This thread, dating back to 2006, has now served its purpose. A lot of what is written here is obsolete, and the thread is now closed.
A new sticky thread is available at
Comprehensive Sound Problem Solutions Guide v0.5e
Version History (DD-MM-YY)
28-06-06 - version 0.1 - initial creation
28-06-06 - version 0.2 - alsa-source guide added
28-06-06 - version 0.3 - alsa-drivers from alsa-project guide added
29-06-06 - version 0.4 - multiple sounds and multiple cards support added
02-07-06 - version 0.4 - fixed mistake spotted by Jvaldezjr
04-07-06 - version 0.5a - layout changes - starting on MIDI guide - Read *EXPERIMENTAL*
04-07-06 - version 0.5a - added part on saving sound settings so they are restored after reboot.
11-07-06 - version 0.5b - added guide for doing a *fresh* kernel installation
13-07-06 - version 0.5c - minor layout edit - moved *fresh* kernel above compilation to see if it is more help and if it solves more problems.
15-07-06 - version 0.5d - usage update
17-07-06 - version 0.5e - added Advanced Guides by other Ubuntuers
21-08-06 - Initial phase of moving page to UDSF
23-08-06 - Added a Further Reading section - first link thanks to segalion.
12-11-06 - version 0.6 - finally added "Adding the current user to the audio group" - and a few formatting fixes
Background / Notes / Warnings
- I can't guarantee if these instructions will work for everybody, and this is definitely a work in progress. But if these instructions can at least help one person out, I'll be happy.
- If anyone has any suggestions or tips in making this post better, feel free to PM me or post below. Credits will be given regardless of how small the improvement.
- If you find that you have followed the instructions on this post that something did not and you don't know why, it will be better if you start a new post and cite the fact that you used the instructions on this guide to solve your problem. Your post might get lost in all the other posts and you might not get help.
- If you however find a solution to your problem, and you fee that the solution should be here, don't hesistate to post. However, please be specific.
- If you cannot use hear anything, and you have just installed Ubuntu, then it could very possibly be a bug. It could be something as simple as not detecting your hardware the first time or evidence of a deeper problem. As fun as it is to find workarounds and fixes on your own or with help, Ubuntu developers need your feedback to see what is not working for you. That's right ladies and gentlemen, they would really really like it if you would file bug reports on http://launchpad.net under the Ubuntu distribution.
- Note: To make it absolutely clear, when I say 'Ubuntu', I mean Ubuntu AND Kubuntu AND Xubuntu (for people who find this confusing - just accept it and don't feel bad - I and probably a whole lot others got confused when we started out).
- Important syntax note: ALSA modules are denoted by the prefix 'snd' followed by the dash ' - ', followed by the module name (i.e. 'via82xx'). So the full name might be something like snd-via82xx. However, in some cases you will see an underscore ' _ ' instead of the dash. This is OK, do not let it confuse you. For all intensive purposes (installing modules or posting on forums) only use the dash ' - '.General Help - Start here if you have no idea why sound is not playing
(1) Go to a shell and type:Code:aplay -l
- Success - You will get a list of the all the soundcards installed on your system. Your sound just might be muted. See alsamixer section.
- Failure - You will get a message likeMove on to step 2.Code:aplay: device_list:221: no soundcard found...(2) Type this into the shell:Code:lspci -v
- Success - At this point, you should see your sound card listed. This is a positive sign because it means that Ubuntu is detecting the presence of your soundcard, but the drivers are not installed/running. Leave your shell running since you will need it.
(3) Check to see if the ALSA driver for your sound card exists. Go to http://www.alsa-project.org/alsa-doc/ and search for your sound card (chipset) manufacturer in the dropdown box. You'll be given a matrix of the sound cards made by the manufacturer. Try to match the chipset you found in step 2 with the driver(green hyperlink text).
- Failure - If it is not listed, then there are a few things that you can do.
- If your soundcard is an onboard sound card, then it might be disabled in the system's BIOS. You will have to reboot and hit the key that lets you enter into the BIOS (usually Delete, F2, or F8).
- If your soundcard is not onboard, make sure that it is properly seated in the PCI slot. If your card is working under Windows then this is not a problem.
