    A lot depends on the info you are seeking.
    Here is a few for hardware and processes:
    Code:
    sudo dmidecode
    sudo lspci
    lsusb
    lshal
    lshw
    ------------------
    fdisk -lu
    df -h
    du -h <dir>
    top
    uname -a
    lsb_release -a
    And probably a thousand more ....is there something specific you have in mind ?
    warm regards <==BDQ
    Thank you thank, I am at my wits end with this install and I am running out of time as I only have a day left to get this functional before I have to leave town.

    Can not connect to port 6543? I get this over and over I’m stumped. I have re-installed several times. Back end / front end machine. have a pre-exisiting raid full of movies that I want to migrate to mythbuntu but for the life of me I don't know what I am doing wrong. I just get the upnp error and the cannot connect to 6543.


    Code:
    Starting mythfrontend.real..
      2012-10-03 17:03:24.114 mythfrontend version: fixes/0.24 [v0.24.1-80-g1de0431] www.mythtv.org
      2012-10-03 17:03:24.114 Using runtime prefix = /usr
      2012-10-03 17:03:24.114 Using configuration directory = /home/aaron/.mythtv
      2012-10-03 17:03:24.179 ThreadPool:HTTP: Initial 1, Max 25, Timeout 60000
      2012-10-03 17:03:25.317 Empty LocalHostName.
      2012-10-03 17:03:25.318 Using localhost value of backend
      2012-10-03 17:03:25.464 New DB connection, total: 1
      2012-10-03 17:03:25.480 Connected to database 'mythconverg' at host: localhost
      2012-10-03 17:03:25.508 Closing DB connection named 'DBManager0'
      2012-10-03 17:03:25.509 Connected to database 'mythconverg' at host: localhost
      2012-10-03 17:03:25.649 Current locale EN_US
      2012-10-03 17:03:25.650 Reading locale defaults from /usr/share/mythtv//locales/en_us.xml
      2012-10-03 17:03:27.695 ScreenSaverX11Private: XScreenSaver support enabled
      2012-10-03 17:03:27.697 DPMS is disabled.
      2012-10-03 17:03:29.070 Desktop video mode: 1600x900 60.000 Hz
      2012-10-03 17:03:29.791 Enabled verbose msgs:  important general
      2012-10-03 17:03:29.958 Loading en_us translation for module mythfrontend
      2012-10-03 17:03:30.439 LIRC, Error: Failed to connect to Unix socket '/dev/lircd'
                              eno: No such file or directory (2)
      /var/log/mythtv/mythfrontend.log
       
