I upgraded, and now I have this error...

[mörgæs]

(The old thread is available here).


First: If you are thinking of posting in the thread, please read this post thoroughly.


Ubuntu offers to upgrade to the next release by the push of a button. It is a convenient way of upgrading, but it is also a huge process, and many steps can fail, especially if the system was not stable from the beginning.


This guide is for you, who have tried the upgrade without luck. A lot of different problems can arise from a bad upgrade, for example trouble with the screen card, a slow system, network problems, problems with mice and keyboard or a system which simply does not boot.

Focus is on a classic Buntu install, not Buntu running inside Windows (Wubi). If you have problems with Wubi, the dedicated Wubi thread is a better option.

Whether or not an upgrade is generally safe compared to a clean install is not the topic. If you are reading this, you probably have trouble with an upgrade, and it is not relevant to know how often it works on other machines.

The guide applies to the entire Ubuntu family (Ubuntu, Xubuntu, Kubuntu...), in short 'Buntu'. It is intended to be a low-tech step-by-step solution suitable for everyone. The guide does not solve all possible problems, but hopefully it serves as a first attempt. The process is:


1 - Does the machine like the version of Ubuntu to which you are upgrading?

Lack of hardware support is the reason for many failed upgrades. Though the Buntu developers are going great lengths to ensure that a new version works on most hardware, there are examples that support is missing in new versions, often because the hardware manufacturer does not provide drivers. Screen cards are the typical problem.

Best is to try the new version in a live boot before installing. A live boot is primarily for testing, it does not change anything on the hard drive unless one decides to do so.

If the computer is newer than around 2004, it can boot from a USB memory stick, else you need to boot from CD. In both cases it might be necessary to set the boot order in BIOS.

Buntu has a built-in USB creator, and if you want to create the USB stick using Windows, Unetbootin is recommended. Best is to download the ISO to the hard drive before running Unetbootin.

Burning a CD should be done with the slowest speed available. Some reports indicate that write-once CD's work better than rewritable ones. Should the boot fail, test the CD itself from the boot menu or try booting another machine with the CD.

Remember that the ISO is one big packaged file and not the installation program itself. Hence one needs to choose 'create CD from image' or similar before burning, not transfer the ISO file itself to the CD.


More on booting from USB, including how to get rid of the annoying U3 software found on some USB sticks:
http://psychocats.net/ubuntu/usb
In Buntu, U3 can be removed using u3-tool found in the repositories.


Sometimes boot options (=kernel parameters) are needed in order to get a particular version running:
https://help.ubuntu.com/community/BootOptions
http://ubuntuforums.org/showthread.php?t=1613132
http://www.ubuntu4beginners.blogspot...n-problem.html

The complete list of boot options is here,
http://www.kernel.org/doc/Documentat...parameters.txt
but most often you will only need the ones mentioned above.

If that does not work:


2 - Does the machine work with other versions of Buntu?

There are always three or four supported releases of Buntu for the desktop and five on server side. They can be very different regarding hardware support, so don't take for granted that the newest always is best. If your first pick does not behave, try some of the other releases. Never install an unsupported release, though.
http://en.wikipedia.org/wiki/List_of...rsion_timeline

The fastest way of getting an ISO is through a torrent, but you can also download them from here:
https://launchpad.net/ubuntu/+cdmirrors

Another - and often better - solution is trying one of the other members of the family:
Xubuntu Lubuntu Kubuntu Ubuntu


In most cases there are workarounds for the missing hardware support, first of all the boot options mentioned above, but that is outside the scope of this guide. As a first step, ask our friend Google.

If you tried a 64 bit version without luck, give the 32 bit a try.

Ubuntu used to be a light operative system, but the latest releases are heavy and put quite a demand on the graphics card. Best is to try one of the lighter distros:
http://ubuntuforums.org/showthread.php?t=1582027
Especially Lubuntu and Puppy are good candidates.

Some people skip this point and cling to the newest release (and to Ubuntu) demanding it to work, no matter what, simply because it is the newest. This means asking for problems.

Remember that the release of a new version of Buntu (or Windows or Mac OS) has nothing to do with passing of a certain quality test. On the contrary, the system is released as good as it gets at a date decided upon many months before. Before wasting too long time beating the newest release to obedience, consider staying half a year more with the old one.

If that does not work:


3 - Is there a hardware problem on the machine?

