Re: HOWTO: VinDSL Conky Script
Hi skorlowsky
Please take a look in your .conkyrc file and make sure you have these two settings!
max_specials 600
text_buffer_size 4000
Anything below these values will/may cause display problems.
please write back if you still have problems
Merry Christmas Sean :-)
Re: HOWTO: VinDSL Conky Script
Quote:
Originally Posted by
foodoo
Please take a look in your .conkyrc file and make sure you have these two settings!
max_specials 600
text_buffer_size 4000 [ *Or more! ~VinDSL ]
Anything below these values will/may cause display problems[...]
Very good, foodoo!
I just wanted to see if anyone spotted this very common Conky "problem". ;)
The above settings are paramount to Conky et al. not just my script.
Allow me to present a small demonstration of their importance...
I made a new theme last night. I was freezing (I'm a "desert rat") and wanted to look at something warm n' fuzzy.
Conky was displaying fine, but as a negative example (of what NOT to do), let's lower "max_specials" to Conky's default value (512).
Oops! Where did Conky go?!?!? Hint: Look at the last line in the dialog.
Let's revert the "max_specials" setting back to "600".
But, this time, let's lower the "text_buffer size" to "3072".
Conky's default value is (256). Hello?!?!?
Errors up the ying-yang and the Conky display is starting to truncate...
BTW, I almost always raise n' lower this setting in multiples of "256". What I do is:
- Lower the "text_buffer size" until Conky output gets janky
- Raise the size until I'm NOT getting errors in CLI / display output
- Give the value an extra "256" for good measure
Anyway, let's go back to the original settings:
max_specials 600
text_buffer_size 4352
Bingo! No errors, and everything displays correctly!
It's time for a cig, and a cocktail, with Betty (Mad Men)... LoL! :D
Re: HOWTO: VinDSL Conky Script
Quote:
Originally Posted by
VinDSL
... Errors up the ying-yang and the Conky display is starting to truncate...
One should always be wary of over extending one's ying-yang.
Anyone else find '50s style fashions hot?
Re: HOWTO: VinDSL Conky Script
Hi Vin,
Thanks for the nice comment and the very good example!
I could see it the moment i saw skorlowsky's comment for help, i've seen this problem popping up in the forum quite a few times now so its important that these two settings need to be strongly expressed to everyone.
Betty looks lovely i would love to have a date with her!
Clever picture :-)
Merry Christmas Sean
1 Attachment(s)
Re: HOWTO: VinDSL Conky Script
Hi, i recently applied the latest conky script on my ubuntu 12.04 and have come up with following problems:
1) It's not showing even though i have added it as my startup application
2) It is not showing the bargraph (Screenshot attached)
3) It is not displayed as part of my desktop.(Sometime i can do Alt + Tab it with other process
4) When iam starting conky manually iam getting following errors:
================================================== ===============
jackal@Treadstone:~$ Conky: llua_load: cannot open /home/jackal/.conky/bargraph_testing.lua: No such file or directory
sh: 1: nvidia-smi: not found
sh: 1: nvidia-smi: not found
Conky: desktop window (1a00045) is subwindow of root window (be)
Conky: window type - normal
Conky: drawing to created window (0x4400002)
Conky: drawing to double buffer
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
sh: 1: /usr/share/conkywx/conkywx.sh: not found
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
^C
jackal@Treadstone:~$ Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call a nil value
Conky: llua_do_call: function conky_main_bars execution failed: attempt to call
================================================
My conky script attached.Can someone advice?
Conky Script:
=============================
###############################################
## VinDSL | rev. 12-11-19 11:55 | ver. 0.7.9 ##
###############################################
## November 2012 Series ##
###############################################
## ¡PLEASE READ THE FINE PRINT! ##
####
## Development Platforms (current)
#
# Ubuntu 10.10 'Maverick Meerkat' (GNOME 2.28 - Conky 1.8.0-1)
# Ubuntu 13.04 'Raring Ringtail' (GNOME-SHELL - UNITY - LXDE - Conky 1.9.0-2)
# Screen Resolution: 1280x1024x24 (DELL UltraSharp 1907FP)
#
## Tips n' Tricks: conky 1.8.1 will no longer be supported. RIP :)
####
## Prerequisites (required)
#
# conky-all 1.8.0-1 or 1.9.0-2
# Conkywx 0.7.9 (Paramvir Likhari)
# UTF-8 Compatible Text Editor
####
## Installed fonts (required)
#
# Arrows (JLH Fonts - not included in link below)
# ConkyWeather (Stanko Metodiev)
# Cut Outs for 3D FX (Fonts & Things)
# Droid Font Family (Google Android SDK)
# KR A Round (Kat's Fun Fonts)
# Moon Phases (Curtis Clark)
# OpenLogos (Icoma)
# PizzaDude Bullets (Jakob Fischer)
# Radio Space (Iconian Fonts)
# StyleBats (Vinterstille)
# Ubuntu Font Family (Canonical Ltd)
# Ubuntu Title Bold (Paulo Silva - not included in link below)
# Weather (Jonathan Macagba)
#
## Tips n' Tricks from: Mr. Peachy, djyoung4, and 42dorian (Thanks!)
## Most necessary fonts can be downloaded here: http://ompldr.org/vOHdoag
## Unzip the fonts into your font folder, for example: /home/username/.fonts
## Run this command in a terminal (rebuilds font cache file): sudo fc-cache -fv
####
## Use XFT? Required to Force UTF8 (see below)
#
use_xft yes
xftfont DroidSans:size=8.75
xftalpha 0.1
####
## Force UTF8? Requires XFT (see above)
## Displays degree symbol, instead of °, etc.
#
override_utf8_locale yes
####
## This buffer is used for single lines, text, output from $exec, and other variables.
## Increasing the 'text_buffer_size' (too high) will drastically reduce Conky's performance.
## Decreasing the buffer size (too low) will truncate content and cause strange display output.
## Standard text buffer size is 256 bytes (cannot be less). Adjust YOUR buffer wisely!
## Tips n' Tricks from dk75:"You don't need to create a 12KiB buffer for every Conky config line."
#
text_buffer_size 4352
####
## Maximum number of special things, e.g. fonts, offsets, aligns, etc. (default is 512)
## Tips n' Tricks from: sparker256 (Thanks, Bill!)
#
max_specials 600
####
## Daemonize Conky, aka 'fork to background'.
#
background yes
####
## Update interval in seconds.
#
update_interval 2.0
####
## The number of times Conky will update before quitting.
## Zero makes Conky run forever.
#
total_run_times 0
####
## Create 'own_window' type. Makes Conky behave like other panels.
#
own_window yes
own_window_transparent yes
own_window_type normal
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
####
## Some distros require the following lines for true transparency.
## BOTH of these lines need to be Commented/Uncommented in tandem.
#
own_window_argb_visual yes
own_window_argb_value 255
####
## Force images to redraw when they change.
#
imlib_cache_size 1
####
## Use double buffering? Reduces flicker.
#
double_buffer yes
####
## Draw shades?
#
draw_shades yes
default_shade_color 330
####
## Draw outlines?
#
draw_outline no
####
## Draw borders around text?
#
draw_borders no
####
## Draw borders around graphs?
#
draw_graph_borders no
####
## Print text to stdout?
## Print text in console?
#
out_to_ncurses no
out_to_console no
####
## Text alignment.
#
alignment top_right
####
## Minimum size of the text area.
## Syntax: minimum_size [width] [height]
#
minimum_size 245 1394
####
## Maximum width of the text area.
## Syntax: maximum_width [width]
#
maximum_width 245
####
## Gap between text and screen borders.
#
gap_x 6 # Left/Right
gap_y 32 # Top/Bottom
####
## Shorten MiB/GiB to M/G in stats.
#
short_units yes
####
## Pad % symbol spacing after numbers.
#
pad_percents 0
####
## Pad spacing between text and borders.
#
border_inner_margin 4
####
## Limit the length of names in "Top Processes".
#
top_name_width 10
####
## Subtract file system -/+buffers/cache from used memory?
## Set to yes, to produce meaningful physical memory stats.
#
no_buffers yes
####
## Set to yes, if you want all text to be in UPPERCASE.
#
uppercase no
####
## Number of cpu samples to average.
## Set to 1 to disable averaging.
#
cpu_avg_samples 2
####
## Number of net samples to average.
## Set to 1 to disable averaging.
#
net_avg_samples 2
####
## Add spaces to keep things from moving around?
## Only affects certain objects.
#
use_spacer right
####
## My colors (suit yourself)
#
color0 White #FFFFFF
color1 Ivory #FFFFF0
color2 Ivory2 #EEEEE0
color3 Ivory3 #CDCDC1
color4 Tan1 #FFA54F
color5 Tan2 #EE9A49
color6 Gray #7E7E7E
color7 AntiqueWhite4 #8B8378
color8 DimGray #696969
color9 Tomato #FF6347
# colorX OrangeRed #FF4500
#####
## Load Lua for shading (optional)
## Set the path to your script here.
#
lua_load ~/.conky/draw_bg.lua
lua_draw_hook_pre draw_bg
####
## Load Lua for bargraphs (required)
## Set the path to your script here.
#
# lua_load ~/.conky/bargraph_small.lua
lua_load ~/.conky/bargraph_testing.lua
lua_draw_hook_post main_bars
####
## Define the locations of Conkywx files (required)
## Set the path to your .confs and templates here.
#
template0 "/usr/share/conkywx/conkywx.sh"
template1 "/home/vindsl/.config/conkywx/vindsl-imperial-conkywx.conf"
template2 "/home/vindsl/.config/conkywx/vindsl-metric-conkywx.conf"
template3 "/home/vindsl/.config/conkywx/wx-wu-vindsl-imperial-weather-dingbat-template.sh"
template4 "/home/vindsl/.config/conkywx/wx-wu-vindsl-imperial-weather-graphic-template.sh"
template5 "/home/vindsl/.config/conkywx/wx-wu-vindsl-metric-weather-dingbat-template.sh"
template6 "/home/vindsl/.config/conkywx/wx-wu-vindsl-metric-weather-graphic-template.sh"
TEXT
##################################
## LOGO ##
##################################
## Uncomment for hard-coded ID (static)
# ${voffset -33}${font OpenLogos:size=103}${color2}v${font}${voffset -75}${goto 179}${font UbuntuTitleBold:size=19.6}${color4}1${offset 1}2${offset 1}.${offset 0}0${offset 0}4${font}
####
## Uncomment for soft-coded ID (dynamic)
# ${voffset -30}${font OpenLogos:size=103}${color2}v${font}${voffset -75}${goto 179}${font UbuntuTitleBold:size=19.6}${color4}${pre_exec cat /etc/*release | grep 'RELEASE' | awk -F'=' '{print $2}'}${font}
####
## Additional ID (branch version, code name, release date, etc.)
# ${voffset -2}${goto 181}${font Ubuntu-B:bold:size=7.55}${color5}Conky ${conky_version}${font}
# ${voffset 0}${goto 181}${font Ubuntu-B:size=8}${color4}Pre-Alpha${font}
####
## Uncomment to display YOUR custom graphic image (upper-right corner)
${voffset -30}${font OpenLogos:size=103}${color2}v${font}${voffset -52}${image /home/vindsl/Pictures/BDC/Avatar(Transparent)55x55.png -p 180,0 -s 52x52 -n}
##################################
## SYSTEM ##
##################################
${voffset 7}${font DroidSans:bold:size=8.25}${color4}SYSTEM${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font OpenLogos:size=10}${color2}u${voffset -4}${font DroidSans:size=8.6}${color3}${offset 5}${pre_exec lsb_release -sd | sed -e 's/development/dev/g'}${alignr}${pre_exec lsb_release -sr}${font}
${voffset 2}${offset -2}${font OpenLogos:size=12}${color2}Z${voffset -4}${font DroidSans:size=8.6}${color3}${offset 3}${sysname}${offset 3}${kernel}${alignr}${font DroidSans:size=8.3}${machine}${font}
####
## Uncomment for nVidia ID (nvidia-smi version - dynamic)
${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.6}${color3}${offset 5}${pre_exec nvidia-smi -q | grep "Product Name" | sed -e 's/.*: /nVidia /'}${alignr}${pre_exec nvidia-smi -q | grep "Driver Version" | awk '{print $4}'}${font}
####
## Uncomment for 'nvidia-current' driver ID (DPKG version - hybrid)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.6}${color3}${offset 5}nVidia GeForce 7600 GT${alignr}${font DroidSans:size=8.3}${pre_exec dpkg --status nvidia-current | grep Version | cut -f 1 -d '-' | sed 's/[^.,0-9]//g'}${font}
####
## Uncomment for nvidia driver ID (OpenGL version - hydrid)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.6}${color3}${offset 5}nVidia GeForce 7600 GT${alignr}${font DroidSans:size=8.3}${pre_exec glxinfo | grep 'OpenGL version string' | sed -e 's/OpenGL.*: //' | cut -c '14-19'}${font}
####
## Uncomment for hard-coded video ID (any card / any driver - static)
# ${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.6}${color3}${offset 5}Video Card Product Name${alignr}Driver Version${font DroidSans:size=8.3}${font}
####
## Uncomment for CPU ID / CPU frequency (hybrid)
${voffset 2}${font StyleBats:size=10}${color2}A${voffset -1}${font DroidSans:size=8.6}${color3}${offset 5}Intel${offset 3}P4${offset 3}Extreme${offset 3}Edition${alignr 1}${font DroidSans:size=8.3}${freq_g cpu0}${offset 1}GHz${font}
####
## Uncomment for System Uptime (hybdid)
${voffset 2}${font StyleBats:size=10}${color2}q${voffset -1}${font DroidSans:size=8.6}${color3}${offset 5}System${offset 3}Uptime${alignr}${font DroidSans:size=8.3}${uptime_short}${font}
##################################
## PROCESSORS ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}PROCESSORS${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU1${offset 5}${font DroidSans:size=8.3}${cpu cpu1}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu2}%${font}
##################################
## MEMORY ##
##################################
${voffset 5}${font DroidSans:bold:size=8}${color4}MEMORY${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 6}${font StyleBats:size=10}${color2}l${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 3}RAM${goto 97}${font DroidSans:size=8.3}${mem}${goto 133}/${offset 5}${memmax}${alignr}${memperc}%${font}
##################################
## HDD ##
##################################
${voffset 15}${font DroidSans:bold:size=8}${color4}HDD${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 7}${font StyleBats:size=9.9}${color2}x${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 4}ROOT${goto 95}${font DroidSans:size=8.3}${fs_used /}${goto 133}/${offset 5}${fs_size /}${alignr}${fs_free_perc /}%${font}
${voffset 16}${font StyleBats:size=9.9}${color2}x${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 4}HOME${goto 95}${font DroidSans:size=8.3}${fs_used /home}${goto 133}/${offset 5}${fs_size /home}${alignr}${fs_free_perc /home}%${font}
${voffset 16}${font StyleBats:size=9.9}${color2}4${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 4}SWAP${goto 95}${font DroidSans:size=8.3}${swap}${goto 133}/${offset 5}${swapmax}${alignr}${swapperc}%${font}
##################################
## TOP PROCESSES ##
##################################
${voffset 15}${font DroidSans:bold:size=8}${color4}TOP PROCESSES${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 6}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 1}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 1}${alignr}${top_mem mem 1}%${font}
${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 2}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 2}${alignr}${top_mem mem 2}%${font}
${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 3}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 3}${alignr}${top_mem mem 3}%${font}
# ${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 4}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 4}${alignr}${top_mem mem 4}%${font}
# ${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 5}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 5}${alignr}${top_mem mem 5}%${font}
# ${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 6}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 6}${alignr}${top_mem mem 6}%${font}
##################################
## NETWORK ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}NETWORK${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}T${font DroidSans:size=8.65}${color3}${offset 5}Download${goto 120}${font DroidSans:size=8.3}${totaldown eth0}${alignr}${font DroidSans:size=8.3}${downspeed eth0}${font}
${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}N${font DroidSans:size=8.65}${color3}${offset 5}Upload${goto 120}${font DroidSans:size=8.3}${totalup eth0}${alignr}${font DroidSans:size=8.3}${upspeed eth0}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Private${offset 3}IP${goto 123}${font DroidSansFallback:size=8.5}LAN${alignr}${font DroidSans:size=8.3}${addr eth0}${font}
${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Public${offset 7}IP${goto 121}${font DroidSansFallback:size=8.5}WAN${alignr}${font DroidSans:size=8.3}${execi 1800 wget -q -O - checkip.dyndns.org | sed -e 's/[^[:digit:]\|.]//g'}${font}
##################################
## CONKYWX WEATHER ##
##################################
${voffset 4}${font DroidSans:bold:size=8.25}${color4}CONKYWX${offset 8}${color6}${voffset -2}${hr 1}${font}
####
## Uncomment for IMPERIAL Weather Stats (DINGBAT font set).
# ${execpi 900 ${template0} -c "${template1}" -t "${template3}"}${font}
####
## Uncomment for IMPERIAL Weather Stats (GRAPHIC icon set).
${execpi 900 ${template0} -c "${template1}" -t "${template4}"}${font}
####
## Uncomment for METRIC Weather Stats (DINGBAT font set).
# ${execpi 900 ${template0} -c "${template2}" -t "${template5}"}${font}
####
## Uncomment for Metric Weather Stats (GRAPHIC icon set).
# ${execpi 900 ${template0} -c "${template2}" -t "${template6}"}${font}
##################################
## TIME ##
##################################
${voffset 6}${font DroidSans:bold:size=8}${color4}TIME${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset -5}${font RadioSpace:size=32}${color3}${if_match ${time %l}<=9}${alignc 7}${time %l:%M}${offset 3}${time %p}${else}${if_match ${time %l}>=10}${alignc -1}${time %l:%M}${offset 3}${time %p}${endif}${endif}${font}
##################################
## CALENDAR ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}DATE${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 18}${font DroidSansMono:size=7.55}${color2}${alignc 60}${time %A}${font}
${voffset -4}${font DroidSansFallback:bold:size=18}${if_match ${time %e}<=9}${color3}${alignc 65}${time %e}${font}${else}${if_match ${time %e}>=10}${color3}${alignc 60}${time %e}${endif}${endif}${font}
${voffset 0}${font DroidSansMono:size=7.55}${color2}${alignc 60}${time %B}${font}
${voffset 0}${font DroidSansMono:size=7.6}${color2}${alignc 60}${time %Y}${font}
${voffset -80}${font CutOutsFor3DFX:size=67}${color7}${alignc 99}2${font}
####
## Uncomment for "SUNDAY = First Day-of-the-Week" (use mono fonts only)
${voffset -70}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; cal -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color4}&${color3}/'}
####
## Uncomment for "MONDAY = First Day-of-the-Week" (use mono fonts only)
# ${voffset -68}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; ncal -M -C -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color4}&${color3}/'}
##################################
## RHYTHMBOX (Experimental) ##
##################################
${if_running rhythmbox}
${voffset -9}${font DroidSans:bold:size=8}${color4}RHYTHMBOX${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 6}${font DroidSans:size=8.25}${color3}${if_match "${execpi 2 expr length "`/usr/bin/rhythmbox-client --print-playing-format %tt | head -n 1`"}" >= "48"}${alignr 15}${scroll 38 4* ${execi 2 rhythmbox-client --print-playing-format %tt --no-start}}${font}${else}${alignc}${execi 2 rhythmbox-client --print-playing-format %tt --no-start}${font}${endif}${endif}
##################################
## BANSHEE (Experimental) ##
##################################
${if_running banshee}
${voffset -26}${font DroidSans:bold:size=8}${color4}BANSHEE${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font DroidSans:size=8.25}${color3}${if_match "${execpi 2 expr length "`/usr/bin/banshee --query-title --no-present | cut -f1- -d " "`"}" >= "48"}${alignr 15}${scroll 38 4* ${execi 2 banshee --query-title --no-present | cut -f2- -d " "}}${font}${else}${alignc}${execi 2 banshee --query-title --no-present | cut -f2- -d " "}${font}${endif}${endif}
##################################
## GUAYADEQUE (Experimental) ##
##################################
${if_running guayadeque}
${voffset -36}${font DroidSans:bold:size=8}${color4}GUAYADEQUE${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font DroidSans:size=8.25}${color3}${if_match "${execpi 2 expr length "`qdbus org.mpris.guayadeque /\Player org.freedesktop.MediaPlayer.GetMetadata | grep title | cut -f2- -d" "`"}" >= "48"}${alignr 15}${scroll 38 4* ${execi 2 qdbus org.mpris.guayadeque /\Player org.freedesktop.MediaPlayer.GetMetadata | grep title | cut -f2- -d" "}}${font}${else}${alignc}${execi 2 qdbus org.mpris.guayadeque /\Player org.freedesktop.MediaPlayer.GetMetadata | grep title | cut -f2- -d" "}${font}${endif}${endif}
================================================== ===============
Re: HOWTO: VinDSL Conky Script
Hi Jackal_79
Problem No.1)
jackal@Treadstone:~$ Conky: llua_load: cannot open /home/jackal/.conky/bargraph_testing.lua: No such file or directory!
sorry to ask but do you have the bargraph script placed in your .conky folder ?
if yes it looks like your .conkyrc is calling the wrong bargraph script,
it should be calling:
lua_load ~/.conky/bargraph_small.lua
lua_draw_hook_post main_bars
and not bargraph_testing:lua
comment out the bargraph_testing.lua
and uncomment:
lua_load ~/.conky/bargraph_small.lua
that should get rid of the "calling a nil value" problem.
Problem No.2)
sh: 1: /usr/share/conkywx/conkywx.sh: not found!
Have you actually installed conkywx ?
Problem No.3)
template0 "/usr/share/conkywx/conkywx.sh"
template1 "/home/vindsl/.config/conkywx/vindsl-imperial-conkywx.conf"
template2 "/home/vindsl/.config/conkywx/vindsl-metric-conkywx.conf"
template3 "/home/vindsl/.config/conkywx/wx-wu-vindsl-imperial-weather-dingbat-template.sh"
template4 "/home/vindsl/.config/conkywx/wx-wu-vindsl-imperial-weather-graphic-template.sh"
template5 "/home/vindsl/.config/conkywx/wx-wu-vindsl-metric-weather-dingbat-template.sh"
template6 "/home/vindsl/.config/conkywx/wx-wu-vindsl-metric-weather-graphic-template.sh"
you are using "vindsl" as your username when your actual username is not vindsl !!! you must use: /home/jackal/ blah blah
It is most important to get the path name correct in order to call the scripts and templates.
tackle these 3 problems first and then we can take a look at the nVidia smi problem and your autostart problem
i hope i was able to point you in the right direction
cheers Sean :-)
Re: HOWTO: VinDSL Conky Script
Hi VinDSL!