      apt-cache policy mythtv-common
      mythtv-common:
        Installed: 2:0.24.0+fixes.20110908.1de0431-0ubuntu1
        Candidate: 2:0.24.0+fixes.20110908.1de0431-0ubuntu1
        Version table:
       *** 2:0.24.0+fixes.20110908.1de0431-0ubuntu1 0
              500 http://us.archive.ubuntu.com/ubuntu/ oneiric/multiverse i386 Packages
              100 /var/lib/dpkg/status
    Code:
    H/W path               Device      Class       Description
      ==========================================================
                                         system      Desktop Computer
      /0                                 bus         MS-7267
      /0/0                               memory      64KiB BIOS
      /0/4                               processor   Intel(R) Core(TM)2 Duo CPU     E4
      /0/4/5                             memory      64KiB L1 cache
      /0/4/6                             memory      2MiB L2 cache
      /0/4/0.1                           processor   Logical CPU
      /0/4/0.2                           processor   Logical CPU
      /0/f                               memory      1GiB System Memory
      /0/f/0                             memory      512MiB DIMM SDRAM Synchronous
      /0/f/1                             memory      DIMM [empty]
      /0/f/2                             memory      512MiB DIMM SDRAM Synchronous
      /0/f/3                             memory      DIMM [empty]
      /0/1                               processor   
      /0/1/0.1                           processor   Logical CPU
      /0/1/0.2                           processor   Logical CPU
      /0/100                             bridge      82945G/GZ/P/PL Memory Controller 
      /0/100/2                           display     82945G/GZ Integrated Graphics Con
      /0/100/1b                          multimedia  N10/ICH 7 Family High Definition 
      /0/100/1c                          bridge      N10/ICH 7 Family PCI Express Port
      /0/100/1d                          bus         N10/ICH 7 Family USB UHCI Control
      /0/100/1d.1                        bus         N10/ICH 7 Family USB UHCI Control
      /0/100/1d.2                        bus         N10/ICH 7 Family USB UHCI Control
      /0/100/1d.3                        bus         N10/ICH 7 Family USB UHCI Control
      /0/100/1d.7                        bus         N10/ICH 7 Family USB2 EHCI Contro
      /0/100/1e                          bridge      82801 PCI Bridge [8086:244E]
      /0/100/1e/2            scsi4       storage     9xxx-series SATA-RAID [13C1:1002]
      /0/100/1e/2/0.0.0      /dev/sdb    disk        4499GB 9500S-8    DISK
      /0/100/1e/2/0.0.0/1    /dev/sdb1   volume      4190GiB Data partition
      /0/100/1e/4            eth0        network     RTL-8110SC/8169SC Gigabit Etherne
      /0/100/1f                          bridge      82801GB/GR (ICH7 Family) LPC Inte
      /0/100/1f.1            scsi0       storage     82801G (ICH7 Family) IDE Controll
      /0/100/1f.1/0.1.0      /dev/cdrom  disk        DVD D  DH16D2P
      /0/100/1f.2            scsi3       storage     N10/ICH7 Family SATA IDE Controll
      /0/100/1f.2/0.0.0      /dev/sda    disk        1500GB ST31500341AS
      /0/100/1f.2/0.0.0/1    /dev/sda1   volume      1396GiB EXT4 volume
      /0/100/1f.2/0.0.0/2    /dev/sda2   volume      1014MiB Extended partition
      /0/100/1f.2/0.0.0/2/5  /dev/sda5   volume      1014MiB Linux swap / Solaris part
      /0/100/1f.3                        bus         N10/ICH 7 Family SMBus Controller
       
      sudo blkid -c /dev/null -o list
      device     fs_type label    mount point    UUID
      -------------------------------------------------------------------------------
      /dev/sda1  ext4             /              d80b81b8-3030-46e4-b2e7-b70e802f5281
      /dev/sda5  swap             <swap>         53036505-44bb-4009-b519-bffe4324d5ff
      /dev/sdb1  ext2             (not mounted)  3d6c407c-1527-4fcf-866f-50384add4c01
       
      # dmidecode 2.9
      SMBIOS 2.3 present.
      27 structures occupying 1346 bytes.
      Table at 0x000FCEB0.
       
      Handle 0x0000, DMI type 0, 24 bytes
      BIOS Information
              Vendor: American Megatrends Inc.
              Version: 080013 
              Release Date: 09/21/2006
              Address: 0xF0000
              Runtime Size: 64 kB
              ROM Size: 512 kB
              Characteristics:
                      ISA is supported
                      PCI is supported
                      PNP is supported
                      APM is supported
                      BIOS is upgradeable
                      BIOS shadowing is allowed
                      ESCD support is available
                      Boot from CD is supported
                      Selectable boot is supported
                      BIOS ROM is socketed
                      EDD is supported
                      5.25"/1.2 MB floppy services are supported (int 13h)
                      3.5"/720 KB floppy services are supported (int 13h)
                      3.5"/2.88 MB floppy services are supported (int 13h)
                      Print screen service is supported (int 5h)
                      8042 keyboard services are supported (int 9h)
                      Serial services are supported (int 14h)
                      Printer services are supported (int 17h)
                      CGA/mono video services are supported (int 10h)
                      ACPI is supported
                      USB legacy is supported
                      LS-120 boot is supported
                      ATAPI Zip drive boot is supported
                      BIOS boot specification is supported
              BIOS Revision: 8.13
       
      Handle 0x0001, DMI type 1, 27 bytes
      System Information
              Manufacturer: MSI
              Product Name: MS-7267
              Version: 3.0
              Serial Number: To Be Filled By O.E.M.
              UUID: 00020003-0004-0005-0006-000700080009
              Wake-up Type: Power Switch
              SKU Number: To Be Filled By O.E.M.
              Family: To Be Filled By O.E.M.
       