- Success - You will have found the driver for your soundcard's chipset.
- Failure - You will have not found the driver for your soundcard chipset. (at the moment I cannot help you, but stay tuned!)(4) Now go back to the shell and typeNow, press the TAB key BEFORE pressing the ENTER key to see a list of modules. Try to find the module that matches the driver you found in step 3.Code:sudo modprobe snd-
For example, my driver is a via82xx so I would type, sudo modprobe snd-via82xx.
- A success here means that your soundcard was installed, but it was not being loaded. Now you have loaded it for the current session.
- To load it for all sessions (you will probably want to do this) you will have to edit /etc/modules (I think this is the file, I'll check once I get to my Dapper PC).
- Type this into the shellCode:sudo nano /etc/modules
- Add only the name of the module to be loaded at the end of the file. In my case, the via82xx module gave me sound so I added "snd-via82xx" to the end of the file.(iii) Make sure that you have all channels unmuted in alsamixer
- See the alsamixer section
- Play media using your favorite media player. Set your audio engine to alsa. In some cases, you have to configure your audio engine within another (media engine) like in Kaffiene in Kubuntu. If you hear sound, hurray!
- One final step. Go onto Saving Sound Settings
- Failure -You have two options
- Move on to Getting the ALSA drivers from a *fresh* kernel. This step is easier and is recommended to users who might have been tinkering with their sound settings and want to revert back to the way it was just after installing Ubuntu (without reinstalling Ubuntu of course )
- Move on to ALSA driver Compilation, if you have not done so already. If you have, please post a new thread with your problem.
Getting the ALSA drivers from a *fresh* kernel
Sometimes, sound might be configured correctly, but for some reason or another (tinkering) it stops working. One way to go back to the old setup is to reinstall Ubuntu. However, this step is actually quite unnecessary since you are reinstalling everything because of one thing.
A faster way, is to just remove the problematic packages and reinstall them cleanly.
(1) Remove these packagesCode:sudo apt-get --purge remove linux-sound-base alsa-base alsa-utils
(2) Reinstall those same packages
Code:sudo apt-get install linux-sound-base alsa-base alsa-utils
[LIST][*][*][LEFT]VERY IMPORTANT NOTE: Ubuntu (GNOME) users have reported that packages 'gdm' and 'ubuntu-desktop' are removed after removing the linux-sound-base packages. If this happens, then do the following
Code:sudo apt-get install gdm ubuntu-desktop
(3) RebootVERY IMPORTANT NOTE: Xubuntu (XFCE) users have reported that packages 'gdm' and 'xubuntu-desktop' are removed after removing the linux-sound-base packages. If this happens, then do the following
Code:sudo apt-get install gdm xubuntu-desktop
Now you may ask "I already had the packages, so why did I go through the trouble of removing them, then installing them". The answer lies in the --purge option which removes all the extra information that accumulated from tinkering and upgrading. After doing a purge then install, the packages are unpackaged as if it they are brand new.
(4) At this point, try usingyou should get your soundcard listed.Code:aplay -l
- Success - Your soundcard is detected. Go onto the Using alsamixer section, then try playing something on your music or media player.
- Failure - Your card was not detected. You should try compiling your driver, so go onto ALSA drive Compilation.ALSA driver Compilation
- If you are here, then either your soundcard driver could not be loaded with modprobe, or you want to compile the drivers yourself from scratch. Good luck to you!
- There are two main ways the sources of alsa-drivers are made available to you. One is though the apt-get system. Using this system would be the recommended system since most of the heavy lifting is done for you.
- The other way, is getting the latest drivers from alsa-project.org. This page has the latest drivers available, which you might want to fix problems with. However, these have not been tested with Ubuntu and therefore should be used with caution.Using alsa-source
- Type the following to shell: (note: module-assistant is optional, it will compile the package for you)Code:sudo apt-get install build-essential linux-headers-$(uname -r) module-assistant alsa-source
- Code:sudo dpkg-reconfigure alsa-source
- You now have a big blue dialog box (left and right keys to choose 'Yes' and 'No', Enter key proceed). Answer yes (for ISA-PNP - recommended by package maintainers), then yes again (for debugging - recommended by package maintainers).