Bad memory blocks can give a lot of strange symptoms. When booting a live Buntu, one gets the option of testing the memory. The test runs automatically, but it might take all night.

If the test indicates errors, best is to take out the RAM sticks one by one and repeat the test to isolate the error. Beware of static electricity when doing this.


Problems with keyboard and / or mice freezing are sometimes related to the BIOS. Check that you are using the newest BIOS release.


If you have the slightest doubt of the conditions of the hard drive(s), best is to erase everything with Killdisk before installing.
http://www.killdisk.com/

Just burn the Killdisk ISO to a CD (like with Buntu) and boot from it.

When you are adding a used disk to the system, you should always clean it first, especially if it has been used in RAID.

If Killdisk does not run, it is likely that the hard drive has physical errors and should not be used.


If that does not work:


4 - Ask the forum

If the machine still does not boot a live Buntu, it is time for posting a question in the relevant forum. Remember to write everything you know of the hardware and describe thoroughly the attempts you have done. You could also try a live boot of Knoppix, Puppy or other Linux distros for comparison.

If you are posting for the first time, take a look at this:
http://ubuntuforums.org/showthread.php?t=1422475



Assuming that a live boot works now:
After these steps we know that the desired version of Buntu works on the hardware in question when booted in a live environment, but the attempted upgrade did not. This gives us two options: Trying to fix the problem(s) or installing a new Buntu from scratch.

It is not possible to give advice on solving specific problems in this general guide. However, if one decides to do a clean install, these are the steps:


5 - Back up important files.

The /home directory contains user files. They must be copied to a safe location, for example a USB drive.

/home also contains hidden configuration files and directories, indicated by a name beginning with a . (dot). Also these should be copied to the backup drive. With control + h, most file managers will show hidden files.

In addition to this it is wise to back up /etc/X11/xorg.conf, if the file is present.

Note: If /home sits on its own partition, it is strictly speaking not necessary to back up any of its files since it is possible to delete only the other partitions and keep this one. Nevertheless, a backup is always a good precaution against Murphys Law.

If you can, best is to physically remove the backup drive from the system before proceeding.


6 - Create space for the new installation.

If you don't want to keep anything from the hard drive, just skip to the next step and let Ubuntu wipe the entire drive during installation.

If the machine has one or more operative systems next to Buntu (for example Windows), and if you want to keep it/them, boot the live CD again. Open the program Gparted and delete only the Buntu partitions.

If you have a separate /home partition and want to keep it as described above, take care when deleting!


7 - Installation.

Remove all unnecessary USB devices before installing, but keep the internet cable attached.

Boot with the Buntu version of your choice and follow the instructions on screen. If a question does not make sense to you, just follow the defaults.

If you have a separate /home partition, check that you have not selected it to be formatted during install.

If the normal ISO gives trouble during installation, the first step is trying the alternate (text-based) ISO in stead. The finished system will be the same, the only difference is that the installation process itself has another look and feel.

After a boot, Buntu will ask for permission to download and install bugfixes. Approve everything here, but don't install closed-source graphics drivers, even if Buntu suggests this. Only after a thorough testing and a number of reboots with open-source drivers, confirming that everything works, you can experiment with closed-source. The reason behind this is that closed-source drivers sometimes break the system, so best is to isolate this kind of error.


8 - User files

Now the new system is ready for use, and it is time to copy the user files back to the /home/<username> location. Keep the config files on the backup drive but don't use them unless you are absolutely sure what you are doing.



Now you should have a working installation. I hope you also had fun in the process and learned something.


Happy hacking
Mörgæs





Well, I get your point, but I have installed so many applications on my system that a clean install is basically out of the question.

This goes around a lot in the fora. I believe that the wording ought to be "I have installed so many applications on my system that an online upgrade is basically out of the question". Here is why:


A) The more modified a system is, the more you can assume that an upgrade of this particular system has not been tested by the developers.

One of the blessings of free and open source software is the abundance of available applications. By all means give them a test, but remember that this moves your system further towards one-of-a-kind.

If one of these applications does not run in the new Buntu release or if the upgrade of this particular application has not been thoroughly tested, the whole process could fail.

A customisation does not need to be very exotic to disturb the upgrade. Changing drivers for the graphics card or adding a personal package archive to the Software Sources might be enough.


B) There can be many good reasons for leaving an old application and switching to something different.

