Results 1 to 2 of 2

Thread: UVC v4l2 Logitech QuickCam Orbit/Sphere AF not detected

Hybrid View

  1. #1
    Join Date
    May 2010
    Beans
    111

    UVC v4l2 Logitech QuickCam Orbit/Sphere AF not detected

    This is just a technical note regarding the device mentioned in the title. Some small note like this would have saved me a lot of time so I am posting this in the hopes that others will find it useful and so that I can look it up later, if I forget.

    This device *is* supported out of box on Ubuntu 12.04 and several previous versions HOWEVER, you cannot plug it into a USB hub. At least not for any of the hubs I own. Your best bet for detection is directly connecting it to your machine. This appears to be the case on both USB versions 2 and 3 nor does it seem to matter whether or not the hub has it's own power.


    user@host:~$ lsusb | grep Quick
    Bus 003 Device 041: ID 046d:0994 Logitech, Inc. QuickCam Orbit/Sphere AF
    user@host:~$

  2. #2
    Join Date
    Nov 2012
    Beans
    1

    v4l2 set control for auto exposure fails

    I am trying to tune C920 webcam for picture quality using v4l2-ctl utility on ubuntu PC. I am unable to set exposure_auto to 'Auto' mode! It can only be set to 'Manual Mode' or in 'Aperture Priority Mode'. Any clues?

    lenovo@ubuntu:~$ v4l2-ctl -d /dev/video1 -c exposure_auto=0
    VIDIOC_S_CTRL: failed: Input/output error
    exposure_auto: Input/output error



    Following are the settings dump of C920 connected to my ubuntu:

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •