Search:

Type: Posts; User: rune.evjen; Keyword(s):

Search: Search took 0.00 seconds.

  1. Re: SOLVED: lirc trouble: multiple devices (in my case lirc_imon and Commandir II)

    My working setup:
    lirc0.conf


    # Please make this file available to others
    # by sending it to <lirc@bartelmus.de>
    #
    # this config file was automatically generated
    # using lirc-0.8.4(default)...
  2. SOLVED: lirc trouble: multiple devices (in my case lirc_imon and Commandir II)

    After getting support from the commandir vendor, I added the following to /etc/modprobe.d/blacklist.conf:


    blacklist commandir
    blacklist lirc_cmdir

    This solved the problem with my commandir...
  3. Re: lirc trouble: multiple devices (in my case lirc_imon and Commandir II)

    I realize answering myself twice seems strange, but anyway:

    Ater testing som more and googling I came along this post:

    I then tested manually using these commands:

    sudo /usr/sbin/lircd...
  4. Re: lirc trouble: multiple devices (in my case lirc_imon and Commandir II)

    After reviewing my lirc processes, I adjusted my /etc/lirc/hardware.conf to the following:


    # /etc/lirc/hardware.conf
    #
    #Chosen Remote Control
    REMOTE="CommandIR Multi-IR Transceiver...
  5. SOLVED: lirc trouble: multiple devices (in my case lirc_imon and Commandir II)

    Note: This problem is now solved, see last post in thread

    Hardware setup:

    - lsusb excerpt:
    Bus 002 Device 003: ID 10c4:0003 Cygnal Integrated Products, Inc.
    Bus 003 Device 002: ID 15c2:0038...
  6. [ubuntu] Re: Need help with Terratec Cinergy C PCI (DVB-C)

    As a reply to the previous (my own) post,

    compiling and using mantis with amd64 works fine.

    The error messages I got was because I tried to unload and load modules without rebooting.

    After a...
  7. [ubuntu] Re: Need help with Terratec Cinergy C PCI (DVB-C)

    I have a Terratec Cinergy C PCI (lspci verifies that this card is the same as described in http://www.linuxtv.org/wiki/index.php/TerraTec_Cinergy_C_DVB-C)

    I compiled the latest mantis drivers from...
  8. Re: Problem with Mythbuntu 8.0.4.1 -no channels

    Hi! I had the same problem after upgrading from 8.04 to 8.04.1 (or somewhere between that).

    I use a Technotrend Premium DVB-C 2300, and scanning gave no results, neither did w_scan.

    I checked...
  9. Suspend-to-ram (S3) of mythbuntu-diskless client

    I have been trying to get my diskless client to suspend (S3 mode), but the client stops in the suspend process with a blinking cursor.

    I am using an Acer L250 media center computer

    I also...
  10. Re: Partial lock on all channels after update

    I found that when upgrading the kernel from 2.6.24-16-generic to 2.6.24-18-generic I could not get a lock on any encrypted channel.

    Booting the -16 kernel solved this issue. I have not had time to...
  11. Preferred solution: DVI-HDMI or VGA to 42" Plasma TV ?

    I have a Mythbuntu setup on an ACER L250 Media Center PC with a PVR-500 card and an integrated ATI card.

    This card supports both VGA and DVI output.

    I want to connect this to a Panasonic Plasma...
Results 1 to 11 of 11