      Handle 0x0002, DMI type 2, 15 bytes
      Base Board Information
              Manufacturer: MSI
              Product Name: MS-7267
              Version: 3.0
              Serial Number: To be filled by O.E.M.
              Asset Tag: To Be Filled By O.E.M.
              Features:
                      Board is a hosting board
                      Board is replaceable
              Location In Chassis: To Be Filled By O.E.M.
              Chassis Handle: 0x0003
              Type: Motherboard
              Contained Object Handles: 0
       
      Handle 0x0003, DMI type 3, 21 bytes
      Chassis Information
              Manufacturer: To Be Filled By O.E.M.
              Type: Desktop
              Lock: Not Present
              Version: To Be Filled By O.E.M.
              Serial Number: To Be Filled By O.E.M.
              Asset Tag: To Be Filled By O.E.M.
              Boot-up State: Safe
              Power Supply  State: Safe
              Thermal State: Safe
              Security Status: None
              OEM Information: 0x00000000
              Height: Unspecified
              Number Of Power Cords: 1
              Contained Elements: 0
       
      Handle 0x0004, DMI type 4, 35 bytes
      Processor Information
              Socket Designation: CPU 1
              Type: Central Processor
              Family: <OUT OF SPEC>
              Manufacturer: Intel            
              ID: FD 06 00 00 FF FB EB BF
              Version: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz     
              Voltage: 1.2 V
              External Clock: 200 MHz
              Max Speed: 2200 MHz
              Current Speed: 1466 MHz
              Status: Populated, Enabled
              Upgrade: Other
              L1 Cache Handle: 0x0005
              L2 Cache Handle: 0x0006
              L3 Cache Handle: 0x0007
              Serial Number: To Be Filled By O.E.M.
              Asset Tag: To Be Filled By O.E.M.
              Part Number: To Be Filled By O.E.M.
       
      Handle 0x0005, DMI type 7, 19 bytes
      Cache Information
              Socket Designation: L1-Cache
              Configuration: Enabled, Not Socketed, Level 1
              Operational Mode: Write Back
              Location: Internal
              Installed Size: 64 KB
              Maximum Size: 64 KB
              Supported SRAM Types:
                      Other
              Installed SRAM Type: Other
              Speed: Unknown
              Error Correction Type: Parity
              System Type: Data
              Associativity: 8-way Set-associative
       
      Handle 0x0006, DMI type 7, 19 bytes
      Cache Information
              Socket Designation: L2-Cache
              Configuration: Enabled, Not Socketed, Level 2
              Operational Mode: Write Back
              Location: Internal
              Installed Size: 2048 KB
              Maximum Size: 2048 KB
              Supported SRAM Types:
                      Other
              Installed SRAM Type: Other
              Speed: Unknown
              Error Correction Type: Single-bit ECC
              System Type: Instruction
              Associativity: 8-way Set-associative
       
      Handle 0x0007, DMI type 7, 19 bytes
      Cache Information
              Socket Designation: L3-Cache
              Configuration: Disabled, Not Socketed, Level 3
              Operational Mode: Unknown
              Location: Internal
              Installed Size: 0 KB
              Maximum Size: 0 KB
              Supported SRAM Types:
                      Unknown
              Installed SRAM Type: Unknown
              Speed: Unknown
              Error Correction Type: Unknown
              System Type: Unknown
              Associativity: Unknown
       
      Handle 0x0008, DMI type 5, 24 bytes
      Memory Controller Information
              Error Detecting Method: 64-bit ECC
              Error Correcting Capabilities:
                      None
              Supported Interleave: One-way Interleave
              Current Interleave: One-way Interleave
              Maximum Memory Module Size: 4096 MB
              Maximum Total Memory Size: 16384 MB
              Supported Speeds:
                      Other
              Supported Memory Types:
                      DIMM
                      SDRAM
              Memory Module Voltage: 3.3 V
              Associated Memory Slots: 4
                      0x0009
                      0x000A
                      0x000B
                      0x000C
              Enabled Error Correcting Capabilities:
                      None
       