- Now you must pick which driver you want to install. Use space to select and deselect modules, and up and down to navigate.
- From General Help step 3, you should know the name of your driver. Deselect 'all' (the * will go away), and select your driver. In my case, I deselected 'all' then selected 'via82xx'. Hit Enter. Almost home free!
- If you chose module-assistantIf the progress bar reaches 100% with no errors, you will have installed the drivers successfully. Resume this guide from General Help step 4.Code:sudo module-assistant a-i alsa-source
- If you did not choose module-assistant - Remember the name of your soundcard driver and use it place of the blue text below.
Code:cd /usr/src sudo tar xjvf alsa-driver.tar.bz2 cd modules/alsa-driverCode:sudo ./configure --with-kernel=/usr/src/linux-headers-$(uname -r) --with-cards=<enter driver name here e.g. via82xx> --with-oss=yes sudo make sudo make install
If you get no error messages, you will have installed the drivers successfully.
- Success - Resume this guide from General Help step 4.
- Failure - Start a new thread in this thread of the forum. Paste the error message that you get and state that you were following instructions on this page.Using drivers from alsa-project - update I now recommend using the stable version 1.0.12
- The alsa-project route is very similar to the alsa-source route without the module-assistant.
- First you would have to get the alsa-driver tar from alsa-project then pretty much do configure, make and make install again.
- However, I do recommend that you make a specific directory when you compile something from source. Remember the name of your soundcard driver and use it place of the blue text below.Code:mkdir src cd srcmkdir alsacd alsasudo apt-get install build-essential linux-headers-$(uname -r)wget ftp://ftp.alsa-project.org/pub/drive....12rc2.tar.bz2tar xvjf alsa-driver-1.0.12rc2.tar.bz2 cd alsa-driver-1.0.12rc1 sudo ./configure --with-kernel=/usr/src/linux-headers-$(uname -r) --with-cards=<enter driver name here e.g. via82xx> --with-oss=yes sudo make sudo make installIf you get no errors from doing the above then you have successfully compiled alsa-drivers from source. Resume this guide from General Help step 4.
You will now see what appears to be a graphical equalizer. It is more like ten different volume controls in the sample place.
- Type this into a shellCode:alsamixer
Saving Sound Settings
- To navigate around:
- Left and Right Arrow Keys - Move left and right (if you move long enough in one direction you will get back to where you started - you will not fall off the screen )
- Up and Down Arrow Keys - Increase and decrease volume respectively.
- Letter M Key - Mutes/unmutes. If a channel is unmuted, then there is a green box underneath the volume slider. If the channel is muted, the box is grey.
Do this step to ensure that your alsamixer settings are reloaded with each boot. First make sure you have your settings just the way you like them in alsamixer. Then door if this is your nth sound card (where n is the number of soundcards in your computer) replace 0 with n-1. Many thanks to xpix for trying this out.-Code:sudo alsactl store 0
Getting more than one application to use the soundcard at the same time
- You might want to play a game and listen to music on your favorite music player at the same time. To do this successfully, you will have to use ALSA since it supports this feature the best. On all the music players I know of, you can configure the sound engine, to any module that is available.
- The setting is usually found under something like Tools >>> Configure >>> Player Engines.
- For games, it is a bit more tricky since there is not always a way to configure the player engine directly. Most games, however, do support the OSS. ALSA has an OSS module that allows OSS applications to use the ALSA driver.
- To do this you will need the alsa-oss packageCode:sudo apt-get install alsa-oss
- After doing this step, it is very easy to use alsa-oss. In the shell, you can type 'aoss' then the name of the program name you want to use with alsa-oss.Configuring default soundcards / stopping multiple soundcards from switching
Note: This section assumes that you have installed each soundcard properly.
- In a shell, typeCode:cat /proc/asound/modules
- This will give the the name and index of each soundcard you have currently. Make a note of the names, and decide which one you want to be the default card.
- Now typeCode:sudo nano /etc/modprobe.d/alsa-base
- At the very end of the file, add the following (assuming you have 3 cards with module names A, B and C and you want to have them in the order CAB)Code:options snd-C index=0options snd-A index=1 options snd-B index=2Adding the current user to the audio group
A very common cause for a user to not have sound is not having his/her username in the /etc/group.
