Search:

Same here. Samba was crashing my network connection on ubuntu 12.04

Changing the smb.conf file as above did it
Thanks

Success!!!!

I had to add one more line. Due to this message after 'make install' code:

NOTE: Windows driver configuration file format has changed since 1.5. You must re-install Windows drivers...

Chili 555, thanks so much for your help.


The driver should be XP. It was downloaded from this thread.


I will be upgrading to 12.04 in a little over a month, but I usually do my upgrades...

Hi thanks for getting back.

lsusb:


Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID...

Hi there I have followed these instructions and now I have achieved this:

woody@captain-coach:~$ ndiswrapper -l
bcmwlhigh5 : driver installed
device (0846:9020) present

But I don't know how...

Thanks for the suggestion. It didn't work, unfortunately.

Hi thanks for the response




There is no output. The command simply opens another file browser window.

To give a little more background:

Until recently, nautilus was not working at all...

I have the same problem, and the above does not fix. I can open volumes on my desktop, and navigate to anywhere in the file browser once it is open, but I cannot open anything in the "places" menu. I...

I should not need this spelled out for me, sorry. For others who are getting this problem and if typing "nautilus &" in the terminal restores your folders and right-clicks...
...

I don't know if I'm missing something in this thread and others covering similar issues, but the 'big picture' problem (quoted above) still seems unsolved.

I have had this same problem for a few...

The solution posted here:

http://ubuntuforums.org/showpost.php?p=2776815&postcount=1

by bishop9226 worked for me.

Thanks for this post. Very helpful. This is the most annoying feature of Lucid and this is a far better fix than is suggested in other posts; which is to save the keyring password as blank.

Ok I have just about run out of options, and I'm thinking maybe there is something wrong with my hardware (??) when it comes to running a persistent live Jaunty USB.

I have tried everything...

I made a hardy heron startup disk no problem, but when I try to get persistent mode working (as per above instructions) I get a disk I/O error in FD0 and I drop back to a shell prompt. Any ideas?
...

Hi Amoun,

Thanks for posting. I had just about given up on photo-editing in Ubuntu. I upgraded to 9.04, but this has not changed the situation. Are you saying you have the same bad colour/tone...

OK I figured it out. Way down at the far end of alsa mixer, which I opened using this command:

alsamixer -Dhw

I found a "mic booster" channel. As soon as I dropped the fader on this channel,...

Hi JolinB. THanks for posting on this. I have a very similar problem. I am using pulseaudio server on Intrepid (8.10). I have also followed the howto you mentioned.

The source of the noise in my...

Sorry was that last post about fixing the background noise problem? I have had the problem for a while and have just been too busy to fix it. I am using pulse audio sound server on Intrepid. Bad...

Thanks to all. I have tried all suggestions, and the only positive step I have made is that most have the same results. UFRaw (stand alone vers 0.13, from repositories), Raw Therapee (vers 2.3 from...

Hello again and sorry for the late reply (life!)

[QUOTE=RichardCL;6866188]Hi,

My setup is working fine I'm using the following setup:

EOS 40D saving in RAW +L
Colour map in camera: sRGB
...

Hi thanks for reply.

skao:

I completely removed UFR 0.13 and installed 0.15 deb package. This did improve the results, but the images are still unusable. They are now underexposed and 'green'...

I couldn't find anything to do with "Format." There is a settings button with a "log" tab. This contained a (possibly) insightful piece of infromation:


ufraw_open: w:4312 h:2876 curvesize:0...

I have major problem with UFRaw and my new Canon EOs 450D (Rebel Xsi in some countries). I installed UFR from repositories no problem (started with the GIMP plugin, then tried stand alone). .CR2...

I have major problem with UFRaw and my new Canon EOs 450D (Rebel Xsi in some countries). I installed UFR from repositories no problem (started with the GIMP plugin, then tried stand alone). .CR2...

Great work! I was stumped by this problem for a while. Thanks for the post.