Default apps are not switched 'just because'. Before changing apps a long debate is going on in the community, and all arguments pro and contra have been considered. In stead of complaining that a particular app is no longer installed by default it might be worthwhile to give the successor a chance to prove its worth.


C) Are all your applications actually needed, or are they just there because you installed them once and forgot about them? For people like me who end up with a lot of unneeded applications on the system over time ('they might come in handy some day' - but seldom do), it is actually good to begin from scratch and actively select the applications rather than bringing them along to another version. If you need a list to remember what was installed in your old system, it is a sure sign that you had too much.




If you in spite of this want to keep exactly the same packages in the new Ubuntu installation, there is an alternative to the online upgrade. Running the command

dpkg --get-selections > installed-software

gives a text file with all installed packages on the system. If you run this command on the old system, you will have the option of running

 dpkg --set-selections < installed-software

on the new system after a clean install and get the same selection of packages. Thanks to bcscomp for this suggestion.


If you want to make a complete back-up of both applications and settings before experimenting (and an online upgrade is indeed experimenting), here is some advice:
http://ubuntuforums.org/showpost.php...77&postcount=4




So... maybe I should have done a clean install, but before I flush the machine, is there one last thing I could try to get it running?

Yes, there are some:

1) Boot the machine (into recovery mode, if necessary) and run

sudo apt-get clean
sudo apt-get update
sudo apt-get upgrade

Read carefully the error messages, if any. The solution might be explained here.


2) Rebuild your /etc/apt/sources.list

Make a backup copy of the file mentioned above and build a new one using
http://repogen.simplylinux.ch/index.php

Select all branches, updates and third-party repositories that may have been on the system. After applying the new sources.list, run again the three apt-commands above.

Thanks to artoonie for this idea.

Enabling the "proposed" repository will give you access to more bug fixes, but they are in an experimental stage. It could solve the problem, but it could also create another one. Be careful here.


3) Boot into an older kernel.
In the boot proces you might see a list of available kernels. Try going through them step by step and test if one works.

If the list does not appear by itself, pressing left-shift early in the boot will show it, provided you have the Grub 2 boot loader. If your initial install was Ubuntu 9.10 or later, you have Grub 2 - if it was older than 9.10, it is most definitely time for a reinstall.


4) If you can boot into a command prompt but not the graphical environment, you could try the command startx.


5) Adding boot options as described earlier in this post is also worth trying.

[YSK]

I had just upgrade the new version of ubuntu and found that some of the usual.

1. Auto hide launcher could auto hide the launcher, but cannot show back after we point the mouse to the position we selected( neither left nor top left).

2. Some of my installed software gone and I need to reinstall them back....

3. Firefox history been cleared.

Please kindly consider at future patches or upgrades.

Best regards
YSK

[user_linux08]

One element which was not addressed in more details, is the /home directory in its own partition, which is the way I have been doing since early versions of ubuntu.

In addition to the fact, personal data is more secured against unintended deletion (due to upgrades, etc.)

I like to emphasis that, if you do go this path. it is paramount to make absolutely sure during the installation, to select the existing /home directory and let the system know, this is the /home directory, and not the default one. it is also important NOT click the FORMAT box.

Hope it helps

[jadtech]

great guide !!

hope many will take time to check it out before they upgrade

[IPEX-731BA5DD06]

Great Guide, I can only add my own experiences.

1) Separate Home Partition - This should be MANDATORY .... Safe guarding data , simplicity etc.
- Notes on this
a) Do select you home partition at INSTILLATION as you default /home partition.
b) DON'T select it to be formatted. (yes done that)
c) Separate partition for operating system, select / as root for that partition.
d) Pyscho cat has a selection of EXCELLENT tutorials on
i) Creating a separate home partition UPON instillation.
ii) Creating a separate home partition AFTER installation.
iii) Various other tutorials of other topics.

2) Try to figure out why, what, where who when has gone wrong, don't and issue ultimatums of leaving Ubuntu to go back to windooze !!!!!1 (I say good riddance).

3) Search this forum and Internet search. ( I've found some solutions while searching other's), processor.nocst=1
for P4 processor systems on linux 3.0.0-12 -> 17 solves the kernel panic issue and allows use of dual core processors.

4) Remember the software is free, the only cost is your time and effort (oh hardware if your too foolish, not yet but trying).