I am trying your conky on Raring and I am slowly getting there but, right now I am getting this error:
Conky: Unable to load image '/home/cavsfan/Pictures/BDC/Avatar(Transparent)55x55.png'
Conky: Unable to load image '/home/cavsfan/Pictures/BDC/Avatar(Transparent)55x55.png'
Conky: Unable to load image '/home/cavsfan/Pictures/BDC/Avatar(Transparent)55x55.png'
over and over again.
It's not looking too bad for me doing it :) but, is there somewhere I can get these avatars mentioned in the conky?
I am sure once I get the BDC one it will error on the next one. :confused:
I have been unable to locate them.
EDIT: Also, how would I get my 2nd two cores as I have a quad core. This is what I have and I tried duplicating the last two lines and making cpu3 and cpu4 but it didn't work so well.
Code:
##################################
## PROCESSORS ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}PROCESSORS${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU1${offset 5}${font DroidSans:size=8.3}${cpu cpu1}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu2}%${font}
Thanks!
Re: HOWTO: VinDSL Conky Script
Can someone help me how to make wireless bar looks like the rest of the bars from the picture?
http://www.dodaj.rs/t/1B/Ev/2AgkNyRB...2012-12-21.jpg
Here is my code for conky:
Code:
##################################
## filip | rev. 11-12-01 20:20 ##
##################################
## December 2011 Series ##
##################################
## ¡PLEASE READ THE FINE PRINT! ##
####
## Development Platforms (current)
#
# Ubuntu 10.10 'Maverick Meerkat' (GNOME 2.28 - Conky 1.8.0)
# Ubuntu 12.04 'Precise Pangolin' (GNOME-SHELL - UNITY 2D/3D - Conky 1.8.1)
# Screen Resolution: 1280x1024x24 (DELL UltraSharp 1907FP)
####
## Prerequisites (required)
#
# conky-all 1.8.0 or 1.8.1
# cURL - Command Line Tool
# xsltproc - Command Line Tool
# UTF-8 Compatible Text Editor
####
## Installed fonts (required)
#
# ConkyWeather (Stanko Metodiev)
# Cut Outs for 3D FX (Fonts & Things)
# Droid Font Family (Google Android SDK)
# KR A Round (Kat's Fun Fonts)
# OpenLogos (Icoma)
# PizzaDude Bullets (Jakob Fischer)
# Radio Space (Iconian Fonts)
# StyleBats (Vinterstille)
# Ubuntu Font Family (Canonical Ltd)
# Ubuntu Title Bold (Paulo Silva - not included in link below)
# Weather (Jonathan Macagba)
#
## Tips n' Tricks from Mr. Peachy, djyoung4, and 42dorian (Thanks!)
## Most necessary fonts can be downloaded here: http://ompldr.org/vOHdoag
## Unzip the fonts into your font folder, for example: /home/username/.fonts
## Run this command in a terminal (rebuilds font cache file): sudo fc-cache -fv
####
## Use XFT? Required to Force UTF8 (see below)
#
use_xft yes
xftfont DroidSans:size=8.75
xftalpha 0.1
####
## Force UTF8? Requires XFT (see above)
## Displays degree symbol, instead of °, etc.
#
override_utf8_locale yes
####
####
## This buffer is used for text, single lines, output from $exec, and other variables.
## Increasing the text buffer size (too high) will drastically reduce Conky's performance.
## Decreasing the size (too low) will truncate content and cause strange display output.
## Standard text buffer size is 256 bytes (cannot be less). Adjust YOUR buffer wisely!
#
text_buffer_size 6500
####
## Maximum number of special things, e.g. fonts, offsets, aligns, etc. (default is 512)
#
max_specials 600
####
## Daemonize Conky, aka 'fork to background'.
#
background yes
####
## Update interval in seconds.
#
update_interval 2.0
####
## The number of times Conky will update before quitting.
## Zero makes Conky run forever.
#
total_run_times 0
####
## Create own window in instead of using desktop?
#
own_window yes
own_window_transparent yes
own_window_type normal
own_window_class conky-semi
own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager
####
## Some distros also require the following 2 lines.
#
own_window_argb_visual yes
own_window_argb_value 255
####
## Force images to redraw when they change.
#
imlib_cache_size 0
####
## Use double buffering? Reduces flicker.
#
double_buffer yes
####
## Draw shades?
#
draw_shades yes
default_shade_color 392421
####
## Draw outlines?
#
draw_outline no
####
## Draw borders around text?
#
draw_borders no
####
## Draw borders around graphs?
#
draw_graph_borders no
####
## Print text to stdout?
## Print text in console?
#
out_to_ncurses no
out_to_console no
####
## Text alignment.
#
alignment top_right
####
## Minimum size of the text area.
## Syntax: minimum_size [width] [height]
#
minimum_size 240 1394
####
## Maximum width of the text area.
## Syntax: maximum_width [width]
#
maximum_width 240
####
## Gap between text and screen borders.
#
gap_x 6 ## Left / Right
gap_y 32 ## Top / Bottom
####
## Shorten MiB/GiB to M/G in stats.
#
short_units yes
####
## Pad % symbol spacing after numbers.
#
pad_percents 0
####
## Pad spacing between text and borders.
#
border_inner_margin 4
####
## Limit the length of names in "Top Processes".
#
top_name_width 10
####
## Subtract file system -/+buffers/cache from used memory?
## Set to yes, to produce meaningful physical memory stats.
#
no_buffers yes
####
## Set to yes, if you want all text to be in UPPERCASE.
#
uppercase no
####
## Number of cpu samples to average.
## Set to 1 to disable averaging.
#
cpu_avg_samples 2
####
## Number of net samples to average.
## Set to 1 to disable averaging.
#
net_avg_samples 2
####
## Add spaces to keep things from moving around?
## Only affects certain objects.
#
use_spacer right
####
## My colors (suit yourself)
#
color0 White #FFFFFF
color1 Ivory #FFFFF0
color2 Ivory2 #EEEEE0
color3 Ivory3 #CDCDC1
color4 Tan1 #FFA54F
color5 Tan2 #EE9A49
color6 Gray #7E7E7E
color7 AntiqueWhite4 #8B8378
color8 DimGray #696969
color9 Tomato #FF6347
#####
## Load Lua for shading (optional)
## Set the path to your script here.
#
lua_load ~/.conky/draw_bg.lua
lua_draw_hook_pre draw_bg
####
## Load Lua for bargraphs (required)
## Set the path to your script here.
#
lua_load ~/.conky/bargraph_small.lua
lua_draw_hook_post main_bars
TEXT
##################################
## LOGO ##
##################################
## Uncomment for hard-coded ID (static)
#${voffset -33}${font OpenLogos:size=103}${color2}v${font}${voffset -76}${goto 179}${font UbuntuTitleBold:size=19.6}${color4}1${offset 0}2${offset 0}.${offset 0}0${offset 0}4${font}
####
## Uncomment for soft-coded ID (dynamic)
${voffset -33}${font OpenLogos:size=103}${color2}v${font}${voffset -76}${goto 174}${font Boulder:size=19}${color4}${pre_exec cat /etc/*release | grep 'RELEASE' | awk -F'=' '{print $2}'}${font}
####
## Additional ID (branch version, code name, release date, etc.)
#${voffset 0}${goto 188}${font Ubuntu-B:size=9.1}${color4}Serbian${font}
#################################
## WEATHER ##
#################################
${voffset 15}${font DroidSans:bold:size=8}${color4}WEATHER${offset 8}${color4}${voffset -2}${hr 2}${font}
${execpi 900 conkywx -c /etc/conkywx/conkywx.conf -t /usr/share/conkywx/examples/wx-wu-vindsl-template|
####
## Windspeed [WS]
sed -e 's/Calm mph'/'\$\{offset 8\}Calm/g'|
####
## Moon Phases [MP]
sed -e 's/New Moon'/'\$\{offset -10\}New Moon/g'|
sed -e 's/Waxing Crescent'/'\$\{offset -3\}Waxing/g'|
sed -e 's/First Quarter'/'\$\{offset -3\}First Qtr/g'|
sed -e 's/Waxing Gibbous'/'\$\{offset -3\}Waxing/g'|
sed -e 's/Full Moon'/'\$\{offset -8\}Full Moon/g'|
sed -e 's/Waning Gibbous'/'\$\{offset -3\}Waning/g'|
sed -e 's/Last Quarter'/'\$\{offset -3\}Last Qtr/g'|
sed -e 's/Waning Crescent'/'\$\{offset -3\}Waning/g'
}${font}
##################################
## PROCESSORS ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}PROCESSORS${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU1${offset 5}${font DroidSans:size=8.3}${cpu cpu1}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu2}%${font}
${voffset 4}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU3${offset 5}${font DroidSans:size=8.3}${cpu cpu3}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU4${offset 5}${font DroidSans:size=8.3}${cpu cpu4}%${font}
##################################
## MEMORY ##
##################################
${voffset 5}${font DroidSans:bold:size=8}${color4}MEMORY${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 4}${font StyleBats:size=10}${color2}l${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 3}RAM${goto 97}${font DroidSans:size=8.3}${mem}${goto 133}/${offset 5}${memmax}${alignr}${memperc}%${font}
##################################
## HDD ##
##################################
${voffset 15}${font DroidSans:bold:size=8}${color4}HDD${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 6}${font StyleBats:size=9.9}${color2}x${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 4}ROOT${goto 95}${font DroidSans:size=8.3}${fs_used /}${goto 133}/${offset 5}${fs_size /}${alignr}${fs_free_perc /}%${font}
${voffset 15}${font StyleBats:size=9.9}${color2}x${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 4}HOME${goto 95}${font DroidSans:size=8.3}${fs_used /home}${goto 133}/${offset 5}${fs_size /home}${alignr}${fs_free_perc /home}%${font}
${voffset 15}${font StyleBats:size=9.9}${color2}4${voffset -2}${font DroidSansFallback:size=8.3}${color3}${offset 4}SWAP${goto 95}${font DroidSans:size=8.3}${swap}${goto 133}/${offset 5}${swapmax}${alignr}${swapperc}%${font}
${voffset 15}${font DroidSans:bold:size=8}${color4}TEMPERATURE ALERT${offset 8}${color5}${voffset 2}${hr 2}${font}
${goto 6}${voffset -2}${color1}${font Devil inside:size=12}1${font}${color6}${voffset -0}${goto 32}CPU Temp: ${alignr}${color6}${execi 30 sensors | grep 'Core 0' | cut -c16-17}°C / ${color6}${execi 30 sensors | grep 'Core 1' | cut -c16-17}°C
##################################
## TOP PROCESSES ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}TOP PROCESSES${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 6}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 1}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 1}${alignr}${top_mem mem 1}%${font}
${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 2}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 2}${alignr}${top_mem mem 2}%${font}
${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 3}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 3}${alignr}${top_mem mem 3}%${font}
${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 4}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 4}${alignr}${top_mem mem 4}%${font}
# ${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 5}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 5}${alignr}${top_mem mem 5}%${font}
# ${voffset 1}${font StyleBats:size=10}${color1}h${voffset -1}${font DroidSans:size=8.65}${color3}${offset 5}${top_mem name 6}${goto 120}${font DroidSans:size=8.3}${top_mem mem_res 6}${alignr}${top_mem mem 6}%${font}
##################################
## NETWORK ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}NETWORK${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}T${font DroidSans:size=8.65}${color3}${offset 2}$color Wifi Quality: ${color #07dbf4}${wireless_link_bar wlan0}
${voffset 3}${font PizzaDudeBullets:size=9.5}${color6}T${font DroidSans:size=8.65}${color3}${offset 5}Download${goto 120}${font DroidSans:size=8.3}${totaldown wlan0}${alignr}${font DroidSans:size=8.3}${downspeed wlan0}${font}
${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}N${font DroidSans:size=8.65}${color3}${offset 5}Upload${goto 120}${font DroidSans:size=8.3}${totalup wlan0}${alignr}${font DroidSans:size=8.3}${upspeed wlan0}${font}
${voffset 4}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Private${offset 3}IP${goto 123}${font DroidSansFallback:size=8.5}WLAN${alignr}${font DroidSans:size=8.3}${addr wlan0}${font}
#${voffset 0}${font PizzaDudeBullets:size=9.5}${color6}a${font DroidSans:size=8.65}${color3}${offset 5}Public${offset 7}IP${goto 121}${font DroidSansFallback:size=8.5}WAN${alignr}${font DroidSans:size=8.3}${execi 1800 wget -q -O - checkip.dyndns.org | sed -e 's/[^[:digit:]\|.]//g'}${font}
##################################
## TIME ##
##################################
${voffset -13}${font DroidSans:bold:size=8}${color4}TIME${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset -4}${font RadioSpace:size=36}${color3}${if_match ${time %l}<=9}${alignc 7}${time %H:%M}${else}${if_match ${time %l}>=10}${alignc -1}${time %H:%M}${endif}${endif}${font}
#${voffset 0}${font Roboto:size=6.2}${color4}${alignc 2}Izlazi${offset 2}${texeci 1800 conkyForecast --location=SRXX0005 --datatype=SR --startday=1}${color3}${offset 2}|${offset 2}${color4}Zalazi${offset 1}${texeci 1800 conkyForecast --location=SRXX0005 --datatype=SS --startday=1}${font}
##################################
## CALENDAR ##
##################################
${voffset 0}${font Roboto:bold:size=8}${color4}DATE${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 16}${font DroidSansMono:size=7.55}${color3}${alignc 60}${time %A}${font}
${voffset -4}${font DroidSansFallback:bold:size=18}${if_match ${time %e}<=9}${color5}${alignc 65}${time %e}${font}${else}${if_match ${time %e}>=10}${color5}${alignc 60}${time %e}${endif}${endif}${font}
${voffset 0}${font DroidSansMono:size=7.55}${color3}${alignc 60}${time %B}${font}
${voffset 0}${font DroidSansMono:size=7.6}${color3}${alignc 60}${time %Y}${font}