      Handle 0x0009, DMI type 6, 12 bytes
      Memory Module Information
              Socket Designation: DIMM0
              Bank Connections: 0 1
              Current Speed: Unknown
              Type: DIMM SDRAM
              Installed Size: 512 MB (Single-bank Connection)
              Enabled Size: 512 MB (Single-bank Connection)
              Error Status: OK
       
      Handle 0x000A, DMI type 6, 12 bytes
      Memory Module Information
              Socket Designation: DIMM1
              Bank Connections: 2 3
              Current Speed: Unknown
              Type: DIMM SDRAM
              Installed Size: Not Installed
              Enabled Size: Not Installed
              Error Status: OK
       
      Handle 0x000B, DMI type 6, 12 bytes
      Memory Module Information
              Socket Designation: DIMM2
              Bank Connections: 4 5
              Current Speed: Unknown
              Type: DIMM SDRAM
              Installed Size: 512 MB (Single-bank Connection)
              Enabled Size: 512 MB (Single-bank Connection)
              Error Status: OK
       
      Handle 0x000C, DMI type 6, 12 bytes
      Memory Module Information
              Socket Designation: DIMM3
              Bank Connections: 6 7
              Current Speed: Unknown
              Type: DIMM SDRAM
              Installed Size: Not Installed
              Enabled Size: Not Installed
              Error Status: OK
       
      Handle 0x000D, DMI type 13, 22 bytes
      BIOS Language Information
              Installable Languages: 1
                      en|US|iso8859-1
              Currently Installed Language: en|US|iso8859-1
       
      Handle 0x000E, DMI type 15, 55 bytes
      System Event Log
              Area Length: 1008 bytes
              Header Start Offset: 0x1810
              Header Length: 16 bytes
              Data Start Offset: 0x1820
              Access Method: General-purpose non-volatile data functions
              Access Address: 0x0002
              Status: Valid, Not Full
              Change Token: 0x00000000
              Header Format: Type 1
              Supported Log Type Descriptors: 9
              Descriptor 1: Single-bit ECC memory error
              Data Format 1: Multiple-event handle
              Descriptor 2: Multi-bit ECC memory error
              Data Format 2: Multiple-event handle
              Descriptor 3: Parity memory error
              Data Format 3: Multiple-event
              Descriptor 4: I/O channel block
              Data Format 4: Multiple-event
              Descriptor 5: POST error
              Data Format 5: POST results bitmap
              Descriptor 6: PCI parity error
              Data Format 6: Multiple-event handle
              Descriptor 7: PCI system error
              Data Format 7: Multiple-event handle
              Descriptor 8: System limit exceeded
              Data Format 8: Multiple-event system management
              Descriptor 9: OEM-specific
              Data Format 9: POST results bitmap
       
      Handle 0x000F, DMI type 16, 15 bytes
      Physical Memory Array
              Location: System Board Or Motherboard
              Use: System Memory
              Error Correction Type: None
              Maximum Capacity: 4 GB
              Error Information Handle: Not Provided
              Number Of Devices: 4
       
      Handle 0x0010, DMI type 19, 15 bytes
      Memory Array Mapped Address
              Starting Address: 0x00000000000
              Ending Address: 0x0003FFFFFFF
              Range Size: 1 GB
              Physical Array Handle: 0x000F
              Partition Width: 0
       
      Handle 0x0011, DMI type 17, 27 bytes
      Memory Device
              Array Handle: 0x000F
              Error Information Handle: Not Provided
              Total Width: 64 bits
              Data Width: 64 bits
              Size: 512 MB
              Form Factor: DIMM
              Set: None
              Locator: DIMM0
              Bank Locator: BANK0
              Type: SDRAM
              Type Detail: Synchronous
              Speed: Unknown
              Manufacturer: Manufacturer0
              Serial Number: SerNum0
              Asset Tag: AssetTagNum0
              Part Number: PartNum0
       