5) Try put back at least twice what you take out, if you find a solution to a hardware issue (HP laserjet 1300, use Guetenburg print setting, 4th on list) is an example of what I've found out playing with settings on my own. Cost 10 pages printed and 1 hr of time.

Foolish thing I've done ;

1) Creating a new user Name, and complain that Firefox loses bookmarks, installed programs are missing etc, even though using same separate home partition. IPEX-...doesn't equal ipex-... or brian for that matter.
2) formatting separate home partition, (Brain explosion that day)
3) Used usb 2.0 Connection for upgrade (OMF'n!!!! its sooo slow.....compared to CD)
4) Deleted ALL kernels and wondered why it wont' boot
5) Posted my errors here for all to SEEE!!!!!!

[YSK]

Indeed I just click on the upgrade on the software updater, not redownload and format install of it. my personal data is save. Just some of the program just needed to be install again.

Thanks for any concern.

BTW: Before this update(1204) the auto hide launcher function good but now new version become not functioning?

[Hexxus]

Great Guide, I can only add my own experiences.

1) Separate Home Partition - This should be MANDATORY .... Safe guarding data , simplicity etc.
- Notes on this
a) Do select you home partition at INSTILLATION as you default /home partition.
b) DON'T select it to be formatted. (yes done that)
c) Separate partition for operating system, select / as root for that partition.
d) Pyscho cat has a selection of EXCELLENT tutorials on
i) Creating a separate home partition UPON instillation.
ii) Creating a separate home partition AFTER installation.
iii) Various other tutorials of other topics.

2) Try to figure out why, what, where who when has gone wrong, don't and issue ultimatums of leaving Ubuntu to go back to windooze !!!!!1 (I say good riddance).

3) Search this forum and Internet search. ( I've found some solutions while searching other's), processor.nocst=1
for P4 processor systems on linux 3.0.0-12 -> 17 solves the kernel panic issue and allows use of dual core processors.

4) Remember the software is free, the only cost is your time and effort (oh hardware if your too foolish, not yet but trying).

5) Try put back at least twice what you take out, if you find a solution to a hardware issue (HP laserjet 1300, use Guetenburg print setting, 4th on list) is an example of what I've found out playing with settings on my own. Cost 10 pages printed and 1 hr of time.

Foolish thing I've done ;

1) Creating a new user Name, and complain that Firefox loses bookmarks, installed programs are missing etc, even though using same separate home partition. IPEX-...doesn't equal ipex-... or brian for that matter.
2) formatting separate home partition, (Brain explosion that day)
3) Used usb 2.0 Connection for upgrade (OMF'n!!!! its sooo slow.....compared to CD)
4) Deleted ALL kernels and wondered why it wont' boot
5) Posted my errors here for all to SEEE!!!!!!

Hello there, I've searched for a little while looking for psycho cat's guide but I didn't see it. You wouldn't have a linky handy by any chance would you?

Thanks!

[directhex]

some Mono-based applications like Tomboy and F-spot were replaced with true open source alternatives. Let's hope we can put the old ones to rest.

I'd expect a forum moderator to understand what Open Source is.

[aditya3098]

There is also the manual approach I used:

Change the sources to the next version i.e:

deb http://archive.ubuntu.com/ubuntu oneiric universe

becomes:

deb http://archive.ubuntu.com/ubuntu precise universe

Become root (sudo su) on tty1 (ctrl-alt-f1) . Then run the following commands multiple times in the same order until the all of them show that the distro is up to date and dpkg --configure -a has no output:

apt-get update
apt-get upgrade
dpkg --configure -a
apt-get dist-update
dpkg --configure -a

Finnaly reboot with:

reboot

and use the new distro

[mörgæs]

There is also the manual approach I used:

Change the sources to the next version i.e:

deb http://archive.ubuntu.com/ubuntu oneiric universe

becomes:

deb http://archive.ubuntu.com/ubuntu precise universe

Become root (sudo su) on tty1 (ctrl-alt-f1) . Then run the following commands multiple times in the same order until the all of them show that the distro is up to date and dpkg --configure -a has no output:

apt-get update
apt-get upgrade
dpkg --configure -a
apt-get dist-update
dpkg --configure -a

Finnaly reboot with:

reboot

and use the new distro

It might work and if it doesn't you know what to try in stead.

I recommend using sudo and not su:
https://help.ubuntu.com/community/RootSudo