####
## Uncomment for Conky 1.8.0 (use mono fonts only)
${voffset -75}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; cal -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color4}&${color3}/'}
####
## Uncomment for Conky 1.8.1 (use mono fonts only)
#${voffset -75}${offset 100}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; cal -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e 's/\<'"$VinDSL_Cal_9"'\>/${color4}&${color3}/'}
## Uncomment for "SUNDAY = First Day-of-the-Week" (use mono fonts only)
#${voffset -70}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; cal -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color4}&${color3}/'}
####
## Uncomment for "MONDAY = First Day-of-the-Week" (use mono fonts only)
# ${voffset -68}${font DroidSansMono:size=7.55}${color3}${execpi 60 VinDSL_Cal_9=`date +%-d`; ncal -M -C -h | sed -e 's/\r//g' -e 's/^/ /g' -e '1d' -e s/^/"\$\{offset 100"\}/ -e 's/\<'"$VinDSL_Cal_9"'\>/${color4}&${color3}/'}
####
## Uncomment for border around today's date
${voffset -98}${font CutOutsFor3DFX:size=67}${color8}${alignc 99}2${font}
##################################
## SYSTEM ##
##################################
${voffset 20}${font DroidSans:bold:size=8.25}${color4}SYSTEM${offset 8}${color5}${voffset -2}${hr 2}${font}
${voffset 4}${font OpenLogos:size=10}${color2}u${voffset -4}${font DroidSans:size=8.6}${color3}${offset 5}${pre_exec lsb_release -sd || cat /etc/*release} Precise Pangolin${font}
${voffset 2}${offset -2}${font OpenLogos:size=12}${color2}Z${voffset -4}${font DroidSans:size=8.6}${color3}${offset 3}${sysname}${offset 3}${kernel}${alignr}${font DroidSans:size=8.3}${machine}${font}
${voffset 2}${font StyleBats:size=10}${color2}d${voffset -2}${font DroidSans:size=8.6}${color3}${offset 5}Intel GMA X3150${alignr}${font DroidSans:size=8.3}
${voffset 2}${font StyleBats:size=10}${color2}A${voffset -1}${font DroidSans:size=8.6}${color3}${offset 5}Intel®${offset 3}Atom™${offset 3}CPU${offset 3}N550${alignr 1}${font DroidSans:size=8.3}${freq_g cpu0}${offset 1}GHz${font}
${voffset 2}${font StyleBats:size=10}${color2}q${voffset -1}${font DroidSans:size=8.6}${color3}${offset 5}System${offset 3}Uptime${alignr}${font DroidSans:size=8.3}${uptime_short}${font}
and here is my code for bargraph_small:
Code:
--[[
BARGRAPH WIDGET
v2.1 by wlourf (07 Jan. 2011)
this widget draws a bargraph with different effects
http://u-scripts.blogspot.com/2010/07/bargraph-widget.html
To call the script in a conky, use, before TEXT
lua_load /path/to/the/script/bargraph.lua
lua_draw_hook_pre main_rings
and add one line (blank or not) after TEXT
Parameters are :
3 parameters are mandatory
name - the name of the conky variable to display, for example for {$cpu cpu0}, just write name="cpu"
arg - the argument of the above variable, for example for {$cpu cpu0}, just write arg="cpu0"
arg can be a numerical value if name=""
max - the maximum value the above variable can reach, for example, for {$cpu cpu0}, just write max=100
Optional parameters:
x,y - coordinates of the starting point of the bar, default = middle of the conky window
cap - end of cap line, ossibles values are r,b,s (for round, butt, square), default="b"
http://www.cairographics.org/samples/set_line_cap/
angle - angle of rotation of the bar in degress, default = 0 (i.e. a vertical bar)
set to 90 for an horizontal bar
skew_x - skew bar around x axis, default = 0
skew_y - skew bar around y axis, default = 0
blocks - number of blocks to display for a bar (values >0) , default= 10
height - height of a block, default=10 pixels
width - width of a block, default=20 pixels
space - space between 2 blocks, default=2 pixels
angle_bar - this angle is used to draw a bar on a circular way (ok, this is no more a bar !) default=0
radius - for cicular bars, internal radius, default=0
with radius, parameter width has no more effect.
Colours below are defined into braces {colour in hexadecimal, alpha}
fg_colour - colour of a block ON, default= {0x00FF00,1}
bg_colour - colour of a block OFF, default = {0x00FF00,0.5}
alarm - threshold, values after this threshold will use alarm_colour colour , default=max
alarm_colour - colour of a block greater than alarm, default=fg_colour
smooth - (true or false), create a gradient from fg_colour to bg_colour, default=false
mid_colour - colours to add to gradient, with this syntax {position into the gradient (0 to1), colour hexa, alpha}
for example, this table {{0.25,0xff0000,1},{0.5,0x00ff00,1},{0.75,0x0000ff,1}} will add
3 colours to gradient created by fg_colour and alarm_colour, default=no mid_colour
led_effect - add LED effects to each block, default=no led_effect
if smooth=true, led_effect is not used
possibles values : "r","a","e" for radial, parallel, perdendicular to the bar (just try!)
led_effect has to be used with theses colours :
fg_led - middle colour of a block ON, default = fg_colour
bg_led - middle colour of a block OFF, default = bg_colour
alarm_led - middle colour of a block > ALARM, default = alarm_colour
reflection parameters, not available for circular bars
reflection_alpha - add a reflection effect (values from 0 to 1) default = 0 = no reflection
other values = starting opacity
reflection_scale - scale of the reflection (default = 1 = height of text)
reflection_length - length of reflection, define where the opacity will be set to zero
values from 0 to 1, default =1
reflection - position of reflection, relative to a vertical bar, default="b"
possibles values are : "b","t","l","r" for bottom, top, left, right
draw_me - if set to false, text is not drawn (default = true or 1)
it can be used with a conky string, if the string returns 1, the text is drawn :
example : "${if_empty ${wireless_essid wlan0}}${else}1$endif",
v1.0 (10 Feb. 2010) original release
v1.1 (13 Feb. 2010) numeric values can be passed instead conky stats with parameters name="", arg = numeric_value
v1.2 (28 Feb. 2010) just renamed the widget to bargraph
v1.3 (03 Mar. 2010) added parameters radius & angle_bar to draw the bar in a circular way
v2.0 (12 Jul. 2010) rewrite script + add reflection effects and parameters are now set into tables
v2.1 (07 Jan. 2011) Add draw_me parameter and correct memory leaks, thanks to "Creamy Goodness"
-- This program is free software; you can redistribute it and/or modify
-- it under the terms of the GNU General Public License as published by
-- the Free Software Foundation version 3 (GPLv3)
--
-- This program is distributed in the hope that it will be useful,
-- but WITHOUT ANY WARRANTY; without even the implied warranty of
-- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-- GNU General Public License for more details.
--
-- You should have received a copy of the GNU General Public License
-- along with this program; if not, write to the Free Software
-- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
-- MA 02110-1301, USA.
]]
require 'cairo'
----------------START OF PARAMETERS ----------
function conky_main_bars()
local bars_settings={
{ --[ Graph for CPU1 ]--
name="cpu",
arg="cpu1",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=82,y=347,
blocks=55,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for CPU2 ]--
name="cpu",
arg="cpu2",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=82,y=362,
blocks=55,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for CPU3 ]--
name="cpu",
arg="cpu3",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=82,y=378,
blocks=55,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for CPU4 ]--
name="cpu",
arg="cpu4",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=82,y=394,
blocks=55,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for Memory ]--
name="memperc",
arg="",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=15,y=442,
blocks=77,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for Root ]--
name="fs_used_perc",
arg="/",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=15,y=489,
blocks=77,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for Home ]--
name="fs_used_perc",
arg="/home",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=15,y=519,
blocks=77,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
{ --[ Graph for Swap ]--
name="swapperc",
arg="",
max=100,
alarm=50,
alarm_colour={0xFF0000,0.72},
bg_colour={0xFFFFFF,0.25},
fg_colour={0x00FF00,0.55},
mid_colour={{0.45,0xFFFF00,0.70}},
x=15,y=546,
blocks=77,
space=1,
height=2,width=5,
angle=90,
smooth=true
},
}
-----------END OF PARAMETERS--------------
if conky_window == nil then return end
local cs = cairo_xlib_surface_create(conky_window.display, conky_window.drawable, conky_window.visual, conky_window.width, conky_window.height)
cr = cairo_create(cs)
--prevent segmentation error when reading cpu state
if tonumber(conky_parse('${updates}'))>3 then
for i in pairs(bars_settings) do
draw_multi_bar_graph(bars_settings[i])
end
end
cairo_destroy(cr)
cairo_surface_destroy(cs)
cr=nil
end
function draw_multi_bar_graph(t)
cairo_save(cr)
--check values
if t.draw_me == true then t.draw_me = nil end
if t.draw_me ~= nil and conky_parse(tostring(t.draw_me)) ~= "1" then return end
if t.name==nil and t.arg==nil then
print ("No input values ... use parameters 'name' with 'arg' or only parameter 'arg' ")
return
end
if t.max==nil then
print ("No maximum value defined, use 'max'")
return
end
if t.name==nil then t.name="" end
if t.arg==nil then t.arg="" end
--set default values
if t.x == nil then t.x = conky_window.width/2 end
if t.y == nil then t.y = conky_window.height/2 end
if t.blocks == nil then t.blocks=10 end
if t.height == nil then t.height=10 end
if t.angle == nil then t.angle=0 end
t.angle = t.angle*math.pi/180
--line cap style
if t.cap==nil then t.cap = "b" end
local cap="b"
for i,v in ipairs({"s","r","b"}) do
if v==t.cap then cap=v end
end
local delta=0
if t.cap=="r" or t.cap=="s" then delta = t.height end
if cap=="s" then cap = CAIRO_LINE_CAP_SQUARE
elseif cap=="r" then
cap = CAIRO_LINE_CAP_ROUND
elseif cap=="b" then
cap = CAIRO_LINE_CAP_BUTT
end
--end line cap style
--if t.led_effect == nil then t.led_effect="r" end
if t.width == nil then t.width=20 end
if t.space == nil then t.space=2 end
if t.radius == nil then t.radius=0 end
if t.angle_bar == nil then t.angle_bar=0 end
t.angle_bar = t.angle_bar*math.pi/360 --halt angle
--colours
if t.bg_colour == nil then t.bg_colour = {0x00FF00,0.5} end
if #t.bg_colour~=2 then t.bg_colour = {0x00FF00,0.5} end
if t.fg_colour == nil then t.fg_colour = {0x00FF00,1} end
if #t.fg_colour~=2 then t.fg_colour = {0x00FF00,1} end
if t.alarm_colour == nil then t.alarm_colour = t.fg_colour end
if #t.alarm_colour~=2 then t.alarm_colour = t.fg_colour end
if t.mid_colour ~= nil then
for i=1, #t.mid_colour do
if #t.mid_colour[i]~=3 then
print ("error in mid_color table")
t.mid_colour[i]={1,0xFFFFFF,1}
end
end
end
if t.bg_led ~= nil and #t.bg_led~=2 then t.bg_led = t.bg_colour end
if t.fg_led ~= nil and #t.fg_led~=2 then t.fg_led = t.fg_colour end
if t.alarm_led~= nil and #t.alarm_led~=2 then t.alarm_led = t.fg_led end
if t.led_effect~=nil then
if t.bg_led == nil then t.bg_led = t.bg_colour end
if t.fg_led == nil then t.fg_led = t.fg_colour end
if t.alarm_led == nil then t.alarm_led = t.fg_led end
end
if t.alarm==nil then t.alarm = t.max end --0.8*t.max end
if t.smooth == nil then t.smooth = false end
if t.skew_x == nil then
t.skew_x=0
else
t.skew_x = math.pi*t.skew_x/180
end
if t.skew_y == nil then
t.skew_y=0
else
t.skew_y = math.pi*t.skew_y/180
end
if t.reflection_alpha==nil then t.reflection_alpha=0 end
if t.reflection_length==nil then t.reflection_length=1 end
if t.reflection_scale==nil then t.reflection_scale=1 end
--end of default values
local function rgb_to_r_g_b(col_a)
return ((col_a[1] / 0x10000) % 0x100) / 255., ((col_a[1] / 0x100) % 0x100) / 255., (col_a[1] % 0x100) / 255., col_a[2]
end
--functions used to create patterns
local function create_smooth_linear_gradient(x0,y0,x1,y1)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_smooth_radial_gradient(x0,y0,r0,x1,y1,r1)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(t.fg_colour))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(t.alarm_colour))
if t.mid_colour ~=nil then
for i=1, #t.mid_colour do
cairo_pattern_add_color_stop_rgba (pat, t.mid_colour[i][1], rgb_to_r_g_b({t.mid_colour[i][2],t.mid_colour[i][3]}))
end
end
return pat
end
local function create_led_linear_gradient(x0,y0,x1,y1,col_alp,col_led)
local pat = cairo_pattern_create_linear (x0,y0,x1,y1) ---delta, 0,delta+ t.width,0)
cairo_pattern_add_color_stop_rgba (pat, 0.0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1.0, rgb_to_r_g_b(col_alp))
return pat
end
local function create_led_radial_gradient(x0,y0,r0,x1,y1,r1,col_alp,col_led,mode)
local pat = cairo_pattern_create_radial (x0,y0,r0,x1,y1,r1)
if mode==3 then
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_alp))
cairo_pattern_add_color_stop_rgba (pat, 0.5, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
else
cairo_pattern_add_color_stop_rgba (pat, 0, rgb_to_r_g_b(col_led))
cairo_pattern_add_color_stop_rgba (pat, 1, rgb_to_r_g_b(col_alp))
end
return pat
end
local function draw_single_bar()
--this fucntion is used for bars with a single block (blocks=1) but
--the drawing is cut in 3 blocks : value/alarm/background
--not zvzimzblr for circular bar
local function create_pattern(col_alp,col_led,bg)
local pat
if not t.smooth then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, 0,t.width/2,-t.height,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, -t.height/2, 0, t.width/2,-t.height/2,t.height/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if bg then
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
else
pat = create_smooth_linear_gradient(t.width/2, 0, t.width/2,-t.height)
end
end
return pat
end
local y1=-t.height*pct/100
local y2,y3
if pct>(100*t.alarm/t.max) then
y1 = -t.height*t.alarm/100
y2 = -t.height*pct/100
if t.smooth then y1=y2 end
end
if t.angle_bar==0 then
--block for fg value
local pat = create_pattern(t.fg_colour,t.fg_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,0,t.width,y1)
cairo_fill(cr)
cairo_pattern_destroy(pat)
-- block for alarm value
if not t.smooth and y2 ~=nil then
pat = create_pattern(t.alarm_colour,t.alarm_led,false)
cairo_set_source(cr,pat)
cairo_rectangle(cr,0,y1,t.width,y2-y1)
cairo_fill(cr)
y3=y2
cairo_pattern_destroy(pat)
else
y2,y3=y1,y1
end
-- block for bg value
cairo_rectangle(cr,0,y2,t.width,-t.height-y3)
pat = create_pattern(t.bg_colour,t.bg_led,true)
cairo_set_source(cr,pat)
cairo_pattern_destroy(pat)
cairo_fill(cr)
end
end --end single bar
local function draw_multi_bar()
--function used for bars with 2 or more blocks
for pt = 1,t.blocks do
--set block y
local y1 = -(pt-1)*(t.height+t.space)
local light_on=false
--set colors
local col_alp = t.bg_colour
local col_led = t.bg_led
if pct>=(100/t.blocks) or pct>0 then --ligth on or not the block
if pct>=(pcb*(pt-1)) then
light_on = true
col_alp = t.fg_colour
col_led = t.fg_led
if pct>=(100*t.alarm/t.max) and (pcb*pt)>(100*t.alarm/t.max) then
col_alp = t.alarm_colour
col_led = t.alarm_led
end
end
end
--set colors
--have to try to create gradients outside the loop ?
local pat
if not t.smooth then
if t.angle_bar==0 then
if t.led_effect=="e" then
pat = create_led_linear_gradient (-delta, 0,delta+ t.width,0,col_alp,col_led)
elseif t.led_effect=="a" then
pat = create_led_linear_gradient (t.width/2, -t.height/2+y1,t.width/2,0+t.height/2+y1,col_alp,col_led)
elseif t.led_effect=="r" then
pat = create_led_radial_gradient (t.width/2, y1, 0, t.width/2,y1,t.width/1.5,col_alp,col_led,2)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
else
if t.led_effect=="a" then
pat = create_led_radial_gradient (0, 0, t.radius+(t.height+t.space)*(pt-1),
0, 0, t.radius+(t.height+t.space)*(pt),
col_alp,col_led,3)
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(col_alp))
end
end
else
if light_on then
if t.angle_bar==0 then
pat = create_smooth_linear_gradient(t.width/2, t.height/2, t.width/2,-(t.blocks-0.5)*(t.height+t.space))
else
pat = create_smooth_radial_gradient(0, 0, (t.height+t.space), 0,0,(t.blocks+1)*(t.height+t.space),2)
end
else
pat = cairo_pattern_create_rgba (rgb_to_r_g_b(t.bg_colour))
end
end
cairo_set_source (cr, pat)
cairo_pattern_destroy(pat)
--draw a block
if t.angle_bar==0 then
cairo_move_to(cr,0,y1)
cairo_line_to(cr,t.width,y1)
else
cairo_arc( cr,0,0,
t.radius+(t.height+t.space)*(pt)-t.height/2,
-t.angle_bar -math.pi/2 ,
t.angle_bar -math.pi/2)
end
cairo_stroke(cr)
end
end
local function setup_bar_graph()
--function used to retrieve the value to display and to set the cairo structure
if t.blocks ~=1 then t.y=t.y-t.height/2 end
local value = 0
if t.name ~="" then
value = tonumber(conky_parse(string.format('${%s %s}', t.name, t.arg)))
--$to_bytes doesn't work when value has a decimal point,
--https://garage.maemo.org/plugins/ggit/browse.php/?p=monky;a=commitdiff;h=174c256c81a027a2ea406f5f37dc036fac0a524b;hp=d75e2db5ed3fc788fb8514121f67316ac3e5f29f
--http://sourceforge.net/tracker/index.php?func=detail&aid=3000865&group_id=143975&atid=757310
--conky bug?
--value = (conky_parse(string.format('${%s %s}', t.name, t.arg)))
--if string.match(value,"%w") then
-- value = conky_parse(string.format('${to_bytes %s}',value))
--end
else
value = tonumber(t.arg)
end
if value==nil then value =0 end
pct = 100*value/t.max
pcb = 100/t.blocks
cairo_set_line_width (cr, t.height)
cairo_set_line_cap (cr, cap)
cairo_translate(cr,t.x,t.y)
cairo_rotate(cr,t.angle)
local matrix0 = cairo_matrix_t:create()
tolua.takeownership(matrix0)
cairo_matrix_init (matrix0, 1,t.skew_y,t.skew_x,1,0,0)
cairo_transform(cr,matrix0)
--call the drawing function for blocks
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
if t.reflection=="t" or t.reflection=="b" then cairo_translate(cr,0,-t.height) end
else
draw_multi_bar()
end
--dot for reminder
--[[
if t.blocks ~=1 then
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,t.height/2,3,0,2*math.pi)
cairo_fill(cr)
else
cairo_set_source_rgba(cr,1,0,0,1)
cairo_arc(cr,0,0,3,0,2*math.pi)
cairo_fill(cr)
end]]
--call the drawing function for reflection and prepare the mask used
if t.reflection_alpha>0 and t.angle_bar==0 then
local pat2
local matrix1 = cairo_matrix_t:create()
tolua.takeownership(matrix1)
if t.angle_bar==0 then
pts={-delta/2,(t.height+t.space)/2,t.width+delta,-(t.height+t.space)*(t.blocks)}
if t.reflection=="t" then
cairo_matrix_init (matrix1,1,0,0,-t.reflection_scale,0,-(t.height+t.space)*(t.blocks-0.5)*2*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,-(t.height+t.space)*(t.blocks),t.width/2,(t.height+t.space)/2)
elseif t.reflection=="r" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,delta+2*t.width,0)
pat2 = cairo_pattern_create_linear (delta/2+t.width,0,-delta/2,0)
elseif t.reflection=="l" then
cairo_matrix_init (matrix1,-t.reflection_scale,0,0,1,-delta,0)
pat2 = cairo_pattern_create_linear (-delta/2,0,delta/2+t.width,-0)
else --bottom
cairo_matrix_init (matrix1,1,0,0,-1*t.reflection_scale,0,(t.height+t.space)*(t.reflection_scale+1)/2)
pat2 = cairo_pattern_create_linear (t.width/2,(t.height+t.space)/2,t.width/2,-(t.height+t.space)*(t.blocks))
end
end
cairo_transform(cr,matrix1)
if t.blocks==1 and t.angle_bar==0 then
draw_single_bar()
cairo_translate(cr,0,-t.height/2)
else
draw_multi_bar()
end
cairo_set_line_width(cr,0.01)
cairo_pattern_add_color_stop_rgba (pat2, 0,0,0,0,1-t.reflection_alpha)
cairo_pattern_add_color_stop_rgba (pat2, t.reflection_length,0,0,0,1)
if t.angle_bar==0 then
cairo_rectangle(cr,pts[1],pts[2],pts[3],pts[4])
end
cairo_clip_preserve(cr)
cairo_set_operator(cr,CAIRO_OPERATOR_CLEAR)
cairo_stroke(cr)
cairo_mask(cr,pat2)
cairo_pattern_destroy(pat2)
cairo_set_operator(cr,CAIRO_OPERATOR_OVER)
end --reflection
pct,pcb=nil
end --setup_bar_graph()
--start here !
setup_bar_graph()
cairo_restore(cr)
end
Re: HOWTO: VinDSL Conky Script
Quote:
Originally Posted by
Cavsfan
Hi VinDSL!
Thanks!
HI
Code:
##################################
## PROCESSORS ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}PROCESSORS${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU1${offset 5}${font DroidSans:size=8.3}${cpu cpu1}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu2}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu3}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu4}%${font}
Here is the cpu issue - you may need to adjust the voffset for vertical spacing .
I am not sure about the avatars - Vin or someone else can sort that for you :)
cheers :D
Re: HOWTO: VinDSL Conky Script
Quote:
Originally Posted by
paramvir
HI
Code:
##################################
## PROCESSORS ##
##################################
${voffset 4}${font DroidSans:bold:size=8}${color4}PROCESSORS${offset 8}${color6}${voffset -2}${hr 1}${font}
${voffset 4}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU1${offset 5}${font DroidSans:size=8.3}${cpu cpu1}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu2}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu3}%${font}
${voffset 2}${font StyleBats:size=9.9}${color2}k${voffset -2}${font DroidSansFallback:size=8.39}${color3}${offset 2}CPU2${offset 5}${font DroidSans:size=8.3}${cpu cpu4}%${font}
Here is the cpu issue - you may need to adjust the voffset for vertical spacing .
I am not sure about the avatars - Vin or someone else can sort that for you :)
cheers :D
Thanks paramvir! I'll try that. After messing with the weather for 3-4 hours I finally got it working.
Finally had to tell it not to use XML ID use_xml=0 and Bam it used the location successfully.
I'm pretty excited as I have not had weather in my conky since the weather channel dropped us. :(