How To Compile the new 2.6.16 kernel from kernel.org
I just finished compiling the newest 2.6.16 kernel from kernel.org and I am getting much better performance. In what follows, I will show you how to compile and configure the latest kernel. You do not need to use the 2.6.16 kernel but it is the first kernel of the release kernel and performance patches are only made for these releases. (ex: 2.6.16, 2.6.17 NOT 2.6.16.20) Feel free to compile a kernel besides the first release cycle kernel. You do not need the patch and you can configure the kernel for maxium speed in xconfig. A tutorial to optimize the kernel you are building can be found here.
Before you begin, you will need to get a kernel
Download the 2.6.16 kernel and it's performance patch: The 2.6.16 kernel
Latest Kernel Patch Don't apply the patch if you are compiling a kernel other then 2.6.16 otherwise the kernel will not compile.
Check out kernel.org for the latest stable/release canidate kernel.
1. Install needed utilities to configure the kernel
Quote:
sudo apt-get install build-essential bin86 kernel-package libqt3-headers libqt3-mt-dev
2. Now we are going to move the kernel and unpack it.
Quote:
sudo cp linux-2.6.16.tar.bz2 /usr/src
3. Now we are going to move to /usr/src
4. Now unpack it:
Quote:
sudo tar -xvjf linux-2.6.16.tar.bz2
5. Rename the folder: ONLY needed for 2.6.16 kernel ! You don't need to do this.
Quote:
sudo mv linux-2.6.16/ linux-2.6.16ck12
6. Now we are going to remove the link to the linux directory:
7. Make a new link to the new kernel:
Quote:
sudo ln -s /usr/src/linux-2.6.16ck12 linux
8. Move to the Linux directory:
9. Make yourself root:
10. Apply the performance patch: Don't use if you are not patching the 2.6.16 kernel !
Quote:
bzcat /home/$USER/patch-2.6.16-ck12.bz2| patch -p1
11. Now we are going to import your current kernel configuration:
12. Now import it: Make sure to replace the kernel version in this following command from the one from uname -r.
Quote:
sudo cp /boot/config-2.6.14-ck1 .config
13.Configure the kernel:
Here are some performance tips from this thread.
Quote:
In "General Setup" activate:
-Support for paging of anonymous memory (swap)
--Support for prefetching swapped memory
In "Processor type and features":
-Processor family Choose the model of your processor.
Activate:
-Preemption Model
--Voluntary Kernel Preemption (Desktop)
-High Memory Support
--off -if you have less than 1 GB of RAM
--1GB Low Memory Support -if you have 1GB of RAM
--4GB -if you have more than 1GB of RAM
-Timer frequency
--1000 Hz
In "Device drivers" go to "Block devices" and in "IO Schedulers" leave only the "CFQ I/O scheduler" activated, which provides the best performance.
In "Kernel hacking" uncheck "Kernel debugging".
Ctrl+S to save the kernel configuration and then close the window.
Note: Not all the options will be the same in newer kernels.
14. Let's build the kernel: Make sure that you are in /usr/src/linux with full root access. Make sure that you are. This will build a debian file that you can install.
Now, in terminal do the following:
Quote:
make-kpkg clean
make-kpkg -initrd --revision=ck12 kernel_image kernel_headers modules_image
Note: You can replace "ck12" with anything you want. Like "k7" or "686."
15. Install the .deb fine in /usr/src. In terminal do
Quote:
sudo dpkg -i <name of the file>
Now reboot and you will have a much faster system !
-------------------------------------------------------------------------
How I learned to do this:
2.6.14 Vanilla Kernel I based my tutorial on this thread. Thank you for writing this tutorial RubenGonc !
And I also learned some stuff from this thread
-------------------------------------------------------------------------
Troubleshooting:
Q: My Wifi Doesn't work !
A:To get wifi working, compile the new ndiswrapper from source. Follow the tutorial.
Q: When I reboot I get Grub Error 22 ! WTF ???
A: You may have missed a step or messed something up. When it says Grub Loading..... press esc and you will be able to boot with another kernel. Then you should go into synaptic and uninstall the broken kernel and then reompile it.
--------------------------------------------------------------------------------
Q: How can I get fglrx and DRI working on my new kernel ?
A: Type this in terminal:
Quote:
sudo apt-get install fglrx-kernel-source
Reboot and if that does not work, make sure fglrx is in the Driver section.
---------------------------------------------------------------------------------
Q: I need kernel headers for my custom kernel.
A: I updated the howto and edited the last step to build a kernel image, kernel module image, and kernel headers. Thank you to tseliot for his kernel thread because I found the command there. You can view the thread here.
------------------------------------------------------------------------------------
Q: I want to optimize my kernel ! What do I select ???
A: I just wrote this tutorial on how to configure your kernel for enhanced performance. I hope it helps.
----------------------------------------------------------------------------------------
Q: Why did you write this tutorial ?
A: I wrote this tutorial to help give back to the Ubuntu community. I've had such a good expericence with ubuntu that I want to help others. This community is great :)
Re: How To Compile the new 2.6.16 kernel from kernel.org
should be name of file for 16th step
also didn't work for me, there is no option to boot the 2.6.16 kernel in my grub
Re: How To Compile the new 2.6.16 kernel from kernel.org
Did you try manually adding the parameters to /boot/grub/menu.lst?
Re: How To Compile the new 2.6.16 kernel from kernel.org
Quote:
Originally Posted by Juanito
Did you try manually adding the parameters to /boot/grub/menu.lst?
or sudo update-grub. I just ran through the tutorial again and I compilied the kernel and the set it up and it worked.
Re: How To Compile the new 2.6.16 kernel from kernel.org
weird, it shows in the menu.lst. but not in my grub. ran update-grub too and it shows up there, but not on boot
Re: How To Compile the new 2.6.16 kernel from kernel.org
Quote:
Originally Posted by dicecca112
weird, it shows in the menu.lst. but not in my grub. ran update-grub too and it shows up there, but not on boot
That's weird...check if it's hidden. Also, after upgrading up to this kernel, my sound works and it never did before !
Re: How To Compile the new 2.6.16 kernel from kernel.org
how come the path reads number-cks3 and on step 8 it says sudo ln -s /usr/src/linux-2.6.16ck3 linux
Re: How To Compile the new 2.6.16 kernel from kernel.org
I copied and pasted everything and succeeded! now I can suspend and resume!!!!! but I still don't have wifi.
Re: How To Compile the new 2.6.16 kernel from kernel.org
To get usplash you need to make sure you enable this in the config:
Graphics support:
-VGA 16-color graphics support - module (m)
-VESA VGA graphics support - build in kernel (y)
Console display driver support:
-VGA text console and Video mode selection support- build in kernel (y)
-MDA text console-module (m)
-Framebuffer Console and Framebuffer Console Rotation support-build in kernel (y)
Not sure how to change from "m" to "y" and vice versa in xconfig so I opened the .config file in gedit and checked it manually.
Archck patch includes the Con Kolivas patch but with lots of other cool things too like acpi updates and suspend2 but I had trouble compiling it.
It's here if you wanna hava a go: http://iphitus.loudas.com/archck.php
Re: How To Compile the new 2.6.16 kernel from kernel.org