Thanks to rustybutt for this simple check.
You should see a line similar toCode:grep 'audio' /etc/groupfollowed by a username i.e. if the username is "ubuntu" then you should seeCode:audio:x:29:. If you see something else i.e.Code:audio:x:29:ubuntuyou should add your username to the file by doingCode:audio:x:29:root. Now find the line that looks likeCode:sudo nano /etc/groupand change it toCode:audio:x:29:rootonly replacing moocow with your real username.Code:audio:x:29:root:moocow
Hit CTRL + 0 to save, then CTRL + X to exit. That's the end of that
Getting MIDI To Work - *EXPERIMENTAL*
This section assumes you can successfully hear sound from your soundcard.
First of all, make sure that you actually have a MIDI port on your soundcard. Most onboard soundcards do not have a MIDI port.
Next, open up this file:
Code:sudo nano /etc/modprobe.d/alsa-base
Then add this options line
Code:options <snd module name here i.e. snd-via82xx> mpu_port=0x330
OR if you already have a options line for this soundcard addto the line.Code:mpu_port=0x330
The default MIDI port is 330. You should verify this number in your BIOS if you are not sure. If the number is not listed, it is most likely that the number is 330 (add the 0x for the file).
If you get no errors, you have successfully installed your MIDI port. At the moment, I do not know if any further configuration is necessary.
Miscellaneous Tips and Tricks
Here are a few things that other people have dug up over the course of this guide. Not all tips are meant to work for all hardware (believe me hda-intel will probably have like a mini guide of it's own one day).
- shaviro found the following from this post http://www.ubuntuforums.org/showthread.php?t=153752I wasn't getting any sound out of my Sony Vaio PCG-4B1L ...The crucial thing is to enable everything in alsamixer EXCEPT "external amplifier." (I had to turn off microphone too, to stop feedback).
- Useff had a very annoying problem where he could get sound through alsa from one user, but not through is main account. http://www.ubuntuforums.org/showthread.php?p=1221754. Him and I managed to fix the problem by making sure the main account was in the audio group in /etc/groups (which he was) and deleting the .asoundrc file in the main account's /home directory.
Advanced Guides by other Ubuntuers
- Bo Rosén solved his ISA problem the following way. Thanks to FarEast for his help in the matter.
Thanks to http://ubuntuforums.org/showthread.php?t=127402 this post I got soundblaster 16 isa working. In short addto /etc/modules then create a new file:Code:snd-sb16and enter this line:Code:gedit /etc/modprobe.d/soundCode:options snd-sb16 isapnp=0 port=0x220 irq=5 dma8=1 dma16=5rebootCode:sudo update-modules
- webbca01 figured out how to get AC'97 work with the help of the second last post here and this post. Basically, if you have an intel8x0 module, you can get AC'97 working byand adding this as the last line:Code:sudo nano /etc/modprobe.d/alsa-baseCode:"options snd-intel8x0 ac97_quirk=3"
- Soundblaster Audigy 2 AC3 Passthrough - Howto by dave_euserFurther Reading
http://www.sabi.co.uk/Notes/linuxSoundALSA.html - Some advanced reading on ALSA - thanks segalion
Important - no particular order
On the backburner
- Getting MIDI to work
- Compiling alsa entirely (drivers, utils, oss, etc)
- Getting line input to work if it does not already - for microphones, etc.
- Getting SPDIF output to work if it does not already - for amplifiers, speakers with digital in.
- Scripts for getting configuration that needs to be done in this post to be done automaticallyRelated
Getting keyboard multimedia keys to work - http://doc.gwos.org/index.php/MultimediaKeys
(I personally like the non-keytouch route - configuring xmodmap and then using gnome-keybindings or for KDE (System Settings >> Regional and Language Settings >> Keyboard Shortcuts). The xmodmap route also works for XFCE, but I do not how to configure XFCE application keybindings.
Posts / References /Credits
MultipleCards from alsa.opensrc.org
Every single sound problem error post I have read
The Ubuntu community for being energetic, dynamic, and polite providers of help with Ubuntu Linux in all its flavours.