      Handle 0x0012, DMI type 20, 19 bytes
      Memory Device Mapped Address
              Starting Address: 0x00000000000
              Ending Address: 0x0001FFFFFFF
              Range Size: 512 MB
              Physical Device Handle: 0x0011
              Memory Array Mapped Address Handle: 0x0010
              Partition Row Position: 1
              Interleaved Data Depth: 1
       
      Handle 0x0013, DMI type 17, 27 bytes
      Memory Device
              Array Handle: 0x000F
              Error Information Handle: Not Provided
              Total Width: Unknown
              Data Width: Unknown
              Size: No Module Installed
              Form Factor: DIMM
              Set: None
              Locator: DIMM1
              Bank Locator: BANK1
              Type: Unknown
              Type Detail: Unknown
              Speed: Unknown
              Manufacturer: Manufacturer1
              Serial Number: SerNum1
              Asset Tag: AssetTagNum1
              Part Number: PartNum1
       
      Handle 0x0014, DMI type 20, 19 bytes
      Memory Device Mapped Address
              Starting Address: 0x00000000000
              Ending Address: 0x000000003FF
              Range Size: 1 kB
              Physical Device Handle: 0x0013
              Memory Array Mapped Address Handle: 0x0010
              Partition Row Position: 1
              Interleaved Data Depth: 1
       
      Handle 0x0015, DMI type 17, 27 bytes
      Memory Device
              Array Handle: 0x000F
              Error Information Handle: Not Provided
              Total Width: 64 bits
              Data Width: 64 bits
              Size: 512 MB
              Form Factor: DIMM
              Set: None
              Locator: DIMM2
              Bank Locator: BANK2
              Type: SDRAM
              Type Detail: Synchronous
              Speed: Unknown
              Manufacturer: Manufacturer2
              Serial Number: SerNum2
              Asset Tag: AssetTagNum2
              Part Number: PartNum2
       
      Handle 0x0016, DMI type 20, 19 bytes
      Memory Device Mapped Address
              Starting Address: 0x00020000000
              Ending Address: 0x0003FFFFFFF
              Range Size: 512 MB
              Physical Device Handle: 0x0015
              Memory Array Mapped Address Handle: 0x0010
              Partition Row Position: 1
              Interleaved Data Depth: 1
       
      Handle 0x0017, DMI type 17, 27 bytes
      Memory Device
              Array Handle: 0x000F
              Error Information Handle: Not Provided
              Total Width: Unknown
              Data Width: Unknown
              Size: No Module Installed
              Form Factor: DIMM
              Set: None
              Locator: DIMM3
              Bank Locator: BANK3
              Type: Unknown
              Type Detail: Unknown
              Speed: Unknown
              Manufacturer: Manufacturer3
              Serial Number: SerNum3
              Asset Tag: AssetTagNum3
              Part Number: PartNum3
       
      Handle 0x0018, DMI type 20, 19 bytes
      Memory Device Mapped Address
              Starting Address: 0x00000000000
              Ending Address: 0x000000003FF
              Range Size: 1 kB
              Physical Device Handle: 0x0017
              Memory Array Mapped Address Handle: 0x0010
              Partition Row Position: 1
              Interleaved Data Depth: 1
       
      Handle 0x0019, DMI type 32, 20 bytes
      System Boot Information
              Status: No errors detected
       
      Handle 0x001A, DMI type 127, 4 bytes
      End Of Table
       
      aaron@backend:~$
    Last edited by oldfred; October 5th, 2012 at 05:13 AM. Reason: Added code tags (# in edit menu)

  4. #4
    Join Date
    Jun 2009
    Location
    Chicago Suburbs
    Beans
    Hidden!
    Distro
    Ubuntu 12.04 Precise Pangolin

    Re: What is the command that pulls up all of your system information?

    Please use code tags. Highlight like copy & paste and click on # in edit panel and you can automatically add them.

    I do not know RAID nor mythbuntu.

    But to get Ubuntu to work with RAID you have to use the Alternative installer or add drivers if not directly installed into the RAID to allow you to mount the RAID.

    Does Ubuntu boot? Do you add RAID drivers and enable your RAID system?

    With Linux RAID & LVM
    https://help.ubuntu.com/12.04/server...tallation.html
    For info on UEFI boot install & repair:
    http://ubuntuforums.org/showthread.php?t=2147295
    Please use Thread Tools above first post to close thread when/if answered completely.







  5. #5
    Join Date
    Jun 2012
    Beans
    51

    Re: What is the command that pulls up all of your system information?

    Quote Originally Posted by oldfred View Post
    Please use code tags. Highlight like copy & paste and click on # in edit panel and you can automatically add them.

    I do not know RAID nor mythbuntu.

    But to get Ubuntu to work with RAID you have to use the Alternative installer or add drivers if not directly installed into the RAID to allow you to mount the RAID.

    Does Ubuntu boot? Do you add RAID drivers and enable your RAID system?

    With Linux RAID & LVM
    https://help.ubuntu.com/12.04/server...tallation.html
    My raid is working But am having serious myth issues with connecting to the backend port and upnp problems

  6. #6
    Join Date
    Mar 2007
    Location
    Christchurch, NZ
    Beans
    3,239

    Re: What is the command that pulls up all of your system information?

    Quote Originally Posted by RTIInstaller View Post
    My raid is working But am having serious myth issues with connecting to the backend port and upnp problems
    Perhaps describe EXACTLY the problem you are seeing and where you se it.

  7. #7
    Join Date
    Jun 2012
    Beans
    51

    Question Re: What is the command that pulls up all of your system information?

    Quote Originally Posted by nickrout View Post
    Perhaps describe EXACTLY the problem you are seeing and where you se it.
    I just re-installed from scratch carfully walking through each step and now I am not getting upnp error nor the cant find port 6543 error.

    as a test I copied some VOB movies and covert art files over to the appropriate myth lib folders.

    I just closed the front end setup and all I have now is the dark grey desktop, its been this way for the last 15 minutes, I am kind of afraid to mess with it because I am not sure if it is doing something in the background?

  8. #8
    Join Date
    Mar 2007
    Location
    Christchurch, NZ
    Beans
    3,239

    Re: What is the command that pulls up all of your system information?

    Does your TV have overscan? The menu bar may be off the edge of the screen.

    If so, start a new thread with an exact description of your hardware (particularly graphics card), driver versions for the graphics card and so forth.

    If it is overscan your TV set hopefully has the best fix, setting the TV to not overscan. That depends on the TV though.

    As I say, new problem, new thread, precise description.

  9. #9
    Join Date
    Jun 2012
    Beans
    51

    Talking Re: What is the command that pulls up all of your system information?

    Quote Originally Posted by nickrout View Post
    Does your TV have overscan? The menu bar may be off the edge of the screen.

    If so, start a new thread with an exact description of your hardware (particularly graphics card), driver versions for the graphics card and so forth.

    If it is overscan your TV set hopefully has the best fix, setting the TV to not overscan. That depends on the TV though.

    As I say, new problem, new thread, precise description.
    Ok I will start a new thread. I am using a computer monitor for setup purposes.

    Thanks

  10. #10
    Join Date
    Jun 2012
    Beans
    51

    Re: What is the command that pulls up all of your system information?

    Quote Originally Posted by Bashing-om View Post
    RTIInstaller; Hi !

    I do not know of any one command that "that pulls up all of your system information?"
    A lot depends on the info you are seeking.
    Here is a few for hardware and processes:
    Code:
    sudo dmidecode
    sudo lspci
    lsusb
    lshal
    lshw
    ------------------
    fdisk -lu
    df -h
    du -h <dir>
    top
    uname -a
    lsb_release -a
    And probably a thousand more ....is there something specific you have in mind ?
    warm regards <==BDQ
    Can you pull up myth error logs from a terminal?

Page 1 of 2 12 LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •